From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Mon, 27 Feb 2012 05:00:48 -0000 Subject: No subject Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org ;f=3Dhostapd/hostapd.conf), I cannot find what wme_enabled is. =20 - What does wme_enabled do ? Is it needed in conjunction with = ht_capab ? Another question, I live in CH, a reboot shows=20 [ 9.201363] ath: Country alpha2 being used: AU And changed it to CH.=20 =20 - Which limitation can I expect, for not being a European Card, = as it propagates AU ? =20 Below I added lspci, iw list, hostapd.conf, dmesg output. http://www.tp-link.com/en/products/details/?model=3DTL-WDN4800#spec =20 Thanks for your help Angela =20 # lspci -vvd 168c: 02:00.0 Network controller: Atheros Communications Inc. AR9300 Wireless = LAN adaptor (rev 01) Subsystem: Atheros Communications Inc. Device 3112 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- = ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR-

Hello

 

I have a TP = Link WDN4800 (ar9380). A Windows 802.11n client showed 72Mb connection, = 150Mb should be possible. inSSIDer showed 195Mb. I want to have it = optimized for 2.4Ghz.

 

iw = list:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX LDCP

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = =A0=A0=A0=A0=A0=A0=A0=A0HT20/HT40

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 SM Power Save disabled

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX HT20 SGI

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX HT40 SGI

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 TX STBC

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX STBC 1-stream

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 Max AMSDU length: 7935 bytes

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 DSSS/CCK HT40

 

I = haven’t found a complete guide (http://l= inuxwireless.org/en/users/Documentation/hostapd) for the ht_capab = settings or some guidance to map them from iw list. Iw list shows HT20, = what should/can be used, HT20, or HT20- or HT20+, with or without HT40*. = Mapping to much seems also not to good.

 

-          = What are the most optimized settings for = ht_capab ?

 

From the guide and hostapd.conf (http://hostap.epitest.fi/gitweb/gitweb.= cgi?p=3Dhostap.git;a=3Dblob_plain;f=3Dhostapd/hostapd.conf), =A0I = cannot find what wme_enabled is.

 

-          = What does wme_enabled do ? Is it needed in = conjunction with ht_capab ?

=

Another question, I live in CH, a = reboot shows

[=A0=A0=A0 9.201363] = ath: Country alpha2 being used: AU

And changed it to CH.

 

-          = Which limitation can I expect, for not being a = European Card, as it propagates AU ?

 

Below I = added lspci, iw list, hostapd.conf, dmesg output.

http://www.tp-link.com/en/products/details/?model=3DTL-WDN4800#spec

 

Thanks for your help

Angela

 

# lspci -vvd = 168c:

02:00.0 Network controller: = Atheros Communications Inc. AR9300 Wireless LAN adaptor (rev = 01)

=A0=A0=A0=A0=A0=A0=A0 Subsystem: = Atheros Communications Inc. Device 3112

=A0=A0=A0=A0=A0=A0=A0 Control: I/O+ Mem+ BusMaster+ = SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- = DisINTx-

=A0=A0=A0=A0=A0=A0=A0 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast = >TAbort- <TAbort- <MAbort- >SERR- <PERR- = INTx-

=A0=A0=A0=A0=A0=A0=A0 Latency: 0, Cache Line Size: = 64 bytes

=A0=A0=A0=A0=A0=A0=A0 = Interrupt: pin A routed to IRQ 17

=A0=A0=A0=A0=A0=A0=A0 Region 0: Memory at fbe00000 = (64-bit, non-prefetchable) [size=3D128K]

=A0=A0=A0=A0=A0=A0=A0 Expansion ROM at fbe20000 = [disabled] [size=3D64K]

=A0=A0=A0=A0=A0=A0=A0 Capabilities: [40] Power = Management version 3

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Flags: = PMEClk- DSI- D1+ D2- AuxCurrent=3D375mA = PME(D0+,D1+,D2-,D3hot+,D3cold-)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Status: = D0 NoSoftRst- PME-Enable- DSel=3D0 DScale=3D0 PME-

