* [PATCH 1/6] b43: use defines for board_type
@ 2013-03-30 23:46 Rafał Miłecki
2013-03-30 23:46 ` [PATCH 2/6] b43: N-PHY: define missing registers Rafał Miłecki
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Rafał Miłecki @ 2013-03-30 23:46 UTC (permalink / raw)
To: b43-dev
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_lp.c | 4 ++--
drivers/net/wireless/b43/phy_n.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 5ed352d..a316579 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -281,8 +281,8 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
} else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
- (dev->dev->board_type == 0x048A) || ((dev->phy.rev == 0) &&
- (sprom->boardflags_lo & B43_BFL_FEM))) {
+ dev->dev->board_type == SSB_BOARD_BU4312 ||
+ (dev->phy.rev == 0 && (sprom->boardflags_lo & B43_BFL_FEM))) {
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 9ec6e0c..efc3f9d 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1016,7 +1016,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
if (sprom->revision < 4)
workaround = (dev->dev->board_vendor != PCI_VENDOR_ID_BROADCOM
- && dev->dev->board_type == 0x46D
+ && dev->dev->board_type == SSB_BOARD_CB2_4321
&& dev->dev->board_rev >= 0x41);
else
workaround =
@@ -2616,7 +2616,7 @@ static void b43_nphy_workarounds_rev1_2(struct b43_wldev *dev)
u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
if (sprom->boardflags2_lo & B43_BFL2_SKWRKFEM_BRD ||
- dev->dev->board_type == 0x8B) {
+ dev->dev->board_type == BCMA_BOARD_TYPE_BCM943224M93) {
delays1[0] = 0x1;
delays1[5] = 0x14;
}
@@ -5006,7 +5006,7 @@ int b43_phy_initn(struct b43_wldev *dev)
if (sprom->boardflags2_lo & B43_BFL2_SKWRKFEM_BRD ||
(dev->dev->board_vendor == PCI_VENDOR_ID_APPLE &&
- dev->dev->board_type == 0x8B))
+ dev->dev->board_type == BCMA_BOARD_TYPE_BCM943224M93))
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0);
else
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/6] b43: N-PHY: define missing registers
2013-03-30 23:46 [PATCH 1/6] b43: use defines for board_type Rafał Miłecki
@ 2013-03-30 23:46 ` Rafał Miłecki
2013-03-30 23:46 ` [PATCH 3/6] b43: N-PHY: use enum for INTC override function argument Rafał Miłecki
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2013-03-30 23:46 UTC (permalink / raw)
To: b43-dev
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 74 ++++++++++---------
drivers/net/wireless/b43/phy_n.h | 146 ++++++++++++++++++++++++++++++++++++++
2 files changed, 182 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index efc3f9d..8f730c5 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1974,10 +1974,8 @@ static void b43_nphy_gain_ctl_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_set(dev, B43_NPHY_RXCTL, 0x0040);
/* Set Clip 2 detect */
- b43_phy_set(dev, B43_NPHY_C1_CGAINI,
- B43_NPHY_C1_CGAINI_CL2DETECT);
- b43_phy_set(dev, B43_NPHY_C2_CGAINI,
- B43_NPHY_C2_CGAINI_CL2DETECT);
+ b43_phy_set(dev, B43_NPHY_C1_CGAINI, B43_NPHY_C1_CGAINI_CL2DETECT);
+ b43_phy_set(dev, B43_NPHY_C2_CGAINI, B43_NPHY_C2_CGAINI_CL2DETECT);
b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAG1_IDAC,
0x17);
@@ -2011,22 +2009,22 @@ static void b43_nphy_gain_ctl_workarounds_rev3plus(struct b43_wldev *dev)
