From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sat, 23 Jul 2011 11:10:11 +0200 Subject: [PATCH 1/2] ssb: define boardflags In-Reply-To: <1311412213-3825-1-git-send-email-zajec5@gmail.com> References: <1311412213-3825-1-git-send-email-zajec5@gmail.com> Message-ID: <1311412213-3825-2-git-send-email-zajec5@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-wireless@vger.kernel.org, "John W. Linville" Cc: b43-dev@lists.infradead.org, =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= They are SPROM specific, so all should be defined in ssb code. Signed-off-by: Rafa? Mi?ecki --- include/linux/ssb/ssb_regs.h | 40 ++++++++++++++++++++++++++++++++++++++++ 1 files changed, 40 insertions(+), 0 deletions(-) diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index efbf459..9894120 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -462,6 +462,46 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ +#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ +#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ +#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ +#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ +#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ +#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ +#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ +#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ +#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ +#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ +#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ + +/* Values for boardflags_hi read from SPROM */ +#define SSB_BFH_NOPA 0x0001 /* has no PA */ +#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ +#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ +#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ +#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ +#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ +#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ + +/* Values for boardflags2_lo read from SPROM */ +#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ +#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ +#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ +#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ +#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ +#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ +#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ +#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ +#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, -- 1.7.3.4