From mboxrd@z Thu Jan 1 00:00:00 1970 From: ikorot at earthlink.net Date: Tue, 7 Dec 2010 17:55:33 -0800 (GMT-08:00) Subject: [PATCH 1/4] b43: N-PHY: update init tables Message-ID: <1127342.1291773334294.JavaMail.root@elwamui-rubis.atl.sa.earthlink.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Larry Finger Cc: Hauke Mehrtens , linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org Larry, -----Original Message----- >From: Larry Finger >Sent: Dec 7, 2010 12:00 PM >To: ikorot at earthlink.net >Cc: Hauke Mehrtens , linux-wireless at vger.kernel.org, b43-dev at lists.infradead.org >Subject: Re: [PATCH 1/4] b43: N-PHY: update init tables > >On 12/07/2010 01:49 PM, ikorot at earthlink.net wrote: >>> One reason is that these tables changed from non-zero to zero values between >>> Broadcom driver 4.174.64.19 and 5.10.56.46. As they might change again, I think >>> we should retain the full version. >> >> Is there a way to check for version of the driver? >> This way whoever uses old one won't be screwed... > >That will not be a problem as no older version of b43 works at all with b43. To >help you understand this change, when the 4.174.64.19 Broadcom driver was >reverse-engineered, the tables had non-zero values. Rafel later compared the >trace dumps of b43 with the latest version of wl and found that the values are >now zero. When I rechecked driver 5.10.56.46, I found them to be zero there as >well and changed the specs. Well, it maybe feasible to keep the old values and check the version of the driver, since you are saying yourself that the value might be changing in the future. Maybe for couple of releases only? Thank you. > >Larry