b43_ntab_write_bulk(dev, B43_NTAB8(2, 0x40), 6, lpf_bits);
b43_ntab_write_bulk(dev, B43_NTAB8(3, 0x40), 6, lpf_bits);
- b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
- b43_phy_write(dev, 0x2A7, e->init_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C1_INITGAIN_A, e->init_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C2_INITGAIN_A, e->init_gain);
+
b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x106), 2,
e->rfseq_init);
- /* TODO: check defines. Do not match variables names */
- b43_phy_write(dev, B43_NPHY_C1_CLIP1_MEDGAIN, e->cliphi_gain);
- b43_phy_write(dev, 0x2A9, e->cliphi_gain);
- b43_phy_write(dev, B43_NPHY_C1_CLIP2_GAIN, e->clipmd_gain);
- b43_phy_write(dev, 0x2AB, e->clipmd_gain);
- b43_phy_write(dev, B43_NPHY_C2_CLIP1_HIGAIN, e->cliplo_gain);
- b43_phy_write(dev, 0x2AD, e->cliplo_gain);
-
- b43_phy_maskset(dev, 0x27D, 0xFF00, e->crsmin);
- b43_phy_maskset(dev, 0x280, 0xFF00, e->crsminl);
- b43_phy_maskset(dev, 0x283, 0xFF00, e->crsminu);
+ b43_phy_write(dev, B43_NPHY_REV3_C1_CLIP_HIGAIN_A, e->cliphi_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C2_CLIP_HIGAIN_A, e->cliphi_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C1_CLIP_MEDGAIN_A, e->clipmd_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C2_CLIP_MEDGAIN_A, e->clipmd_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C1_CLIP_LOGAIN_A, e->cliplo_gain);
+ b43_phy_write(dev, B43_NPHY_REV3_C2_CLIP_LOGAIN_A, e->cliplo_gain);
+
+ b43_phy_maskset(dev, B43_NPHY_CRSMINPOWER0, 0xFF00, e->crsmin);
+ b43_phy_maskset(dev, B43_NPHY_CRSMINPOWERL0, 0xFF00, e->crsminl);
+ b43_phy_maskset(dev, B43_NPHY_CRSMINPOWERU0, 0xFF00, e->crsminu);
b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, e->nbclip);
b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, e->nbclip);
b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
@@ -2208,8 +2206,8 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_NPHY_FREQGAIN7, 0x80FF, 0x4000);
}
if (phy->rev <= 8) {
- b43_phy_write(dev, 0x23F, 0x1B0);
- b43_phy_write(dev, 0x240, 0x1B0);
+ b43_phy_write(dev, B43_NPHY_FORCEFRONT0, 0x1B0);
+ b43_phy_write(dev, B43_NPHY_FORCEFRONT1, 0x1B0);
}
if (phy->rev >= 8)
b43_phy_maskset(dev, B43_NPHY_TXTAILCNT, ~0xFF, 0x72);
@@ -2226,8 +2224,8 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
b43_nphy_set_rf_sequence(dev, 0, rx2tx_events_ipa,
rx2tx_delays_ipa, ARRAY_SIZE(rx2tx_events_ipa));
- b43_phy_maskset(dev, 0x299, 0x3FFF, 0x4000);
- b43_phy_maskset(dev, 0x29D, 0x3FFF, 0x4000);
+ b43_phy_maskset(dev, B43_NPHY_EPS_OVERRIDEI_0, 0x3FFF, 0x4000);
+ b43_phy_maskset(dev, B43_NPHY_EPS_OVERRIDEI_1, 0x3FFF, 0x4000);
lpf_20 = b43_nphy_read_lpf_ctl(dev, 0x154);
lpf_40 = b43_nphy_read_lpf_ctl(dev, 0x159);
@@ -2494,8 +2492,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
u16 tmp16;
u32 tmp32;
- b43_phy_write(dev, 0x23f, 0x1f8);
- b43_phy_write(dev, 0x240, 0x1f8);
+ b43_phy_write(dev, B43_NPHY_FORCEFRONT0, 0x1f8);
+ b43_phy_write(dev, B43_NPHY_FORCEFRONT1, 0x1f8);
tmp32 = b43_ntab_read(dev, B43_NTAB32(30, 0));
tmp32 &= 0xffffff;
@@ -2508,8 +2506,8 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0x00CD);
