ath9k-devel.lists.ath9k.org archive mirror
 help / color / mirror / Atom feed
From: Paolo <deepwave@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] AR9485 on acer one d257 disconnects and hangs very often (ath: Failed to stop TX DMA!)
Date: Mon, 26 Dec 2011 23:25:29 +0100	[thread overview]
Message-ID: <4EF8F459.2010606@gmail.com> (raw)

Hello,
I've bought a new Acer One D257 with AR9485 as wireless card, I run 
Debian Squeeze and I can't find a way to use it.

In fact, very often the connection hangs and the wireless device becomes 
totally frozen; there is nothing I can do to avoid reboot to make it 
working again.

In dmesg output, I find lots of lines like these ones:

ath: Failed to stop TX DMA in 100 msec after killing last frame
ath: Failed to stop TX DMA!
ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: Chip reset failed
ath: Unable to reset channel (2467 MHz), reset status -22
ath: Unable to set channel
ath: Failed to stop TX DMA in 100 msec after killing last frame
ath: Failed to stop TX DMA!


If I try to rmmod the aht9k module and insert it again, i find these lines:

ath9k Refused to change power state, currently in D3
ath: Couldn't reset chip
ath: Unable to initialize hardware; initialization status: -5


I've this problem with all these kernels:

- kernel 2.6.32 from Debian Squeeze
- kernel 2.6.39 from Debian Squeeze-Backports
- kernel 3.1.6 compiled by me from the source of kernel.org, with the 
same config of original Debain 3.1 kernel

Disabling ipv6, bluetooth and nohwcrypt option in module has no effect.
Using wicd or network-manager is the same.

What else can I do?
Please give me some infos about it...
Thanks, Paolo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20111226/4003a840/attachment.htm 

             reply	other threads:[~2011-12-26 22:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-26 22:25 Paolo [this message]
2011-12-27  5:10 ` [ath9k-devel] AR9485 on acer one d257 disconnects and hangs very often (ath: Failed to stop TX DMA!) Mohammed Shafi
2011-12-27 16:05   ` Paolo
2011-12-27  6:28 ` Mohammed Shafi
2012-10-25 15:23   ` Karen is getting crafty!
  -- strict thread matches above, loose matches on Subject: below --
2011-12-26 22:21 Paolo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EF8F459.2010606@gmail.com \
    --to=deepwave@gmail.com \
    --cc=ath9k-devel@lists.ath9k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).