From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Sun, 04 Jan 2009 17:33:01 -0000 Subject: No subject Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org ---------------------------------------------------------------------------= ------------------------ Reason Meaning 0 Reserved 1 Unspecified reason 2 Previous authentication no longer valid 3 Deauthenticated because sending STA is leaving (or has left) IBSS or ESS 4 Disassociated due to inactivity 5 Disassociated because AP is unable to handle all currently associated STA= s 6 Class 2 frame received from nonauthenticated STA 7 Class 3 frame received from nonassociated STA 8 Disassociated because sending STA is leaving (or has left) BSS 9 STA requesting (re)association is not authenticated with responding STA 10 Disassociated because the information in the Power Capability element is= unacceptable 11 Disassociated because the information in the Supported Channels element = is unacceptable 12 Reserved 13 Invalid information element, i.e., an information element defined in thi= s standard for which the content does not meet the specifications in Clause 7 14 Message integrity code (MIC) failure 15 4-Way Handshake timeout 16 Group Key Handshake timeout 17 Information element in 4-Way Handshake different from (Re)Association Re= quest/Probe Response/Beacon frame 18 Invalid group cipher 19 Invalid pairwise cipher 20 Invalid AKMP 21 Unsupported RSN information element version 22 Invalid RSN information element capabilities 23 IEEE 802.1X authentication failed 24 Cipher suite rejected because of the security policy 25=E2=80=9331 Reserved 32 Disassociated for unspecified, QoS-related reason 33 Disassociated because QoS AP lacks sufficient bandwidth for this QoS STA 34 Disassociated because excessive number of frames need to be acknowledged= , but are not acknowledged due to AP transmissions and/or poor channel conditions 35 Disassociated because STA is transmitting outside the limits of its TXOP= s 36 Requested from peer STA as the STA is leaving the BSS (or resetting) 37 Requested from peer STA as it does not want to use the mechanism 38 Requested from peer STA as the STA received frames using the mechanism f= or which a setup is required 39 Requested from peer STA due to timeout 45 Peer STA does not support the requested cipher suite 46=E2=80=9365 Reserved 535 Reserved ---------------------------------------------------------------------------= ------------------------ > Jan 30 23:31:37 ws1 dhcpcd[23630]: wlan0: carrier lost > Jan 30 23:31:37 ws1 wpa_cli: interface wlan0 DISCONNECTED > Jan 30 23:31:38 ws1 [ 9444.502016] wlan0: associate with AP f51a5ea8 > Jan 30 23:31:38 ws1 dhcpcd[23630]: wlan0: received SIGTERM, stopping > Jan 30 23:31:38 ws1 [ 9444.703019] wlan0: associate with AP f51a5ea8 > Jan 30 23:31:38 ws1 [ 9444.902015] wlan0: associate with AP f51a5ea8 > Jan 30 23:31:39 ws1 [ 9445.102013] wlan0: association with AP f51a5ea8 ti= med out > Jan 30 23:31:40 ws1 [ 9445.990865] wlan0: authenticate with AP f51a5ea8 > Jan 30 23:31:40 ws1 [ 9445.998616] wlan0: authenticate with AP f51a5ea8 > Jan 30 23:31:40 ws1 [ 9446.000416] wlan0: authenticated > Jan 30 23:31:40 ws1 [ 9446.000421] wlan0: associate with AP f51a5ea8 > Jan 30 23:31:40 ws1 [ 9446.003209] wlan0: RX AssocResp from f029002a (cap= ab=3D0x411 status=3D0 aid=3D2) > Jan 30 23:31:40 ws1 [ 9446.003214] wlan0: associated > Jan 30 23:31:40 ws1 wpa_cli: interface wlan0 CONNECTED > Jan 30 23:31:41 ws1 dhcpcd[24556]: wlan0: dhcpcd 4.0.7 starting > Jan 30 23:31:41 ws1 dhcpcd[24556]: wlan0: broadcasting for a lease > Jan 30 23:31:42 ws1 dhcpcd[24556]: wlan0: offered 192.168.1.100 from 192.= 168.1.1 > Jan 30 23:31:42 ws1 dhcpcd[24556]: wlan0: checking 192.168.1.100 is avail= able on attached networks > Jan 30 23:31:47 ws1 dhcpcd[24556]: wlan0: acknowledged 192.168.1.100 from= 192.168.1.1 Yeap everything looks good except your AP doesn't seem to like you to be id= le for more than 8 minutes, that is if no traffic was going on in between your dhcp negotiation and your disassoc. > Used Hardware : > My Router: Linksys WRT 160v2 Standard: 80211N. maybe a broadcom Chip > My Wlan Card: Linksys WMP 300N v2 Standard: 80211N. AR5416 Chip >=20 > But at all it works. Today i have set the router that he only uses the 80= 211N Standard and it works with my Wireless Card. I don't see any issues above. Please see: http://wireless.kernel.org/en/users/Documentation/Reporting_bugs > !!!!!!!!!!!!!!Big Thanks for your great drivers and packages!!!!!!!!!!!!!= ! >=20 > Well night >=20 > kind regards >=20 > Alexander Bartha Luis