[PATCH v2] b43: Replace mdelay with usleep_range in b43_radio_2057_init_post

[Larry Finger <Larry.Finger@lwfinger.net>]

On 01/08/2018 07:40 PM, Jia-Ju Bai wrote:
> b43_radio_2057_init_post is not called in an interrupt handler
> nor holding a spinlock.
> The function mdelay in it can be replaced with usleep_range,
> to reduce busy wait.
> 
> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
> ---
> v2:
> * Replace mdelay with usleep_range, instead of msleep in v1.
>    Thank Larry for good advice.
> ---

I agree that a sleep of 2-3 ms should be OK here.

Acked-by: Larry Finger <Larry.Finger@lwfinger.net>

Larry

>   drivers/net/wireless/broadcom/b43/phy_n.c |    2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
> index a5557d7..f2a2f41 100644
> --- a/drivers/net/wireless/broadcom/b43/phy_n.c
> +++ b/drivers/net/wireless/broadcom/b43/phy_n.c
> @@ -1031,7 +1031,7 @@ static void b43_radio_2057_init_post(struct b43_wldev *dev)
>   
>   	b43_radio_set(dev, R2057_RFPLL_MISC_CAL_RESETN, 0x78);
>   	b43_radio_set(dev, R2057_XTAL_CONFIG2, 0x80);
> -	mdelay(2);
> +	usleep_range(2000, 3000);
>   	b43_radio_mask(dev, R2057_RFPLL_MISC_CAL_RESETN, ~0x78);
>   	b43_radio_mask(dev, R2057_XTAL_CONFIG2, ~0x80);
>   
>