=A0=A0=A0=A0=A0=A0=A0 Capabilities: [50] MSI: Enable- = Count=3D1/4 Maskable+ 64bit+

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Address: = 0000000000000000=A0 Data: 0000

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Masking: = 00000000=A0 Pending: 00000000

=A0=A0=A0=A0=A0=A0=A0 Capabilities: [70] Express (v2) = Endpoint, MSI 00

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevCap: = MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 = <8us

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ = FLReset-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = DevCtl: Report errors: Correctable- Non-Fatal- Fatal- = Unsupported-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RlxdOrd- ExtTag- PhantFunc- AuxPwr- = NoSnoop-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 MaxPayload 128 bytes, MaxReadReq 512 bytes

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevSta: = CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- = TransPend-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkCap: = Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 = <64us

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 ClockPM- Surprise- LLActRep- BwNot-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkCtl: = ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 ExtSynch- ClockPM- AutWidDis- BWInt- = AutBWInt-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkSta: = Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- = ABWMgmt-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevCap2: = Completion Timeout: Not Supported, TimeoutDis+

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 DevCtl2: = Completion Timeout: 50us to 50ms, TimeoutDis-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkCtl2: = Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable = De-emphasis: -6dB

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0 Transmit Margin: Normal Operating Range, = EnterModifiedCompliance- ComplianceSOS-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0 Compliance De-emphasis: -6dB

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 LnkSta2: = Current De-emphasis Level: -6dB

=A0=A0=A0=A0=A0=A0=A0 Capabilities: [100 v1] Advanced = Error Reporting

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = UESta:=A0 DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- = MalfTLP- ECRC- UnsupReq- ACSViol-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = =A0=A0UEMsk:=A0 DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- = MalfTLP- ECRC- UnsupReq- ACSViol-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 UESvrt: = DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- = UnsupReq- ACSViol-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = CESta:=A0 RxErr- BadTLP- BadDLLP- Rollover- Timeout- = NonFatalErr-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = CEMsk:=A0 RxErr- BadTLP- BadDLLP- Rollover- Timeout- = NonFatalErr+

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 AERCap: = First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

=A0=A0=A0=A0=A0=A0=A0 Capabilities: [140 v1] Virtual = Channel

=A0=A0=A0=A0=A0=A0=A0=A0 = =A0=A0=A0=A0=A0=A0=A0Caps:=A0=A0 LPEVC=3D0 RefClk=3D100ns = PATEntryBits=3D1

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Arb:=A0=A0=A0 Fixed- WRR32- WRR64- WRR128-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Ctrl:=A0=A0 ArbSelect=3DFixed

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Status: = InProgress-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = VC0:=A0=A0=A0 Caps:=A0=A0 PATOffset=3D00 MaxTimeSlots=3D1 = RejSnoopTrans-

= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0Arb:= =A0=A0=A0 Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 Ctrl:=A0=A0 Enable+ ID=3D0 ArbSelect=3DFixed = TC/VC=3D01

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 Status: NegoPending- InProgress-

=A0=A0=A0=A0=A0=A0=A0 Capabilities: [300 v1] Device = Serial Number 00-00-00-00-00-00-00-00

=A0=A0=A0=A0=A0=A0=A0 Kernel driver in use: = ath9k

=A0=A0=A0=A0=A0=A0=A0 Kernel = modules: ath9k

 

 

# iw = list

Wiphy phy0

=A0=A0=A0=A0=A0=A0=A0 Band 1:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Capabilities: 0x11ef

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX LDCP

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 HT20/HT40

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 SM Power Save disabled

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX HT20 SGI

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX HT40 SGI

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 TX STBC

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX STBC 1-stream

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 Max AMSDU length: 7935 bytes

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 DSSS/CCK HT40

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Maximum = RX AMPDU length 65535 bytes (exponent: 0x003)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Minimum = RX AMPDU time spacing: 8 usec (0x06)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 HT TX/RX = MCS rate indexes supported: 0-23

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Frequencies:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2412 MHz [1] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2417 MHz [2] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2422 MHz [3] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2427 MHz [4] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2432 MHz [5] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2437 MHz [6] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2442 MHz [7] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2447 MHz [8] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2452 MHz [9] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2457 MHz [10] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2462 MHz [11] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2467 MHz [12] (20.0 dBm)

=A0=A0 = =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0* 2472 = MHz [13] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2484 MHz [14] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Bitrates = (non-HT):

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 1.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 2.0 Mbps (short preamble supported)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5.5 Mbps (short preamble supported)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 11.0 Mbps (short preamble supported)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 6.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 9.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 12.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 18.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 24.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 36.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 48.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 54.0 Mbps

=A0=A0=A0=A0=A0=A0=A0 Band 2:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Capabilities: 0x11ef

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX LDCP

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = =A0=A0=A0=A0=A0=A0=A0=A0HT20/HT40

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 SM Power Save disabled

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX HT20 SGI

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0 RX HT40 SGI

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0 TX STBC

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 RX STBC 1-stream

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 Max AMSDU length: 7935 bytes

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 DSSS/CCK HT40

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Maximum = RX AMPDU length 65535 bytes (exponent: 0x003)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Minimum = RX AMPDU time spacing: 8 usec (0x06)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 HT TX/RX = MCS rate indexes supported: 0-23

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = Frequencies:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5180 MHz [36] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5200 MHz [40] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5220 MHz [44] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5240 MHz [48] (20.0 dBm)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5260 MHz [52] (20.0 dBm) (passive scanning, no IBSS, = radar detection)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5280 MHz [56] (20.0 dBm) (passive scanning, no IBSS, = radar detection)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5300 MHz [60] (20.0 dBm) (passive scanning, no IBSS, = radar detection)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5320 MHz [64] (20.0 dBm) (passive scanning, no IBSS, = radar detection)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5500 MHz [100] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5520 MHz [104] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5540 MHz [108] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5560 MHz [112] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5580 MHz [116] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5600 MHz [120] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5620 MHz [124] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0* 5640 MHz [128] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5660 MHz [132] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5680 MHz [136] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5700 MHz [140] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5745 MHz [149] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = =A0=A0=A0=A0=A0=A0=A0=A0* 5765 MHz [153] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5785 MHz [157] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5805 MHz [161] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 5825 MHz [165] (disabled)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Bitrates = (non-HT):

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 6.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 9.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 12.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 18.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 24.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 36.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 48.0 Mbps

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 * 54.0 Mbps

=A0=A0=A0=A0=A0=A0=A0 max # scan SSIDs: = 4

=A0=A0=A0=A0=A0=A0=A0 Supported = interface modes:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = IBSS

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = managed

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = AP

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = AP/VLAN

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = WDS

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = monitor

=A0=A0=A0=A0=A0=A0 = =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0* mesh point

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown mode (8)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown mode (9)

=A0=A0=A0=A0=A0=A0=A0 Supported = commands:

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = new_interface

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = set_interface

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = new_key

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = new_beacon

=A0=A0=A0=A0=A0=A0=A0=A0=A0 =A0=A0=A0=A0=A0=A0=A0* = new_station

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = new_mpath

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = set_mesh_params

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = set_bss

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = authenticate

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = associate

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = deauthenticate

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = disassociate

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = join_ibss

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (68)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (55)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (57)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (59)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (67)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = set_wiphy_netns

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (65)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (66)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (82)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (81)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (84)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = Unknown command (87)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 =A0* = Unknown command (85)

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = testmode

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = connect

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 * = disconnect

 

 

# cat /etc/hostapd.conf

# Schnittstelle und = Treiber

interface=3Dwlan0

driver=3Dnl80211

 

# = WLAN-Konfiguration

ssid=3Dxxxx

channel=3D6

 

# ESSID = sichtbar

ignore_broadcast_ssid=3D0

 

# L=E4ndereinstellungen

country_code=3DCH

ieee80211d=3D1

 

# = =DCbertragungsmodus

hw_mode=3Dg

# Optionale Einstellungen

# supported_rates=3D10 20 55 110 60 = 90 120 180 240 360 480 540

 

# Draft-N Modus aktivieren / = optional nur f=FCr entsprechende Karten

# ieee80211n=3D1

ieee80211n=3D1

 

