From: Ali Abedi <a2abedi@uwaterloo.ca>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] Channel busy cycles
Date: Wed, 31 Oct 2012 14:54:44 -0400 [thread overview]
Message-ID: <509173F4.7070502@mailservices.uwaterloo.ca> (raw)
In-Reply-To: <509168B9.7000508@mailservices.uwaterloo.ca>
Here is an update from me.
I added a round-robin rate adaptation that cycles through all 11g rates
and I measured busy - (TX-RX) for all rates. This measure (busy - (TX +
RX)) does not decrease as we increase transmission rate all the time.
There are anomalies like rate 18. Please see the plot.
config:
802.11g, 1 sender 1 receiver, channel cycle information is collection at
sender. Retry 1. RTS/CTS off.
I can generate the plot for RTS/CTS on, let me know if you want to see it.
Thanks,
Ali
On 10/30/2012 09:29 PM, Adrian Chadd wrote:
> I've asked; SIFS is the only thing that's come back thus far.
>
>
>
> Adrian
>
>
> On 30 October 2012 18:24, Ali Abedi<a2abedi@uwaterloo.ca> wrote:
>> Hi Adrian,
>>
>> Thanks for asking. Is there any update?
>> I think NAV is not the issue at least in our current setup, since we have
>> only one sender. And I collect channel cycle information at the sender, so
>> the only thing it receives are acks and beacons.
>>
>> Thanks,
>> Ali
>>
>>
>>
>>
>> On 10/28/2012 11:54 PM, Adrian Chadd wrote:
>>> On 28 October 2012 20:49, Wright, Brett
>>> <Brett.Wright@cooperindustries.com> wrote:
>>>>> On 28 October 2012 15:12, Ali Abedi<a2abedi@uwaterloo.ca> wrote:
>>>>>> Thanks for mentioning this. It is important to check these things,
>>>> but
>>>>>> it did not affect the numbers. I really suspect that some portion of
>>>>>> frames are considered "busy" but not tx or rx.
>>>> I was thinking that perhaps busy includes virtual carrier sense (i.e
>>>> NAV) as well as busy due to CCA/noise?
>>> It does include CCA/noise. No idea about VCS/NAV. I thought it was
>>> controlled by a line from the BB (RX_CLEAR) rather than VCS/NAV, which
>>> is a MAC counter function. But I could be wrong.
>>>
>>> I've punted the question internally; I'll post back when I have more
>>> details.
>>>
>>> These can be easily tested though - just fake some NAV entries and see
>>> if your busy counters go up.
>>>
>>>
>>>
>>> Adrian
>>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: plot.pdf
Type: application/pdf
Size: 160920 bytes
Desc: not available
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20121031/e935b84c/attachment-0001.pdf
next prev parent reply other threads:[~2012-10-31 18:54 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-21 2:32 [ath9k-devel] ath9k_htc and reported mactime Thomas Pedersen
2012-10-21 2:41 ` Thomas Pedersen
2012-10-22 14:31 ` Adrian Chadd
2012-10-23 19:06 ` [ath9k-devel] Performance degradation when monitor interface is enabled Ali Abedi
2012-10-23 19:20 ` Adrian Chadd
2012-10-23 20:36 ` Ali Abedi
2012-10-23 20:51 ` Adrian Chadd
2012-10-25 19:46 ` Ali Abedi
2012-10-25 19:52 ` abhinav narain
2012-10-27 19:24 ` [ath9k-devel] Channel busy cycles Ali Abedi
2012-10-27 23:42 ` Adrian Chadd
2012-10-27 23:50 ` Ali Abedi
2012-10-28 6:25 ` Adrian Chadd
2012-10-28 13:59 ` Ali Abedi
2012-10-28 18:40 ` Adrian Chadd
[not found] ` <508DADC6.9080309@mailservices.uwaterloo.ca>
2012-10-29 2:33 ` Adrian Chadd
2012-10-29 3:49 ` Wright, Brett
2012-10-29 3:54 ` Adrian Chadd
[not found] ` <50907DD8.1030607@mailservices.uwaterloo.ca>
[not found] ` <CAJ-Vmo=E_iDMYO6sP7dVqfnNFTMR1xKT5Y4-7dDGL2EPYqt0cA@mail.gmail.com>
[not found] ` <509168B9.7000508@mailservices.uwaterloo.ca>
2012-10-31 18:54 ` Ali Abedi [this message]
[not found] ` <CAJ-Vmok=5kzx_5swJm1UOz=4U2vM0YgChGnxvVX45hdpm-=aCQ@mail.gmail.com>
[not found] ` <48EC4E8D43A28947B1AB2639FA97CDB90C0480BC@nasanexd02a.na.qualcomm.com>
[not found] ` <1938DD2280AE524AAB886A6036F7922A23476EE8@nasanexd02a.na.qualcomm.com>
[not found] ` <48EC4E8D43A28947B1AB2639FA97CDB90C0480E3@nasanexd02a.na.qualcomm.com>
[not found] ` <A61E02718FA45C4797F54E7EF4F2EC8F2384EFAF@nasanexd02a.na.qualcomm.com>
[not found] ` <48EC4E8D43A28947B1AB2639FA97CDB90C048ECC@nasanexd02a.na.qualcomm.com>
2012-11-09 21:34 ` [ath9k-devel] Fwd: FW: " Adrian Chadd
2012-11-11 5:02 ` Ali Abedi
2012-11-11 16:10 ` Adrian Chadd
2012-10-24 19:45 ` [ath9k-devel] ath9k_htc and reported mactime Thomas Pedersen
2012-10-24 21:22 ` Adrian Chadd
2012-10-24 21:26 ` Adrian Chadd
2012-10-24 22:08 ` Thomas Pedersen
2012-10-24 23:33 ` Adrian Chadd
2012-10-25 1:54 ` Adrian Chadd
2012-10-25 2:13 ` Adrian Chadd
2012-10-25 20:42 ` Adrian Chadd
2012-10-25 22:25 ` Thomas Pedersen
2012-10-25 22:27 ` Adrian Chadd
2012-10-26 0:41 ` Thomas Pedersen
2012-10-26 0:42 ` Adrian Chadd
2012-10-24 22:04 ` Thomas Pedersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=509173F4.7070502@mailservices.uwaterloo.ca \
--to=a2abedi@uwaterloo.ca \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox