From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vittorio Gambaletta (VittGam) Date: Tue, 9 Feb 2016 15:44:20 +0100 Subject: [ath9k-devel] [PATCH RFC 1/2] ath9k: Add a module parameter to invert LED polarity. In-Reply-To: <1a755105206de97e2cddea669b43de51@vittgam.net> References: <1a755105206de97e2cddea669b43de51@vittgam.net> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org The LED can be active high instead of active low on some hardware. Signed-off-by: Vittorio Gambaletta --- drivers/net/wireless/ath/ath9k/init.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index ab7a1ac..b66a30e 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -49,6 +49,10 @@ int ath9k_led_blink; module_param_named(blink, ath9k_led_blink, int, 0444); MODULE_PARM_DESC(blink, "Enable LED blink on activity"); +static int ath9k_led_active_high = -1; +module_param_named(led_active_high, ath9k_led_active_high, int, 0444); +MODULE_PARM_DESC(led_active_high, "Invert LED polarity"); + static int ath9k_btcoex_enable; module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); @@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, if (ret) return ret; + if (ath9k_led_active_high != -1) + ah->config.led_active_high = ath9k_led_active_high == 1; + /* * Enable WLAN/BT RX Antenna diversity only when: *