# = Beacons

beacon_int=3D100

dtim_period=3D2

 

# = MAC-Authentifizierung

macaddr_acl=3D0

 

# max. Anzahl der = Clients

max_num_sta=3D255

 

# Gr=F6=DFe der = Datenpakete/Begrenzung

rts_threshold=3D2347

fragm_threshold=3D2346

 

# hostapd Log = Einstellungen

logger_syslog=3D-1

logger_syslog_level=3D2

logger_stdout=3D-1

logger_stdout_level=3D2

 

# = tempor=E4re Konfigurationsdateien

dump_file=3D/tmp/hostapd.dump

ctrl_interface=3D/var/run/hostapd

ctrl_interface_group=3D0

 

# Authentifizierungsoptionen

auth_algs=3D1

 

# = wmm-Funktionalit=E4t

wmm_enabled=3D0

 

# Verschl=FCsselung / hier rein = WPA2

macaddr_acl=3D0

wpa=3D2

rsn_preauth=3D1

rsn_preauth_interfaces=3Dwlan0

wpa_key_mgmt=3DWPA-PSK

wpa_pairwise=3DTKIP

rsn_pairwise=3DCCMP

 

# = Schl=FCsselintervalle / Standardkonfiguration

wpa_group_rekey=3D600

wpa_ptk_rekey=3D600

wpa_gmk_rekey=3D86400

 

# Zugangsschl=FCssel (PSK) / hier = in Klartext (ASCII)

wpa_passphrase=3Dxxxx

 

 

[=A0=A0=A0 = 0.000000] Linux version 3.3.0-rc2-1+ (root at linux) (gcc version 4.6.1 = (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Tue Feb 14 13:17:34 CET = 2012

[=A0=A0=A0 0.000000] Command = line: BOOT_IMAGE=3D/vmlinuz-3.3.0-rc2-1+ = root=3DUUID=3Dcfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro

[=A0=A0=A0 9.201360] ath: EEPROM regdomain: = 0x21

[=A0=A0=A0 9.201362] ath: EEPROM = indicates we should expect a direct regpair map

[=A0=A0=A0 9.201363] ath: Country alpha2 being used: = AU

[=A0=A0=A0 9.201364] ath: Regpair = used: 0x21

[=A0=A0=A0 9.531824] = ieee80211 phy0: Selected rate control algorithm = 'ath9k_rate_control'

[=A0=A0=A0 = 9.532132] Registered led device: ath9k-phy0

[=A0=A0=A0 7.594696] cfg80211: Calling CRDA to update = world regulatory domain

[=A0=A0=A0 = 8.966680] cfg80211: World regulatory domain updated:

[=A0=A0=A0 8.966682] cfg80211:=A0=A0 (start_freq - = end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[=A0=A0=A0 8.966684] cfg80211:=A0=A0 (2402000 KHz - = 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 8.966686] cfg80211:=A0=A0 (2457000 KHz - = 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 8.966687] cfg80211:=A0=A0 (2474000 KHz - = 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 8.966688] cfg80211:=A0=A0 (5170000 KHz - = 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 8.966689] cfg80211:=A0=A0 (5735000 KHz - = 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.201366] cfg80211: Updating information on = frequency 2412 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201368] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.201369] cfg80211: = Updating information on frequency 2417 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.201370] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.201371] = cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201373] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.201374] cfg80211: Updating information on = frequency 2427 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201375] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.201376] cfg80211: = Updating information on frequency 2432 MHz for a 20 MHz width channel = with regulatory rule:

[=A0 = =A0=A09.201378] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A = mBi, 2000 mBm)

[=A0=A0=A0 9.201379] = cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201380] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.201381] cfg80211: Updating information on = frequency 2442 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201383] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.201384] cfg80211: = Updating information on frequency 2447 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.201385] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.201386] = cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201388] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.201389] cfg80211: Updating information on = frequency 2457 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201390] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.201391] cfg80211: = Updating information on frequency 2462 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.201393] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.201394] = cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a = 20 MHz wide channel

