* ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>
commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream.
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).
The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/pci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pc
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+
+#ifdef CONFIG_ATH9K_PCOEM
+ /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0029,
+ PCI_VENDOR_ID_ATHEROS,
+ 0x2096),
+ .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
Patches currently in stable-queue which might be from linux-wireless at vittgam.net are
queue-4.5/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.5/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
^ permalink raw reply [flat|nested] 5+ messages in thread* ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream.
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).
The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/net/wireless/ath/ath9k/pci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index f009b5b..b9ec8c7 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+
+#ifdef CONFIG_ATH9K_PCOEM
+ /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0029,
+ PCI_VENDOR_ID_ATHEROS,
+ 0x2096),
+ .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>
commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream.
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).
The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/pci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pc
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+
+#ifdef CONFIG_ATH9K_PCOEM
+ /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0029,
+ PCI_VENDOR_ID_ATHEROS,
+ 0x2096),
+ .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
Patches currently in stable-queue which might be from linux-wireless at vittgam.net are
queue-4.4/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.4/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
^ permalink raw reply [flat|nested] 5+ messages in thread* ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream.
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).
The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/net/wireless/ath/ath9k/pci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index e6fef1b..7cdaf40 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+
+#ifdef CONFIG_ATH9K_PCOEM
+ /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0029,
+ PCI_VENDOR_ID_ATHEROS,
+ 0x2096),
+ .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>
commit 0f9edcdd88a993914fa1d1dc369b35dc503979db upstream.
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity
(active high instead of active low).
The same PCI Subsystem ID is used by both cards, which are based on
the same Atheros MB92 design.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/pci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -28,6 +28,16 @@ static const struct pci_device_id ath_pc
{ PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */
{ PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */
{ PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */
+
+#ifdef CONFIG_ATH9K_PCOEM
+ /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
+ 0x0029,
+ PCI_VENDOR_ID_ATHEROS,
+ 0x2096),
+ .driver_data = ATH9K_PCI_LED_ACT_HI },
+#endif
+
{ PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
#ifdef CONFIG_ATH9K_PCOEM
Patches currently in stable-queue which might be from linux-wireless at vittgam.net are
queue-4.6/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.6/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-04-11 2:48 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-11 2:48 ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards Vittorio Gambaletta
-- strict thread matches above, loose matches on Subject: below --
2016-04-11 2:48 Vittorio Gambaletta
2016-04-11 2:48 Vittorio Gambaletta
2016-04-11 2:48 Vittorio Gambaletta
2016-04-11 2:48 Vittorio Gambaletta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).