b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x0020);
- b43_phy_write(dev, B43_NPHY_C2_CLIP1_MEDGAIN, 0x000C);
- b43_phy_write(dev, 0x2AE, 0x000C);
+ b43_phy_write(dev, B43_NPHY_REV3_C1_CLIP_LOGAIN_B, 0x000C);
+ b43_phy_write(dev, B43_NPHY_REV3_C2_CLIP_LOGAIN_B, 0x000C);
/* TX to RX */
b43_nphy_set_rf_sequence(dev, 1, tx2rx_events, tx2rx_delays,
@@ -2534,7 +2532,7 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
0x2 : 0x9C40;
b43_phy_write(dev, B43_NPHY_ENDROP_TLEN, tmp16);
- b43_phy_maskset(dev, 0x294, 0xF0FF, 0x0700);
+ b43_phy_maskset(dev, B43_NPHY_SGILTRNOFFSET, 0xF0FF, 0x0700);
if (!dev->phy.is_40mhz) {
b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
@@ -2586,18 +2584,18 @@ static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
}
/* Dropped probably-always-true condition */
- b43_phy_write(dev, 0x224, 0x03eb);
- b43_phy_write(dev, 0x225, 0x03eb);
- b43_phy_write(dev, 0x226, 0x0341);
- b43_phy_write(dev, 0x227, 0x0341);
- b43_phy_write(dev, 0x228, 0x042b);
- b43_phy_write(dev, 0x229, 0x042b);
- b43_phy_write(dev, 0x22a, 0x0381);
- b43_phy_write(dev, 0x22b, 0x0381);
- b43_phy_write(dev, 0x22c, 0x042b);
- b43_phy_write(dev, 0x22d, 0x042b);
- b43_phy_write(dev, 0x22e, 0x0381);
- b43_phy_write(dev, 0x22f, 0x0381);
+ b43_phy_write(dev, B43_NPHY_ED_CRS40ASSERTTHRESH0, 0x03eb);
+ b43_phy_write(dev, B43_NPHY_ED_CRS40ASSERTTHRESH1, 0x03eb);
+ b43_phy_write(dev, B43_NPHY_ED_CRS40DEASSERTTHRESH1, 0x0341);
+ b43_phy_write(dev, B43_NPHY_ED_CRS40DEASSERTTHRESH1, 0x0341);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20LASSERTTHRESH0, 0x042b);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20LASSERTTHRESH1, 0x042b);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20LDEASSERTTHRESH0, 0x0381);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20LDEASSERTTHRESH1, 0x0381);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20UASSERTTHRESH0, 0x042b);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20UASSERTTHRESH1, 0x042b);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20UDEASSERTTHRESH0, 0x0381);
+ b43_phy_write(dev, B43_NPHY_ED_CRS20UDEASSERTTHRESH1, 0x0381);
if (dev->phy.rev >= 6 && sprom->boardflags2_lo & B43_BFL2_SINGLEANT_CCK)
; /* TODO: 0x0080000000000000 HF */
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 092c014..9a5b6bc 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -54,10 +54,15 @@
#define B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT 7
#define B43_NPHY_C1_INITGAIN_TRRX 0x1000 /* TR RX index */
#define B43_NPHY_C1_INITGAIN_TRTX 0x2000 /* TR TX index */
+#define B43_NPHY_REV3_C1_INITGAIN_A B43_PHY_N(0x020)
#define B43_NPHY_C1_CLIP1_HIGAIN B43_PHY_N(0x021) /* Core 1 clip1 high gain code */
+#define B43_NPHY_REV3_C1_INITGAIN_B B43_PHY_N(0x021)
#define B43_NPHY_C1_CLIP1_MEDGAIN B43_PHY_N(0x022) /* Core 1 clip1 medium gain code */
+#define B43_NPHY_REV3_C1_CLIP_HIGAIN_A B43_PHY_N(0x022)
#define B43_NPHY_C1_CLIP1_LOGAIN B43_PHY_N(0x023) /* Core 1 clip1 low gain code */
+#define B43_NPHY_REV3_C1_CLIP_HIGAIN_B B43_PHY_N(0x023)
#define B43_NPHY_C1_CLIP2_GAIN B43_PHY_N(0x024) /* Core 1 clip2 gain code */
+#define B43_NPHY_REV3_C1_CLIP_MEDGAIN_A B43_PHY_N(0x024)