[=A0=A0=A0 = 9.201395] cfg80211: Disabling freq 2472 MHz as custom regd has no rule = that fits a 20 MHz wide channel

[=A0=A0=A0 9.201396] cfg80211: Disabling freq 2484 MHz = as custom regd has no rule that fits a 20 MHz wide = channel

[=A0=A0=A0 9.201398] = cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201399] cfg80211: 5140000 KHz - 5360000 = KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[=A0=A0=A0 9.201400] cfg80211: Updating information on = frequency 5200 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201402] cfg80211: = 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 = mBm)

[=A0=A0=A0 9.201403] cfg80211: = Updating information on frequency 5220 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.201404] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, = 3000 mBm)

[=A0=A0=A0 9.201405] = cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201407] cfg80211: 5140000 KHz - 5360000 = KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[=A0=A0=A0 9.201408] cfg80211: Updating information on = frequency 5260 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201409] cfg80211: = 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 = mBm)

[=A0=A0=A0 9.201410] cfg80211: = Updating information on frequency 5280 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.201412] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, = 3000 mBm)

[=A0=A0=A0 9.201413] = cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201414] cfg80211: 5140000 KHz - 5360000 = KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[=A0=A0=A0 9.201415] cfg80211: Updating information on = frequency 5320 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201417] cfg80211: = 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 = mBm)

[=A0=A0=A0 9.201418] cfg80211: = Disabling freq 5500 MHz as custom regd has no rule that fits a 20 MHz = wide channel

[=A0=A0=A0 9.201419] = cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits a = 20 MHz wide channel

[=A0=A0=A0 = 9.201420] cfg80211: Disabling freq 5540 MHz as custom regd has no rule = that fits a 20 MHz wide channel

[=A0=A0=A0 9.201422] cfg80211: Disabling freq 5560 MHz = as custom regd has no rule that fits a 20 MHz wide = channel

[=A0=A0=A0 9.201423] = cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits a = 20 MHz wide channel

[=A0=A0=A0 = 9.201424] cfg80211: Disabling freq 5600 MHz as custom regd has no rule = that fits a 20 MHz wide channel

[=A0=A0=A0 9.201425] cfg80211: Disabling freq 5620 MHz = as custom regd has no rule that fits a 20 MHz wide = channel

[=A0=A0=A0 9.201426] = cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits a = 20 MHz wide channel

[=A0=A0=A0 = 9.201428] cfg80211: Disabling freq 5660 MHz as custom regd has no rule = that fits a 20 MHz wide channel

[=A0=A0=A0 9.201429] cfg80211: Disabling freq 5680 MHz = as custom regd has no rule that fits a 20 MHz wide = channel

[=A0=A0=A0 9.201430] = cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits a = 20 MHz wide channel

[=A0=A0=A0 = 9.201431] cfg80211: Updating information on frequency 5745 MHz for a 20 = MHz width channel with regulatory rule:

[=A0=A0=A0 9.201433] cfg80211: 5715000 KHz - 5860000 = KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[=A0=A0=A0 9.201434] cfg80211: Updating information on = frequency 5765 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201435] cfg80211: = 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 = mBm)

[=A0=A0=A0 9.201436] cfg80211: = Updating information on frequency 5785 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.201438] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, = 3000 mBm)

[=A0=A0=A0 9.201439] = cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.201440] cfg80211: 5715000 KHz - 5860000 = KHz @ 40000 KHz), (N/A mBi, 3000 mBm)

[=A0=A0=A0 9.201441] cfg80211: Updating information on = frequency 5825 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.201443] cfg80211: = 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 = mBm)

