From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 1/3] b43: N-PHY: define channel table struct for rev3+ devices
Date: Thu, 14 Oct 2010 23:01:02 +0200 [thread overview]
Message-ID: <1287090064-14607-1-git-send-email-zajec5@gmail.com> (raw)
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/radio_2056.c | 51 +++++++++++++++++++++++++++++++++
drivers/net/wireless/b43/radio_2056.h | 40 ++++++++++++++++++++++++--
2 files changed, 88 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/b43/radio_2056.c b/drivers/net/wireless/b43/radio_2056.c
index d856319..f710c01 100644
--- a/drivers/net/wireless/b43/radio_2056.c
+++ b/drivers/net/wireless/b43/radio_2056.c
@@ -24,9 +24,60 @@
#include "radio_2056.h"
#include "phy_common.h"
+#define RADIOREGS3(r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \
+ r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, \
+ r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, \
+ r30, r31, r32, r33, r34, r35, r36) \
+ .radio_syn_pll_vcocal1 = r00, \
+ .radio_syn_pll_vcocal2 = r01, \
+ .radio_syn_pll_refdiv = r02, \
+ .radio_syn_pll_mmd2 = r03, \
+ .radio_syn_pll_mmd1 = r04, \
+ .radio_syn_pll_loopfilter1 = r05, \
+ .radio_syn_pll_loopfilter2 = r06, \
+ .radio_syn_pll_loopfilter3 = r07, \
+ .radio_syn_pll_loopfilter4 = r08, \
+ .radio_syn_pll_loopfilter5 = r09, \
+ .radio_syn_reserved_addr27 = r10, \
+ .radio_syn_reserved_addr28 = r11, \
+ .radio_syn_reserved_addr29 = r12, \
+ .radio_syn_logen_vcobuf1 = r13, \
+ .radio_syn_logen_mixer2 = r14, \
+ .radio_syn_logen_buf3 = r15, \
+ .radio_syn_logen_buf4 = r16, \
+ .radio_rx0_lnaa_tune = r17, \
+ .radio_rx0_lnag_tune = r18, \
+ .radio_tx0_intpaa_boost_tune = r19, \
+ .radio_tx0_intpag_boost_tune = r20, \
+ .radio_tx0_pada_boost_tune = r21, \
+ .radio_tx0_padg_boost_tune = r22, \
+ .radio_tx0_pgaa_boost_tune = r23, \
+ .radio_tx0_pgag_boost_tune = r24, \
+ .radio_tx0_mixa_boost_tune = r25, \
+ .radio_tx0_mixg_boost_tune = r26, \
+ .radio_rx1_lnaa_tune = r27, \
+ .radio_rx1_lnag_tune = r28, \
+ .radio_tx1_intpaa_boost_tune = r29, \
+ .radio_tx1_intpag_boost_tune = r30, \
+ .radio_tx1_pada_boost_tune = r31, \
+ .radio_tx1_padg_boost_tune = r32, \
+ .radio_tx1_pgaa_boost_tune = r33, \
+ .radio_tx1_pgag_boost_tune = r34, \
+ .radio_tx1_mixa_boost_tune = r35, \
+ .radio_tx1_mixg_boost_tune = r36
+
+#define PHYREGS(r0, r1, r2, r3, r4, r5) \
+ .phy_regs.phy_bw1a = r0, \
+ .phy_regs.phy_bw2 = r1, \
+ .phy_regs.phy_bw3 = r2, \
+ .phy_regs.phy_bw4 = r3, \
+ .phy_regs.phy_bw5 = r4, \
+ .phy_regs.phy_bw6 = r5
+
static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev3[] = {
};
+/* TODO: add support for rev4+ devices by searching in rev4+ tables */
const struct b43_nphy_channeltab_entry_rev3 *
b43_nphy_get_chantabent_rev3(struct b43_wldev *dev, u16 freq)
{
diff --git a/drivers/net/wireless/b43/radio_2056.h b/drivers/net/wireless/b43/radio_2056.h
index fda6daf..60341d7 100644
--- a/drivers/net/wireless/b43/radio_2056.h
+++ b/drivers/net/wireless/b43/radio_2056.h
@@ -29,12 +29,46 @@
#include "tables_nphy.h"
struct b43_nphy_channeltab_entry_rev3 {
- /* The channel number */
- u8 channel;
/* The channel frequency in MHz */
u16 freq;
/* Radio register values on channelswitch */
- /* TODO */
+ u8 radio_syn_pll_vcocal1;
+ u8 radio_syn_pll_vcocal2;
+ u8 radio_syn_pll_refdiv;
+ u8 radio_syn_pll_mmd2;
+ u8 radio_syn_pll_mmd1;
+ u8 radio_syn_pll_loopfilter1;
+ u8 radio_syn_pll_loopfilter2;
+ u8 radio_syn_pll_loopfilter3;
+ u8 radio_syn_pll_loopfilter4;
+ u8 radio_syn_pll_loopfilter5;
+ u8 radio_syn_reserved_addr27;
+ u8 radio_syn_reserved_addr28;
+ u8 radio_syn_reserved_addr29;
+ u8 radio_syn_logen_vcobuf1;
+ u8 radio_syn_logen_mixer2;
+ u8 radio_syn_logen_buf3;
+ u8 radio_syn_logen_buf4;
+ u8 radio_rx0_lnaa_tune;
+ u8 radio_rx0_lnag_tune;
+ u8 radio_tx0_intpaa_boost_tune;
+ u8 radio_tx0_intpag_boost_tune;
+ u8 radio_tx0_pada_boost_tune;
+ u8 radio_tx0_padg_boost_tune;
+ u8 radio_tx0_pgaa_boost_tune;
+ u8 radio_tx0_pgag_boost_tune;
+ u8 radio_tx0_mixa_boost_tune;
+ u8 radio_tx0_mixg_boost_tune;
+ u8 radio_rx1_lnaa_tune;
+ u8 radio_rx1_lnag_tune;
+ u8 radio_tx1_intpaa_boost_tune;
+ u8 radio_tx1_intpag_boost_tune;
+ u8 radio_tx1_pada_boost_tune;
+ u8 radio_tx1_padg_boost_tune;
+ u8 radio_tx1_pgaa_boost_tune;
+ u8 radio_tx1_pgag_boost_tune;
+ u8 radio_tx1_mixa_boost_tune;
+ u8 radio_tx1_mixg_boost_tune;
/* PHY register values on channelswitch */
struct b43_phy_n_sfo_cfg phy_regs;
};
--
1.7.1
next reply other threads:[~2010-10-14 21:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-14 21:01 Rafał Miłecki [this message]
2010-10-14 21:01 ` [PATCH 2/3] b43: N-PHY: define registers names for 2056 radio Rafał Miłecki
2010-10-14 21:23 ` Luis R. Rodriguez
2010-10-15 11:01 ` Rafał Miłecki
2010-10-14 23:58 ` Gábor Stefanik
2010-10-15 11:02 ` Rafał Miłecki
2010-10-15 14:15 ` Gábor Stefanik
2010-10-15 14:19 ` Gábor Stefanik
2010-10-15 14:29 ` Rafał Miłecki
2010-10-14 22:39 ` [PATCH 1/3] b43: N-PHY: define channel table struct for rev3+ devices Gábor Stefanik
2010-10-15 10:58 ` Rafał Miłecki
2010-10-15 14:13 ` Gábor Stefanik
2010-10-15 14:27 ` Rafał Miłecki
2010-10-15 14:53 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287090064-14607-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).