No subject

[<bogus@does.not.exist.com>]

-------------------------------<br>
Device Instance Id:<br>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C&amp;REV_01\4&amp;492937F&amp;=
0&amp;00E2<br>
<br>
Hardware Ids:<br>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C&amp;REV_01<br>
PCI\VEN_168C&amp;DEV_0030&amp;SUBSYS_3116168C<br>
PCI\VEN_168C&amp;DEV_0030&amp;CC_028000<br>
PCI\VEN_168C&amp;DEV_0030&amp;CC_0280<br>
<br>
Compatible Ids:<br>
PCI\VEN_168C&amp;DEV_0030&amp;REV_01<br>
PCI\VEN_168C&amp;DEV_0030<br>
PCI\VEN_168C&amp;CC_028000<br>
PCI\VEN_168C&amp;CC_0280<br>
PCI\VEN_168C<br>
PCI\CC_028000<br>
PCI\CC_0280<br>
<br>
Matching Device Id:<br>
pci\ven_168c&amp;dev_0030&amp;subsys_3116168c<br>
<br>
<br>
Here is the interesting bit, when I first hooked this card I booted my mach=
ine in Ubuntu I saw the same 168c:ABCD. After using it under Windows, I boo=
ted in to Linux today and found that it is reporting the expected IDs. Now =
ath9k works right out of the box, no Vendor ID hacking required. I am using=
 it as station right now. The other card is in a different machine. I will =
try to swap the cards to verify my theory. I am thinking the Windows driver=
 applied a firmware update to the card. Or, the other card skipped quality =
checks and has bogus EEPROM data. Any thoughts?<br>