[=A0=A0=A0 9.202827] cfg80211: = Updating information on frequency 2412 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202829] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202830] = cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202831] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202833] cfg80211: Updating information on = frequency 2422 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202834] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202845] cfg80211: = Updating information on frequency 2427 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202848] = cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202849] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202851] cfg80211: Updating information on = frequency 2437 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202852] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202853] cfg80211: = Updating information on frequency 2442 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202856] = cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202857] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202859] cfg80211: Updating information on = frequency 2452 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202860] cfg80211: = 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202861] cfg80211: = Updating information on frequency 2457 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202864] = cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202865] cfg80211: 2402000 KHz - 2472000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202867] cfg80211: Updating information on = frequency 2467 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202868] cfg80211: = 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202869] cfg80211: = Updating information on frequency 2472 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202871] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202872] = cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202874] cfg80211: 2474000 KHz - 2494000 = KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202875] cfg80211: Updating information on = frequency 5180 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202877] cfg80211: = 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202878] cfg80211: = Updating information on frequency 5200 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202879] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202881] = cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202882] cfg80211: 5170000 KHz - 5250000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202884] cfg80211: Updating information on = frequency 5240 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202885] cfg80211: = 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202887] cfg80211: = Disabling freq 5260 MHz

[=A0=A0=A0 = 9.202897] cfg80211: Disabling freq 5280 MHz

[=A0=A0=A0 9.202898] cfg80211: Disabling freq 5300 = MHz

[=A0=A0=A0 9.202899] cfg80211: = Disabling freq 5320 MHz

[=A0=A0=A0 = 9.202900] cfg80211: Disabling freq 5500 MHz

[=A0=A0=A0 9.202901] cfg80211: Disabling freq 5520 = MHz

[=A0=A0=A0 9.202901] cfg80211: = Disabling freq 5540 MHz

[=A0=A0=A0 = 9.202902] cfg80211: Disabling freq 5560 MHz

[=A0=A0=A0 9.202903] cfg80211: Disabling freq 5580 = MHz

[=A0=A0=A0 9.202904] cfg80211: = Disabling freq 5600 MHz

[=A0=A0=A0 = 9.202905] cfg80211: Disabling freq 5620 MHz

[=A0=A0=A0 9.202905] cfg80211: Disabling freq 5640 = MHz

[=A0=A0=A0 9.202916] cfg80211: = Disabling freq 5660 MHz

[=A0=A0=A0 = 9.202917] cfg80211: Disabling freq 5680 MHz

[=A0=A0=A0 9.202918] cfg80211: Disabling freq 5700 = MHz

[=A0=A0=A0 9.202919] cfg80211: = Updating information on frequency 5745 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202920] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202921] = cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202923] cfg80211: 5735000 KHz - 5835000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.202924] cfg80211: Updating information on = frequency 5785 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.202925] cfg80211: = 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 = mBm)

[=A0=A0=A0 9.202926] cfg80211: = Updating information on frequency 5805 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.202928] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, = 2000 mBm)

[=A0=A0=A0 9.202929] = cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.202930] cfg80211: 5735000 KHz - 5835000 = KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[=A0=A0=A0 9.532113] cfg80211: Calling CRDA for = country: AU

[=A0=A0=A0 9.533522] = cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533524] cfg80211: 2402000 KHz - 2482000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.533525] cfg80211: Updating information on = frequency 2417 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533527] cfg80211: = 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.533528] cfg80211: = Updating information on frequency 2422 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533530] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.533531] = cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533533] cfg80211: 2402000 KHz - 2482000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.533534] cfg80211: Updating information on = frequency 2432 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533535] cfg80211: = 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.533537] cfg80211: = Updating information on frequency 2437 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533538] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.533539] = cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533541] cfg80211: 2402000 KHz - 2482000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.533542] cfg80211: Updating information on = frequency 2447 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533544] cfg80211: = 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.533545] cfg80211: = Updating information on frequency 2452 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533546] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.533547] = cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533549] cfg80211: 2402000 KHz - 2482000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.533550] cfg80211: Updating information on = frequency 2462 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533552] cfg80211: = 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 = mBm)

[=A0=A0=A0 9.533553] cfg80211: = Updating information on frequency 2467 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533554] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, = 2000 mBm)

[=A0=A0=A0 9.533556] = cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533557] cfg80211: 2402000 KHz - 2482000 = KHz @ 40000 KHz), (N/A mBi, 2000 mBm)

[=A0=A0=A0 9.533558] cfg80211: Disabling freq 2484 = MHz

[=A0=A0=A0 9.533559] cfg80211: = Updating information on frequency 5180 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533561] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, = 2300 mBm)

