From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oleksij Rempel Date: Fri, 17 May 2013 10:31:28 +0200 Subject: [ath9k-devel] ath9k_htc: Target is unresponsive In-Reply-To: <20130517081507.GA9673@zenon.in.qult.net> References: <20130515134258.GA9033@zenon.in.qult.net> <5194DEB3.2060407@rempel-privat.de> <20130516172030.GD21850@zenon.in.qult.net> <51951B90.70909@rempel-privat.de> <20130516185030.GB16833@zenon.in.qult.net> <20130516234857.GA17867@zenon.in.qult.net> <20130516234526.GH3795@alittletooquiet.net> <20130517060042.GA21663@sig21.net> <5195E524.8000508@rempel-privat.de> <20130517081507.GA9673@zenon.in.qult.net> Message-ID: <5195EAE0.7040403@rempel-privat.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Am 17.05.2013 10:15, schrieb Ignacy Gawedzki: > On Fri, May 17, 2013 at 10:07:00AM +0200, thus spake Oleksij Rempel: >> OK, now i was able to reproduce it on ar9271. > > Ah, good, but what did you do wrong previously then? Nothing. I needed to start single user mode first, and reboot the system to et this error. > >> In attachment is the log i grubbed form adapter. >> Lines starting with ######### are my comments > > At least we can already diagnose a problem with A_PRINTF. :/ > > Do these logs speak to anyone? > Here are some explanations: "ASIC-ROM_1.8" - is start of boot loader on device. It should go immediately after adapter got power. "8. download" - at this stage bootloader is ready to receive firmware. "[Tgt running" - firmware was downloaded and running. "!USB suspend" - means usb suspend was initiated And that is probably our problem. -- Regards, Oleksij