From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oleksij Rempel Date: Tue, 08 Jul 2014 09:35:42 +0200 Subject: [ath9k-devel] AR9280 AP mode - 5GHz band In-Reply-To: References: Message-ID: <53BB9F4E.9010505@rempel-privat.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Am 08.07.2014 08:20, schrieb Hosam Hittini: > Hello there, > > I have this dual band wireless > adapter https://www.thinkpenguin.com/gnu-linux/penguin-wireless-n-dual-band-usb-adapter-gnu-linux-tpe-nusbdb > and it uses AR9280 chipset for the 5GHz communication > It?s using ath9k driver; I have Ubuntu 13.10 running 3.11 kernel and the > adapter worked out of the box > I?m using hostapd to configure the adapter as a software AP > When I tried to configure the adapter as an AP on the 2.4GHz channels it > worked fine > When tried the 5GHz channels it gives me the following error >> channel [1] (40) is disabled for use in AP mode, flags: 0x77 >> wlan1: IEEE 802.11 Configured channel (40) not found from the channel >> list of current mode (2) IEEE 802.11a >> wlan1: IEEE 802.11 Hardware does not support configured channel > In addition, _/*iw list*/_ command shows that the 5GHz channels have the > ?passive scanning? and ?no IBSS? flags > I can associate with an AP on the 5GHz though > How to solve that > Thank you 5GHz AP is not supported on this HW. -- Regards, Oleksij -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 278 bytes Desc: OpenPGP digital signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140708/78ff725a/attachment.pgp