* ath9k: Add a module parameter to invert LED polarity.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>
commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.
The LED can be active high instead of active low on some hardware.
Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.
Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
Patches currently in stable-queue which might be from linux-wireless at vittgam.net are
queue-4.5/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.5/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
^ permalink raw reply [flat|nested] 5+ messages in thread
* ath9k: Add a module parameter to invert LED polarity.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>
commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.
The LED can be active high instead of active low on some hardware.
Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.
Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
Patches currently in stable-queue which might be from linux-wireless at vittgam.net are
queue-4.4/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.4/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
^ permalink raw reply [flat|nested] 5+ messages in thread
* ath9k: Add a module parameter to invert LED polarity.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
From: Vittorio Gambaletta (VittGam) <linux-wireless@vittgam.net>
commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.
The LED can be active high instead of active low on some hardware.
Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.
Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
Patches currently in stable-queue which might be from linux-wireless at vittgam.net are
queue-4.6/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.6/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch
^ permalink raw reply [flat|nested] 5+ messages in thread
* ath9k: Add a module parameter to invert LED polarity.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.
The LED can be active high instead of active low on some hardware.
Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.
Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index fc6dc52..6a571d8 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* ath9k: Add a module parameter to invert LED polarity.
@ 2016-04-11 2:48 Vittorio Gambaletta
0 siblings, 0 replies; 5+ messages in thread
From: Vittorio Gambaletta @ 2016-04-11 2:48 UTC (permalink / raw)
To: ath9k-devel
commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.
The LED can be active high instead of active low on some hardware.
Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.
Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.
Cc: <linux-wireless@vger.kernel.org>
Cc: <ath9k-devel@qca.qualcomm.com>
Cc: <ath9k-devel@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index a218a00..d7c1a02 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int led_blink;
module_param_named(blink, led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -582,6 +586,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-04-11 2:48 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-11 2:48 ath9k: Add a module parameter to invert LED polarity Vittorio Gambaletta
-- strict thread matches above, loose matches on Subject: below --
2016-04-11 2:48 Vittorio Gambaletta
2016-04-11 2:48 Vittorio Gambaletta
2016-04-11 2:48 Vittorio Gambaletta
2016-04-11 2:48 Vittorio Gambaletta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).