#define B43_NPHY_C1_FILTERGAIN B43_PHY_N(0x025) /* Core 1 filter gain */
#define B43_NPHY_C1_LPF_QHPF_BW B43_PHY_N(0x026) /* Core 1 LPF Q HP F bandwidth */
#define B43_NPHY_C1_CLIPWBTHRES B43_PHY_N(0x027) /* Core 1 clip wideband threshold */
@@ -107,10 +112,15 @@
#define B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT 7
#define B43_NPHY_C2_INITGAIN_TRRX 0x1000 /* TR RX index */
#define B43_NPHY_C2_INITGAIN_TRTX 0x2000 /* TR TX index */
+#define B43_NPHY_REV3_C1_CLIP_MEDGAIN_B B43_PHY_N(0x036)
#define B43_NPHY_C2_CLIP1_HIGAIN B43_PHY_N(0x037) /* Core 2 clip1 high gain code */
+#define B43_NPHY_REV3_C1_CLIP_LOGAIN_A B43_PHY_N(0x037)
#define B43_NPHY_C2_CLIP1_MEDGAIN B43_PHY_N(0x038) /* Core 2 clip1 medium gain code */
+#define B43_NPHY_REV3_C1_CLIP_LOGAIN_B B43_PHY_N(0x038)
#define B43_NPHY_C2_CLIP1_LOGAIN B43_PHY_N(0x039) /* Core 2 clip1 low gain code */
+#define B43_NPHY_REV3_C1_CLIP2_GAIN_A B43_PHY_N(0x039)
#define B43_NPHY_C2_CLIP2_GAIN B43_PHY_N(0x03A) /* Core 2 clip2 gain code */
+#define B43_NPHY_REV3_C1_CLIP2_GAIN_B B43_PHY_N(0x03A)
#define B43_NPHY_C2_FILTERGAIN B43_PHY_N(0x03B) /* Core 2 filter gain */
#define B43_NPHY_C2_LPF_QHPF_BW B43_PHY_N(0x03C) /* Core 2 LPF Q HP F bandwidth */
#define B43_NPHY_C2_CLIPWBTHRES B43_PHY_N(0x03D) /* Core 2 clip wideband threshold */
@@ -706,10 +716,146 @@
#define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power control init */
#define B43_NPHY_TXPCTL_INIT_PIDXI1 0x00FF /* Power index init 1 */
#define B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT 0
+#define B43_NPHY_ED_CRSEN B43_PHY_N(0x223)
+#define B43_NPHY_ED_CRS40ASSERTTHRESH0 B43_PHY_N(0x224)
+#define B43_NPHY_ED_CRS40ASSERTTHRESH1 B43_PHY_N(0x225)
+#define B43_NPHY_ED_CRS40DEASSERTTHRESH0 B43_PHY_N(0x226)
+#define B43_NPHY_ED_CRS40DEASSERTTHRESH1 B43_PHY_N(0x227)
+#define B43_NPHY_ED_CRS20LASSERTTHRESH0 B43_PHY_N(0x228)
+#define B43_NPHY_ED_CRS20LASSERTTHRESH1 B43_PHY_N(0x229)
+#define B43_NPHY_ED_CRS20LDEASSERTTHRESH0 B43_PHY_N(0x22A)
+#define B43_NPHY_ED_CRS20LDEASSERTTHRESH1 B43_PHY_N(0x22B)
+#define B43_NPHY_ED_CRS20UASSERTTHRESH0 B43_PHY_N(0x22C)
+#define B43_NPHY_ED_CRS20UASSERTTHRESH1 B43_PHY_N(0x22D)
+#define B43_NPHY_ED_CRS20UDEASSERTTHRESH0 B43_PHY_N(0x22E)
+#define B43_NPHY_ED_CRS20UDEASSERTTHRESH1 B43_PHY_N(0x22F)
+#define B43_NPHY_ED_CRS B43_PHY_N(0x230)
+#define B43_NPHY_TIMEOUTEN B43_PHY_N(0x231)
+#define B43_NPHY_OFDMPAYDECODETIMEOUTLEN B43_PHY_N(0x232)
+#define B43_NPHY_CCKPAYDECODETIMEOUTLEN B43_PHY_N(0x233)
+#define B43_NPHY_NONPAYDECODETIMEOUTLEN B43_PHY_N(0x234)
+#define B43_NPHY_TIMEOUTSTATUS B43_PHY_N(0x235)
+#define B43_NPHY_RFCTRLCORE0GPIO0 B43_PHY_N(0x236)
+#define B43_NPHY_RFCTRLCORE0GPIO1 B43_PHY_N(0x237)
+#define B43_NPHY_RFCTRLCORE0GPIO2 B43_PHY_N(0x238)
+#define B43_NPHY_RFCTRLCORE0GPIO3 B43_PHY_N(0x239)
+#define B43_NPHY_RFCTRLCORE1GPIO0 B43_PHY_N(0x23A)
+#define B43_NPHY_RFCTRLCORE1GPIO1 B43_PHY_N(0x23B)
+#define B43_NPHY_RFCTRLCORE1GPIO2 B43_PHY_N(0x23C)
+#define B43_NPHY_RFCTRLCORE1GPIO3 B43_PHY_N(0x23D)
+#define B43_NPHY_BPHYTESTCONTROL B43_PHY_N(0x23E)
+/* REV3+ */
+#define B43_NPHY_FORCEFRONT0 B43_PHY_N(0x23F)
+#define B43_NPHY_FORCEFRONT1 B43_PHY_N(0x240)
+#define B43_NPHY_NORMVARHYSTTH B43_PHY_N(0x241)