<br>
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 Wirel=
ess LAN adaptor [168c:0030] (rev 01)<br>
<br>
lspci -vvvnn returns<br>
<br>
0e:00.0 Network controller [0280]: Atheros Communications Inc. AR9300 Wirel=
ess LAN adaptor [168c:0030] (rev 01)<br>
=A0=A0=A0=A0=A0=A0=A0 Subsystem: Atheros Communications Inc. Device [168c:3=
116]</font></p><div class=3D"im"><font size=3D"2"><br>
=A0=A0=A0=A0=A0=A0=A0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGA=
Snoop- ParErr- Stepping- SERR- FastB2B- DisINTx-<br>
=A0=A0=A0=A0=A0=A0=A0 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfa=
st &gt;TAbort- &lt;TAbort- &lt;MAbort- &gt;SERR- &lt;PERR- INTx-<br></font>=
</div><font size=3D"2">
=A0=A0=A0=A0=A0=A0=A0 Latency: 0, Cache Line Size: 64 bytes<br>
=A0=A0=A0=A0=A0=A0=A0 Interrupt: pin A routed to IRQ 18<br>
=A0=A0=A0=A0=A0=A0=A0 Region 0: Memory at fa000000 (64-bit, non-prefetchabl=
e) [size=3D128K]<br>
=A0=A0=A0=A0=A0=A0=A0 [virtual] Expansion ROM at f2000000 [disabled] [size=
=3D64K]<br>
=A0=A0=A0=A0=A0=A0=A0 Capabilities: &lt;access denied&gt;<br>
=A0=A0=A0=A0=A0=A0=A0 Kernel driver in use: ath9k<br>
=A0=A0=A0=A0=A0=A0=A0 Kernel modules: ath9k<br>
<br>
<br>
Hasan R.<div class=3D"im"><br>
<br>
-----Original Message-----<br>
From: Mohammed Shafi [<a href=3D"mailto:shafi.ath9k@gmail.com" target=3D"_b=
lank">mailto:shafi.ath9k at gmail.com</a>]<br></div><div class=3D"im">
Sent: Tuesday, April 12, 2011 7:47 AM<br>
To: Hasan Rashid<br></div><div><div></div><div class=3D"h5">
Cc: <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k-=
devel at lists.ath9k.org</a><br>
Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd<br>
<br>
On Mon, Apr 11, 2011 at 11:24 PM, Hasan Rashid &lt;<a href=3D"mailto:hrasha=
d@avionica.com" target=3D"_blank">hrashad at avionica.com</a>&gt; wrote:<br>
&gt;<br>
&gt; I have attached the driver load output in dmesg.<br>
&gt;<br>
&gt; By the way why does AR9382 require Kernel 2.6.36 or higher? Can you<br=
>
&gt; list the major requirements?<br>
<br>
because the hardware code(HAL) will be present from that kernel version onl=
y.<br>
&gt;<br>
&gt; Hasan R.<br>
&gt;<br>
&gt; -----Original Message-----<br>
&gt; From: <a href=3D"mailto:ath9k-devel-bounces@lists.ath9k.org" target=3D=
"_blank">ath9k-devel-bounces at lists.ath9k.org</a><br>
&gt; [<a href=3D"mailto:ath9k-devel-bounces@lists.ath9k.org" target=3D"_bla=
nk">mailto:ath9k-devel-bounces at lists.ath9k.org</a>] On Behalf Of Peter Stug=
e<br>
&gt; Sent: Monday, April 11, 2011 12:20 PM<br>
&gt; To: <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">a=
th9k-devel at lists.ath9k.org</a><br>
&gt; Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd<br>
&gt;<br>
&gt; Mohammed Shafi wrote:<br>
&gt;&gt; to make sure that HT is configured in driver please do this<br>
&gt;&gt;<br>
&gt;&gt; diff --git a/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; b/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; index 1b5bd13..720a866 100644<br>
&gt;&gt; --- a/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; +++ b/drivers/net/wireless/ath/ath9k/hw.c<br>
&gt;&gt; @@ -1855,6 +1855,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah=
)<br>
&gt;&gt; =A0 =A0 =A0 =A0 else<br>
&gt;&gt; =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap-&gt;hw_caps &amp;=3D ~ATH9K_H=
W_CAP_HT;<br>
&gt;&gt;<br>
&gt;&gt; + =A0 =A0 =A0 =A0 =A0 =A0 =A0 pCap-&gt;hw_caps |=3D ATH9K_HW_CAP_H=
T;<br>
&gt;&gt; +<br>
&gt;<br>
&gt; The indentation is off, or do you mean to include the added line only<=
br>
&gt; within the else block? If so, remember to add braces.<br>
&gt;<br>
&gt;<br>
&gt; //Peter<br>
&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k=
-devel at lists.ath9k.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
&gt; This communication contains information that may be confidential or<br=
>
&gt; privileged. The information is solely intended for the use of the addr=
essee. If you are not the intended recipient, be advised that any disclosur=
e, copy, distribution, or use of the contents of this communication is proh=
ibited. If you have received this communication in error, please immediatel=
y notify the sender by telephone or by electronic mail.<br>

&gt; _______________________________________________<br>
&gt; ath9k-devel mailing list<br>
&gt; <a href=3D"mailto:ath9k-devel@lists.ath9k.org" target=3D"_blank">ath9k=
-devel at lists.ath9k.org</a><br>
&gt; <a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" targe=
t=3D"_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
&gt;<br>
&gt;<br>
<br>
</div></div></font>
<p></p><div><div></div><div class=3D"h5">



This communication contains information that may be confidential or privile=
ged. The information is solely intended for the use of the addressee. If yo=
u are not the intended recipient, be advised that any disclosure, copy, dis=
tribution, or use of the contents of this communication is prohibited. If y=
ou have received this communication in<br>
error, please immediately notify the sender by telephone or by electronic m=
ail.
</div></div></div>
<br>_______________________________________________<br>
ath9k-devel mailing list<br>
<a href=3D"mailto:ath9k-devel@lists.ath9k.org">ath9k-devel at lists.ath9k.org<=
/a><br>
<a href=3D"https://lists.ath9k.org/mailman/listinfo/ath9k-devel" target=3D"=
_blank">https://lists.ath9k.org/mailman/listinfo/ath9k-devel</a><br>
<br></blockquote></div><br>

--002215b031060bfd5704a0c0a00c--