From: Hauke Mehrtens <hauke@hauke-m.de>
To: linville@tuxdriver.com
Cc: zajec5@gmail.com, b43-dev@lists.infradead.org,
linux-mips@linux-mips.org, linux-wireless@vger.kernel.org,
arend@broadcom.com, m@bues.ch, ralf@linux-mips.org,
Hauke Mehrtens <hauke@hauke-m.de>
Subject: [PATCH v2 05/11] ssb: add some missing sprom attributes
Date: Tue, 28 Feb 2012 00:56:08 +0100 [thread overview]
Message-ID: <1330386974-4056-6-git-send-email-hauke@hauke-m.de> (raw)
In-Reply-To: <1330386974-4056-1-git-send-email-hauke@hauke-m.de>
This patch extends the sprom struct to contain all sprom attributes
found in sprom version 1 to 9. This was done accordingly to the open
source part of the Broadcom SDK.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
include/linux/ssb/ssb.h | 76 ++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 75 insertions(+), 1 deletions(-)
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index d658de4..d276831 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -32,6 +32,8 @@ struct ssb_sprom {
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
u16 board_rev; /* Board revision number from SPROM. */
+ u16 board_num; /* Board number from SPROM. */
+ u16 board_type; /* Board type from SPROM. */
u8 country_code; /* Country Code */
char alpha2[2]; /* Country Code as two chars like EU or US */
u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */
@@ -107,7 +109,79 @@ struct ssb_sprom {
} ghz5;
} fem;
- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ u16 mcs2gpo[8];
+ u16 mcs5gpo[8];
+ u16 mcs5glpo[8];
+ u16 mcs5ghpo[8];
+ u8 opo;
+
+ u8 rxgainerr2ga[3];
+ u8 rxgainerr5gla[3];
+ u8 rxgainerr5gma[3];
+ u8 rxgainerr5gha[3];
+ u8 rxgainerr5gua[3];
+
+ u8 noiselvl2ga[3];
+ u8 noiselvl5gla[3];
+ u8 noiselvl5gma[3];
+ u8 noiselvl5gha[3];
+ u8 noiselvl5gua[3];
+
+ u8 regrev;
+ u8 txchain;
+ u8 rxchain;
+ u8 antswitch;
+ u16 cddpo;
+ u16 stbcpo;
+ u16 bw40po;
+ u16 bwduppo;
+
+ u8 tempthresh;
+ u8 tempoffset;
+ u16 rawtempsense;
+ u8 measpower;
+ u8 tempsense_slope;
+ u8 tempcorrx;
+ u8 tempsense_option;
+ u8 freqoffset_corr;
+ u8 iqcal_swp_dis;
+ u8 hw_iqcal_en;
+ u8 elna2g;
+ u8 elna5g;
+ u8 phycal_tempdelta;
+ u8 temps_period;
+ u8 temps_hysteresis;
+ u8 measpower1;
+ u8 measpower2;
+ u8 pcieingress_war;
+
+ /* power per rate from sromrev 9 */
+ u16 cckbw202gpo;
+ u16 cckbw20ul2gpo;
+ u32 legofdmbw202gpo;
+ u32 legofdmbw20ul2gpo;
+ u32 legofdmbw205glpo;
+ u32 legofdmbw20ul5glpo;
+ u32 legofdmbw205gmpo;
+ u32 legofdmbw20ul5gmpo;
+ u32 legofdmbw205ghpo;
+ u32 legofdmbw20ul5ghpo;
+ u32 mcsbw202gpo;
+ u32 mcsbw20ul2gpo;
+ u32 mcsbw402gpo;
+ u32 mcsbw205glpo;
+ u32 mcsbw20ul5glpo;
+ u32 mcsbw405glpo;
+ u32 mcsbw205gmpo;
+ u32 mcsbw20ul5gmpo;
+ u32 mcsbw405gmpo;
+ u32 mcsbw205ghpo;
+ u32 mcsbw20ul5ghpo;
+ u32 mcsbw405ghpo;
+ u16 mcs32po;
+ u16 legofdm40duppo;
+ u8 sar2g;
+ u8 sar5g;
};
/* Information about the PCB the circuitry is soldered on. */
--
1.7.5.4
next prev parent reply other threads:[~2012-02-27 23:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-27 23:56 [PATCH v2 00/11] ssb/bcma/BCM47XX: sprom fixes and extensions Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 01/11] ssb: sprom fix some sizes / signedness Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 02/11] ssb: remove 5GHz antenna gain from sprom Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 03/11] ssb: fix per path sprom vars Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 04/11] ssb: add alpha2 Hauke Mehrtens
2012-02-27 23:56 ` Hauke Mehrtens [this message]
2012-02-27 23:56 ` [PATCH v2 06/11] bcma: export bcma_find_core Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 07/11] bcma: add support for sprom not found on the device Hauke Mehrtens
2012-03-06 13:27 ` Arend van Spriel
2012-02-27 23:56 ` [PATCH v2 08/11] MIPS: BCM47XX: return number of written bytes in nvram_getenv Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 09/11] MIPS: BCM47XX: fix signature of nvram_parse_macaddr Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 10/11] MIPS: BCM47XX: move and extend sprom parsing Hauke Mehrtens
2012-02-27 23:56 ` [PATCH v2 11/11] MIPS: BCM47XX: provide sprom to bcma bus Hauke Mehrtens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1330386974-4056-6-git-send-email-hauke@hauke-m.de \
--to=hauke@hauke-m.de \
--cc=arend@broadcom.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=m@bues.ch \
--cc=ralf@linux-mips.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).