+#define B43_NPHY_TXCCKERROR B43_PHY_N(0x242)
+#define B43_NPHY_AFESEQINITDACGAIN B43_PHY_N(0x243)
+#define B43_NPHY_TXANTSWLUT B43_PHY_N(0x244)
+#define B43_NPHY_CORECONFIG B43_PHY_N(0x245)
+#define B43_NPHY_ANTENNADIVDWELLTIME B43_PHY_N(0x246)
+#define B43_NPHY_ANTENNACCKDIVDWELLTIME B43_PHY_N(0x247)
+#define B43_NPHY_ANTENNADIVBACKOFFGAIN B43_PHY_N(0x248)
+#define B43_NPHY_ANTENNADIVMINGAIN B43_PHY_N(0x249)
+#define B43_NPHY_BRDSEL_NORMVARHYSTTH B43_PHY_N(0x24A)
+#define B43_NPHY_RXANTSWITCHCTRL B43_PHY_N(0x24B)
+#define B43_NPHY_ENERGYDROPTIMEOUTLEN2 B43_PHY_N(0x24C)
+#define B43_NPHY_ML_LOG_TXEVM0 B43_PHY_N(0x250)
+#define B43_NPHY_ML_LOG_TXEVM1 B43_PHY_N(0x251)
+#define B43_NPHY_ML_LOG_TXEVM2 B43_PHY_N(0x252)
+#define B43_NPHY_ML_LOG_TXEVM3 B43_PHY_N(0x253)
+#define B43_NPHY_ML_LOG_TXEVM4 B43_PHY_N(0x254)
+#define B43_NPHY_ML_LOG_TXEVM5 B43_PHY_N(0x255)
+#define B43_NPHY_ML_LOG_TXEVM6 B43_PHY_N(0x256)
+#define B43_NPHY_ML_LOG_TXEVM7 B43_PHY_N(0x257)
+#define B43_NPHY_ML_SCALE_TWEAK B43_PHY_N(0x258)
+#define B43_NPHY_MLUA B43_PHY_N(0x259)
+#define B43_NPHY_ZFUA B43_PHY_N(0x25A)
+#define B43_NPHY_CHANUPSYM01 B43_PHY_N(0x25B)
+#define B43_NPHY_CHANUPSYM2 B43_PHY_N(0x25C)
+#define B43_NPHY_RXSTRNFILT20NUM00 B43_PHY_N(0x25D)
+#define B43_NPHY_RXSTRNFILT20NUM01 B43_PHY_N(0x25E)
+#define B43_NPHY_RXSTRNFILT20NUM02 B43_PHY_N(0x25F)
+#define B43_NPHY_RXSTRNFILT20DEN00 B43_PHY_N(0x260)
+#define B43_NPHY_RXSTRNFILT20DEN01 B43_PHY_N(0x261)
+#define B43_NPHY_RXSTRNFILT20NUM10 B43_PHY_N(0x262)
+#define B43_NPHY_RXSTRNFILT20NUM11 B43_PHY_N(0x263)
+#define B43_NPHY_RXSTRNFILT20NUM12 B43_PHY_N(0x264)
+#define B43_NPHY_RXSTRNFILT20DEN10 B43_PHY_N(0x265)
+#define B43_NPHY_RXSTRNFILT20DEN11 B43_PHY_N(0x266)
+#define B43_NPHY_RXSTRNFILT40NUM00 B43_PHY_N(0x267)
+#define B43_NPHY_RXSTRNFILT40NUM01 B43_PHY_N(0x268)
+#define B43_NPHY_RXSTRNFILT40NUM02 B43_PHY_N(0x269)
+#define B43_NPHY_RXSTRNFILT40DEN00 B43_PHY_N(0x26A)
+#define B43_NPHY_RXSTRNFILT40DEN01 B43_PHY_N(0x26B)
+#define B43_NPHY_RXSTRNFILT40NUM10 B43_PHY_N(0x26C)
+#define B43_NPHY_RXSTRNFILT40NUM11 B43_PHY_N(0x26D)
+#define B43_NPHY_RXSTRNFILT40NUM12 B43_PHY_N(0x26E)
+#define B43_NPHY_RXSTRNFILT40DEN10 B43_PHY_N(0x26F)
+#define B43_NPHY_RXSTRNFILT40DEN11 B43_PHY_N(0x270)
+#define B43_NPHY_CRSHIGHPOWTHRESHOLD1 B43_PHY_N(0x271)
+#define B43_NPHY_CRSHIGHPOWTHRESHOLD2 B43_PHY_N(0x272)
+#define B43_NPHY_CRSHIGHLOWPOWTHRESHOLD B43_PHY_N(0x273)
+#define B43_NPHY_CRSHIGHPOWTHRESHOLD1L B43_PHY_N(0x274)
+#define B43_NPHY_CRSHIGHPOWTHRESHOLD2L B43_PHY_N(0x275)
+#define B43_NPHY_CRSHIGHLOWPOWTHRESHOLDL B43_PHY_N(0x276)
+#define B43_NPHY_CRSHIGHPOWTHRESHOLD1U B43_PHY_N(0x277)
+#define B43_NPHY_CRSHIGHPOWTHRESHOLD2U B43_PHY_N(0x278)
+#define B43_NPHY_CRSHIGHLOWPOWTHRESHOLDU B43_PHY_N(0x279)
+#define B43_NPHY_CRSACIDETECTTHRESH B43_PHY_N(0x27A)
+#define B43_NPHY_CRSACIDETECTTHRESHL B43_PHY_N(0x27B)
+#define B43_NPHY_CRSACIDETECTTHRESHU B43_PHY_N(0x27C)
+#define B43_NPHY_CRSMINPOWER0 B43_PHY_N(0x27D)
+#define B43_NPHY_CRSMINPOWER1 B43_PHY_N(0x27E)
+#define B43_NPHY_CRSMINPOWER2 B43_PHY_N(0x27F)
+#define B43_NPHY_CRSMINPOWERL0 B43_PHY_N(0x280)
+#define B43_NPHY_CRSMINPOWERL1 B43_PHY_N(0x281)
