From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oleksij Rempel Date: Fri, 17 May 2013 14:00:25 +0200 Subject: [ath9k-devel] ath9k_htc: Target is unresponsive In-Reply-To: <20130517114135.GA16784@zenon.in.qult.net> References: <20130516234526.GH3795@alittletooquiet.net> <20130517060042.GA21663@sig21.net> <5195E524.8000508@rempel-privat.de> <20130517081507.GA9673@zenon.in.qult.net> <5195EAE0.7040403@rempel-privat.de> <20130517103034.GA13060@zenon.in.qult.net> <20130517104047.GA14150@zenon.in.qult.net> <51960B15.8030001@rempel-privat.de> <20130517112243.GA15539@zenon.in.qult.net> <20130517114135.GA16784@zenon.in.qult.net> Message-ID: <51961BD9.6050300@rempel-privat.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Am 17.05.2013 13:41, schrieb Ignacy Gawedzki: > On Fri, May 17, 2013 at 01:22:43PM +0200, thus spake Ignacy Gawedzki: >> On Fri, May 17, 2013 at 12:48:53PM +0200, thus spake Oleksij Rempel: >>> Here an example of soldered pins, it is ar7010 device. I attached >>> here jtag pins. >>> https://plus.google.com/u/0/102032716864870215256/posts/hZoEq8bo3zk >> >> Wow, my soldering iron has too broad a tip for that precision work. :/ >> >>> here is a workaround for this issue, please test it: >>> https://github.com/olerem/open-ath9k-htc-firmware/commits/suspend >> >> It seems to work just right on the PC. I'll test on the RPi and let you know. > > Works on the RPi as well! Are there any implications for this being a > workaround and not a proper fix? Yes, i do not know what i did. I will need to find out, what it actually should do. -- Regards, Oleksij