[PATCH 4/4] b43: N-PHY: Implement RX core state setting for rev.2 and earlier PHYs

["Gábor Stefanik" <netrolller.3d@gmail.com>]

Rev.3+ support coming in a later patch.

Signed-off-by: G?bor Stefanik <netrolller.3d@gmail.com>
---
 drivers/net/wireless/b43/phy_n.c |   40 +++++++++++++++++++++++++++++++++++++-
 1 files changed, 39 insertions(+), 1 deletions(-)

diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index d2dab55..92cf8b8 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -3085,6 +3085,44 @@ static void b43_nphy_mac_phy_clock_set(struct b43_wldev *dev, bool on)
 	ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCoreSetState */
+static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = phy->n;
+	u16 buf[16];
+
+	if (0 /* FIXME clk */)
+		return;
+
+	b43_mac_suspend(dev);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, true);
+
+	b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXEN,
+			(mask & 0x3) << B43_NPHY_RFSEQCA_RXEN_SHIFT);
+
+	if (maskbits & 0x3 != 0x3) {
+		b43_phy_write(dev, B43_NPHY_HPANT_SWTHRES, 1);
+		if (dev->phy.rev >= 3) {
+			/* TODO */
+		}
+	} else {
+		b43_phy_write(dev, B43_NPHY_HPANT_SWTHRES, 0x1E);
+		if (dev->phy.rev >= 3) {
+			/* TODO */
+		}
+	}
+
+	b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, false);
+
+	b43_mac_enable(dev);
+}
+
 /*
  * Init N-PHY
  * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
@@ -3211,7 +3249,7 @@ int b43_phy_initn(struct b43_wldev *dev)
 	}
 
 	if (nphy->phyrxchain != 3)
-		;/* TODO N PHY RX Core Set State with phyrxchain as argument */
+		b43_nphy_set_rx_core_state(dev, nphy->phyrxchain);
 	if (nphy->mphase_cal_phase_id > 0)
 		;/* TODO PHY Periodic Calibration Multi-Phase Restart */
 
-- 
1.6.4.2