+#define B43_NPHY_CRSMINPOWERL2 B43_PHY_N(0x282)
+#define B43_NPHY_CRSMINPOWERU0 B43_PHY_N(0x283)
+#define B43_NPHY_CRSMINPOWERU1 B43_PHY_N(0x284)
+#define B43_NPHY_CRSMINPOWERU2 B43_PHY_N(0x285)
+#define B43_NPHY_STRPARAM B43_PHY_N(0x286)
+#define B43_NPHY_STRPARAML B43_PHY_N(0x287)
+#define B43_NPHY_STRPARAMU B43_PHY_N(0x288)
+#define B43_NPHY_BPHYCRSMINPOWER0 B43_PHY_N(0x289)
+#define B43_NPHY_BPHYCRSMINPOWER1 B43_PHY_N(0x28A)
+#define B43_NPHY_BPHYCRSMINPOWER2 B43_PHY_N(0x28B)
+#define B43_NPHY_BPHYFILTDEN0COEF B43_PHY_N(0x28C)
+#define B43_NPHY_BPHYFILTDEN1COEF B43_PHY_N(0x28D)
+#define B43_NPHY_BPHYFILTDEN2COEF B43_PHY_N(0x28E)
+#define B43_NPHY_BPHYFILTNUM0COEF B43_PHY_N(0x28F)
+#define B43_NPHY_BPHYFILTNUM1COEF B43_PHY_N(0x290)
+#define B43_NPHY_BPHYFILTNUM2COEF B43_PHY_N(0x291)
+#define B43_NPHY_BPHYFILTNUM01COEF2 B43_PHY_N(0x292)
+#define B43_NPHY_BPHYFILTBYPASS B43_PHY_N(0x293)
+#define B43_NPHY_SGILTRNOFFSET B43_PHY_N(0x294)
+#define B43_NPHY_RADAR_T2_MIN B43_PHY_N(0x295)
+#define B43_NPHY_TXPWRCTRLDAMPING B43_PHY_N(0x296)
#define B43_NPHY_PAPD_EN0 B43_PHY_N(0x297) /* PAPD Enable0 TBD */
#define B43_NPHY_EPS_TABLE_ADJ0 B43_PHY_N(0x298) /* EPS Table Adj0 TBD */
+#define B43_NPHY_EPS_OVERRIDEI_0 B43_PHY_N(0x299)
+#define B43_NPHY_EPS_OVERRIDEQ_0 B43_PHY_N(0x29A)
#define B43_NPHY_PAPD_EN1 B43_PHY_N(0x29B) /* PAPD Enable1 TBD */
#define B43_NPHY_EPS_TABLE_ADJ1 B43_PHY_N(0x29C) /* EPS Table Adj1 TBD */
+#define B43_NPHY_EPS_OVERRIDEI_1 B43_PHY_N(0x29D)
+#define B43_NPHY_EPS_OVERRIDEQ_1 B43_PHY_N(0x29E)
+#define B43_NPHY_PAPD_CAL_ADDRESS B43_PHY_N(0x29F)
+#define B43_NPHY_PAPD_CAL_YREFEPSILON B43_PHY_N(0x2A0)
+#define B43_NPHY_PAPD_CAL_SETTLE B43_PHY_N(0x2A1)
+#define B43_NPHY_PAPD_CAL_CORRELATE B43_PHY_N(0x2A2)
+#define B43_NPHY_PAPD_CAL_SHIFTS0 B43_PHY_N(0x2A3)
+#define B43_NPHY_PAPD_CAL_SHIFTS1 B43_PHY_N(0x2A4)
+#define B43_NPHY_SAMPLE_START_ADDR B43_PHY_N(0x2A5)
+#define B43_NPHY_RADAR_ADC_TO_DBM B43_PHY_N(0x2A6)
+#define B43_NPHY_REV3_C2_INITGAIN_A B43_PHY_N(0x2A7)
+#define B43_NPHY_REV3_C2_INITGAIN_B B43_PHY_N(0x2A8)
+#define B43_NPHY_REV3_C2_CLIP_HIGAIN_A B43_PHY_N(0x2A9)
+#define B43_NPHY_REV3_C2_CLIP_HIGAIN_B B43_PHY_N(0x2AA)
+#define B43_NPHY_REV3_C2_CLIP_MEDGAIN_A B43_PHY_N(0x2AB)
+#define B43_NPHY_REV3_C2_CLIP_MEDGAIN_B B43_PHY_N(0x2AC)
+#define B43_NPHY_REV3_C2_CLIP_LOGAIN_A B43_PHY_N(0x2AD)
+#define B43_NPHY_REV3_C2_CLIP_LOGAIN_B B43_PHY_N(0x2AE)
+#define B43_NPHY_REV3_C2_CLIP2_GAIN_A B43_PHY_N(0x2AF)
+#define B43_NPHY_REV3_C2_CLIP2_GAIN_B B43_PHY_N(0x2B0)
#define B43_PHY_B_BBCFG B43_PHY_N_BMODE(0x001) /* BB config */
#define B43_PHY_B_TEST B43_PHY_N_BMODE(0x00A)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/6] b43: N-PHY: use enum for INTC override function argument
2013-03-30 23:46 [PATCH 1/6] b43: use defines for board_type Rafał Miłecki
2013-03-30 23:46 ` [PATCH 2/6] b43: N-PHY: define missing registers Rafał Miłecki
@ 2013-03-30 23:46 ` Rafał Miłecki
2013-03-30 23:46 ` [PATCH 4/6] b43: N-PHY: use shortcut "ctl" in functions names Rafał Miłecki
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2013-03-30 23:46 UTC (permalink / raw)
To: b43-dev
Also make a function name shorter so we can easily fit 80 chars.