[=A0=A0=A0 9.533562] = cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533564] cfg80211: 5170000 KHz - 5250000 = KHz @ 40000 KHz), (300 mBi, 2300 mBm)

[=A0=A0=A0 9.533565] cfg80211: Updating information on = frequency 5220 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533566] cfg80211: = 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 = mBm)

[=A0=A0=A0 9.533568] cfg80211: = Updating information on frequency 5240 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533569] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, = 2300 mBm)

[=A0=A0=A0 9.533570] = cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533572] cfg80211: 5250000 KHz - 5330000 = KHz @ 40000 KHz), (300 mBi, 2300 mBm)

[=A0=A0=A0 9.533573] cfg80211: Updating information on = frequency 5280 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533575] cfg80211: = 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 = mBm)

[=A0=A0=A0 9.533576] cfg80211: = Updating information on frequency 5300 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533577] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, = 2300 mBm)

[=A0=A0=A0 9.533579] = cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533580] cfg80211: 5250000 KHz - 5330000 = KHz @ 40000 KHz), (300 mBi, 2300 mBm)

[ =A0=A0=A09.533581] cfg80211: Disabling freq 5500 = MHz

[=A0=A0=A0 9.533582] cfg80211: = Disabling freq 5520 MHz

[=A0=A0=A0 = 9.533583] cfg80211: Disabling freq 5540 MHz

[=A0=A0=A0 9.533584] cfg80211: Disabling freq 5560 = MHz

[=A0=A0=A0 9.533585] cfg80211: = Disabling freq 5580 MHz

[=A0=A0=A0 = 9.533585] cfg80211: Disabling freq 5600 MHz

[=A0=A0=A0 9.533586] cfg80211: Disabling freq 5620 = MHz

[=A0=A0=A0 9.533587] cfg80211: = Disabling freq 5640 MHz

[=A0=A0=A0 = 9.533588] cfg80211: Disabling freq 5660 MHz

[=A0=A0=A0 9.533589] cfg80211: Disabling freq 5680 = MHz

[=A0=A0=A0 9.533590] cfg80211: = Disabling freq 5700 MHz

[=A0=A0=A0 = 9.533591] cfg80211: Updating information on frequency 5745 MHz for a 20 = MHz width channel with regulatory rule:

[=A0=A0=A0 9.533592] cfg80211: 5735000 KHz - 5835000 = KHz @ 40000 KHz), (300 mBi, 3000 mBm)

[=A0=A0=A0 9.533593] cfg80211: Updating information on = frequency 5765 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533595] cfg80211: = 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 = mBm)

[=A0=A0=A0 9.533596] cfg80211: = Updating information on frequency 5785 MHz for a 20 MHz width channel = with regulatory rule:

[=A0=A0=A0 = 9.533597] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, = 3000 mBm)

[=A0=A0=A0 9.533599] = cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width = channel with regulatory rule:

[=A0=A0=A0 9.533600] cfg80211: 5735000 KHz - 5835000 = KHz @ 40000 KHz), (300 mBi, 3000 mBm)

[=A0=A0=A0 9.533601] cfg80211: Updating information on = frequency 5825 MHz for a 20 MHz width channel with regulatory = rule:

[=A0=A0=A0 9.533603] cfg80211: = 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 = mBm)

[=A0=A0=A0 9.533606] cfg80211: = Regulatory domain changed to country: AU

[=A0=A0=A0 9.533607] cfg80211:=A0=A0 (start_freq - = end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[=A0=A0=A0 9.533608] cfg80211:=A0=A0 (2402000 KHz - = 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[=A0=A0=A0 9.533609] cfg80211:=A0=A0 (5170000 KHz - = 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)

[=A0=A0=A0 9.533611] cfg80211:=A0=A0 (5250000 KHz - = 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)

[=A0=A0=A0 9.533612] cfg80211:=A0=A0 (5735000 KHz - = 5835000 KHz @ 40000 KHz), (300 mBi, 3000 = mBm)

------=_NextPart_000_0CFF_01CD01BB.A7359070--