From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Thu, 07 Apr 2011 05:55:38 -0000 Subject: No subject Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org -------------------------------
Device Instance Id:
PCI\VEN_168C&DEV_0030&SUBSYS_3116168C&REV_01\4&492937F&a= mp;0&00E2

Hardware Ids:
PCI\VEN_168C&DEV_0030&SUBSYS_3116168C&REV_01
PCI\VEN_168C&DEV_0030&SUBSYS_3116168C
PCI\VEN_168C&DEV_0030&CC_028000
PCI\VEN_168C&DEV_0030&CC_0280

Compatible Ids:
PCI\VEN_168C&DEV_0030&REV_01
PCI\VEN_168C&DEV_0030
PCI\VEN_168C&CC_028000
PCI\VEN_168C&CC_0280
PCI\VEN_168C
PCI\CC_028000
PCI\CC_0280

Matching Device Id:
pci\ven_168c&dev_0030&subsys_3116168c


Here is the interesting bit, when I first hooked this card I booted my= machine in Ubuntu I saw the same 168c:ABCD. After using it under Window= s, I booted in to Linux today and found that it is reporting the expecte= d IDs. Now ath9k works right out of the box, no Vendor ID hacking requir= ed. I am using it as station right now. The other card is in a different= machine. I will try to swap the cards to verify my theory. I am thinkin= g the Windows driver applied a firmware update to the card. Or, the othe= r card skipped quality checks and has bogus EEPROM data. Any thoughts?
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300= Wireless LAN adaptor [168c:0030] (rev 01)

lspci -vvvnn returns

0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300= Wireless LAN adaptor [168c:0030] (rev 01)
        Subsystem: Atheros Communicat= ions Inc. Device [168c:3116]
        Control: I/O+ Mem+ BusMaster+= SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-=
        Status: Cap+ 66MHz- UDF- Fast= B2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbort- <MAbort- >SERR-= <PERR- INTx-
        Latency: 0, Cache Line Size:= 64 bytes
        Interrupt: pin A routed to= IRQ 18
        Region 0: Memory at fa000000= (64-bit, non-prefetchable) [size=3D128K]
        [virtual] Expansion ROM at= f2000000 [disabled] [size=3D64K]
        Capabilities: <access deni= ed>
        Kernel driver in use: ath9k         Kernel modules: ath9k


Hasan R.

-----Original Message-----
From: Mohammed Shafi [mailto:sh= afi.ath9k at gmail.com]
Sent: Tuesday, April 12, 2011 7:47 AM
To: Hasan Rashid
Cc: ath9k-devel at lists.ath9k.org
Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd

On Mon, Apr 11, 2011 at 11:24 PM, Hasan Rashid <hrashad at avionica.com&= gt; wrote:
>
> I have attached the driver load output in dmesg.
>
> By the way why does AR9382 require Kernel 2.6.36 or higher? Can you=
> list the major requirements?

because the hardware code(HAL) will be present from that kernel version= only.
>
> Hasan R.
>
> -----Original Message-----
> From: ath9k-devel-bounces at lists.ath9k.org
> [mailto:ath9= k-devel-bounces at lists.ath9k.org] On Behalf Of Peter Stuge
> Sent: Monday, April 11, 2011 12:20 PM
> To: ath9k-devel at lists.ath9k.org
> Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd
>
> Mohammed Shafi wrote:
>> to make sure that HT is configured in driver please do this
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/hw.c
>> b/drivers/net/wireless/ath/ath9k/hw.c
>> index 1b5bd13..720a866 100644
>> --- a/drivers/net/wireless/ath/ath9k/hw.c
>> +++ b/drivers/net/wireless/ath/ath9k/hw.c
>> @@ -1855,6 +1855,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw= *ah)
>> =A0 =A0 =A0 =A0 else
>> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap->hw_caps &=3D ~ATH9= K_HW_CAP_HT;
>>
>> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap->hw_caps |=3D ATH9K_HW_CA= P_HT;
>> +
>
> The indentation is off, or do you mean to include the added line= only
> within the else block? If so, remember to add braces.
>
>
> //Peter
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> ht= tps://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
> This communication contains information that may be confidential= or
> privileged. The information is solely intended for the use of the= addressee. If you are not the intended recipient, be advised that any= disclosure, copy, distribution, or use of the contents of this communic= ation is prohibited. If you have received this communication in error,= please immediately notify the sender by telephone or by electronic mail= .
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> ht= tps://lists.ath9k.org/mailman/listinfo/ath9k-devel
>
>

This communication contains information that may be confidential or priv= ileged. The information is solely intended for the use of the addressee.= If you are not the intended recipient, be advised that any disclosure,= copy, distribution, or use of the contents of this communication is pro= hibited. If you have received this communication in
error, please imm= ediately notify the sender by telephone or by electronic mail. ------_=_NextPart_001_01CBF922.E6EB9838--