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 46 +++++++++++++++++++++++---------------
1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 8f730c5..418d967 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -69,6 +69,14 @@ enum b43_nphy_rf_sequence {
B43_RFSEQ_UPDATE_GAINU,
};
+enum n_intc_override {
+ N_INTC_OVERRIDE_OFF = 0,
+ N_INTC_OVERRIDE_TRSW = 1,
+ N_INTC_OVERRIDE_PA = 2,
+ N_INTC_OVERRIDE_EXT_LNA_PU = 3,
+ N_INTC_OVERRIDE_EXT_LNA_GAIN = 4,
+};
+
enum n_rssi_type {
N_RSSI_W1 = 0,
N_RSSI_W2,
@@ -99,7 +107,7 @@ static u8 b43_nphy_get_rx_core_state(struct b43_wldev *dev)
}
/**************************************************
- * RF (just without b43_nphy_rf_control_intc_override)
+ * RF (just without b43_nphy_rf_ctl_intc_override)
**************************************************/
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ForceRFSeq */
@@ -249,14 +257,14 @@ static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlIntcOverride */
-static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
- u16 value, u8 core)
+static void b43_nphy_rf_ctl_intc_override(struct b43_wldev *dev,
+ enum n_intc_override intc_override,
+ u16 value, u8 core)
{
u8 i, j;
u16 reg, tmp, val;
B43_WARN_ON(dev->phy.rev < 3);
- B43_WARN_ON(field > 4);
for (i = 0; i < 2; i++) {
if ((core == 1 && i == 1) || (core == 2 && !i))
@@ -266,12 +274,12 @@ static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
B43_NPHY_RFCTL_INTC1 : B43_NPHY_RFCTL_INTC2;
b43_phy_set(dev, reg, 0x400);
- switch (field) {
- case 0:
+ switch (intc_override) {
+ case N_INTC_OVERRIDE_OFF:
b43_phy_write(dev, reg, 0);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
break;
- case 1:
+ case N_INTC_OVERRIDE_TRSW:
if (!i) {
b43_phy_maskset(dev, B43_NPHY_RFCTL_INTC1,
0xFC3F, (value << 6));
@@ -312,7 +320,7 @@ static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
0xFFFE);
}
break;
- case 2:
+ case N_INTC_OVERRIDE_PA:
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
tmp = 0x0020;
val = value << 5;
@@ -322,7 +330,7 @@ static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
}
b43_phy_maskset(dev, reg, ~tmp, val);
break;
- case 3:
+ case N_INTC_OVERRIDE_EXT_LNA_PU:
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
tmp = 0x0001;
val = value;
@@ -332,7 +340,7 @@ static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
}
b43_phy_maskset(dev, reg, ~tmp, val);
break;
- case 4:
+ case N_INTC_OVERRIDE_EXT_LNA_GAIN:
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
tmp = 0x0002;
val = value << 1;
@@ -1618,8 +1626,8 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
for (i = 0; i < ARRAY_SIZE(regs_to_store); i++)
saved_regs_phy[i] = b43_phy_read(dev, regs_to_store[i]);
- b43_nphy_rf_control_intc_override(dev, 0, 0, 7);
- b43_nphy_rf_control_intc_override(dev, 1, 1, 7);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_OFF, 0, 7);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 1, 7);
b43_nphy_rf_control_override(dev, 0x1, 0, 0, false);
b43_nphy_rf_control_override(dev, 0x2, 1, 0, false);
b43_nphy_rf_control_override(dev, 0x80, 1, 0, false);
@@ -3619,7 +3627,7 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0007);
}
- b43_nphy_rf_control_intc_override(dev, 2, 0, 3);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_PA, 0, 3);
b43_nphy_rf_control_override(dev, 8, 0, 3, false);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
@@ -3630,8 +3638,10 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
rxval = 4;
txval = 2;
}
- b43_nphy_rf_control_intc_override(dev, 1, rxval, (core + 1));
- b43_nphy_rf_control_intc_override(dev, 1, txval, (2 - core));
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, rxval,
+ core + 1);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, txval,
+ 2 - core);
}
#endif
@@ -4190,9 +4200,9 @@ static void b43_nphy_tx_cal_phy_setup(struct b43_wldev *dev)
regs[7] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
regs[8] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
- b43_nphy_rf_control_intc_override(dev, 2, 1, 3);
- b43_nphy_rf_control_intc_override(dev, 1, 2, 1);
- b43_nphy_rf_control_intc_override(dev, 1, 8, 2);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_PA, 1, 3);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 2, 1);
+ b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 8, 2);
regs[9] = b43_phy_read(dev, B43_NPHY_PAPD_EN0);
regs[10] = b43_phy_read(dev, B43_NPHY_PAPD_EN1);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 4/6] b43: N-PHY: use shortcut "ctl" in functions names
2013-03-30 23:46 [PATCH 1/6] b43: use defines for board_type Rafał Miłecki
2013-03-30 23:46 ` [PATCH 2/6] b43: N-PHY: define missing registers Rafał Miłecki
2013-03-30 23:46 ` [PATCH 3/6] b43: N-PHY: use enum for INTC override function argument Rafał Miłecki
@ 2013-03-30 23:46 ` Rafał Miłecki
2013-03-30 23:46 ` [PATCH 5/6] b43: N-PHY: use defines for (re)storing VCM config Rafał Miłecki
2013-03-30 23:46 ` [PATCH 6/6] b43: N-PHY: move tables init function to tables file Rafał Miłecki
4 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2013-03-30 23:46 UTC (permalink / raw)
To: b43-dev
---
drivers/net/wireless/b43/phy_n.c | 44 +++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 418d967..5e6c319 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -141,9 +141,9 @@ ok:
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlOverrideRev7 */
-static void b43_nphy_rf_control_override_rev7(struct b43_wldev *dev, u16 field,
- u16 value, u8 core, bool off,
- u8 override)
+static void b43_nphy_rf_ctl_override_rev7(struct b43_wldev *dev, u16 field,
+ u16 value, u8 core, bool off,
+ u8 override)
{
const struct nphy_rf_control_override_rev7 *e;
u16 en_addrs[3][2] = {
@@ -181,8 +181,8 @@ static void b43_nphy_rf_control_override_rev7(struct b43_wldev *dev, u16 field,
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RFCtrlOverride */
-static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
- u16 value, u8 core, bool off)
+static void b43_nphy_rf_ctl_override(struct b43_wldev *dev, u16 field,
+ u16 value, u8 core, bool off)
{
int i;
u8 index = fls(field);
@@ -1628,17 +1628,17 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_OFF, 0, 7);
b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 1, 7);
- b43_nphy_rf_control_override(dev, 0x1, 0, 0, false);
- b43_nphy_rf_control_override(dev, 0x2, 1, 0, false);
- b43_nphy_rf_control_override(dev, 0x80, 1, 0, false);
- b43_nphy_rf_control_override(dev, 0x40, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x1, 0, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x2, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x80, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x40, 1, 0, false);
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
- b43_nphy_rf_control_override(dev, 0x20, 0, 0, false);
- b43_nphy_rf_control_override(dev, 0x10, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x20, 0, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x10, 1, 0, false);
} else {
- b43_nphy_rf_control_override(dev, 0x10, 0, 0, false);
- b43_nphy_rf_control_override(dev, 0x20, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x10, 0, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x20, 1, 0, false);
}
rx_core_state = b43_nphy_get_rx_core_state(dev);
@@ -2310,11 +2310,11 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
b43_ntab_write(dev, B43_NTAB16(7, 0x159 + core * 16),
rx2tx_lut_40_11n);
}
- b43_nphy_rf_control_override_rev7(dev, 16, 1, 3, false, 2);
+ b43_nphy_rf_ctl_override_rev7(dev, 16, 1, 3, false, 2);
}
b43_phy_write(dev, 0x32F, 0x3);
if (phy->radio_rev == 4 || phy->radio_rev == 6)
- b43_nphy_rf_control_override_rev7(dev, 4, 1, 3, false, 0);
+ b43_nphy_rf_ctl_override_rev7(dev, 4, 1, 3, false, 0);
if (phy->radio_rev == 3 || phy->radio_rev == 4 || phy->radio_rev == 6) {
if (sprom->revision &&
@@ -3174,9 +3174,9 @@ static void b43_nphy_tx_power_ctl_idle_tssi(struct b43_wldev *dev)
b43_nphy_ipa_internal_tssi_setup(dev);
if (phy->rev >= 7)
- b43_nphy_rf_control_override_rev7(dev, 0x2000, 0, 3, false, 0);
+ b43_nphy_rf_ctl_override_rev7(dev, 0x2000, 0, 3, false, 0);
else if (phy->rev >= 3)
- b43_nphy_rf_control_override(dev, 0x2000, 0, 3, false);
+ b43_nphy_rf_ctl_override(dev, 0x2000, 0, 3, false);
b43_nphy_stop_playback(dev);
b43_nphy_tx_tone(dev, 0xFA0, 0, false, false);
@@ -3186,9 +3186,9 @@ static void b43_nphy_tx_power_ctl_idle_tssi(struct b43_wldev *dev)
b43_nphy_rssi_select(dev, 0, N_RSSI_W1);
if (phy->rev >= 7)
- b43_nphy_rf_control_override_rev7(dev, 0x2000, 0, 3, true, 0);
+ b43_nphy_rf_ctl_override_rev7(dev, 0x2000, 0, 3, true, 0);
else if (phy->rev >= 3)
- b43_nphy_rf_control_override(dev, 0x2000, 0, 3, true);
+ b43_nphy_rf_ctl_override(dev, 0x2000, 0, 3, true);
if (phy->rev >= 3) {
nphy->pwr_ctl_info[0].idle_tssi_5g = (tmp >> 24) & 0xFF;
@@ -3628,7 +3628,7 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
}
b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_PA, 0, 3);
- b43_nphy_rf_control_override(dev, 8, 0, 3, false);
+ b43_nphy_rf_ctl_override(dev, 8, 0, 3, false);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
if (core == 0) {
@@ -4735,7 +4735,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
tmp[0] = ((cur_hpf2 << 8) | (cur_hpf1 << 4) |
(cur_lna << 2));
- b43_nphy_rf_control_override(dev, 0x400, tmp[0], 3,
+ b43_nphy_rf_ctl_override(dev, 0x400, tmp[0], 3,
false);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
b43_nphy_stop_playback(dev);
@@ -4784,7 +4784,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
break;
}
- b43_nphy_rf_control_override(dev, 0x400, 0, 3, true);
+ b43_nphy_rf_ctl_override(dev, 0x400, 0, 3, true);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x110), 2, gain_save);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 5/6] b43: N-PHY: use defines for (re)storing VCM config
2013-03-30 23:46 [PATCH 1/6] b43: use defines for board_type Rafał Miłecki
` (2 preceding siblings ...)
2013-03-30 23:46 ` [PATCH 4/6] b43: N-PHY: use shortcut "ctl" in functions names Rafał Miłecki
@ 2013-03-30 23:46 ` Rafał Miłecki
2013-03-30 23:46 ` [PATCH 6/6] b43: N-PHY: move tables init function to tables file Rafał Miłecki
4 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2013-03-30 23:46 UTC (permalink / raw)
To: b43-dev
---
drivers/net/wireless/b43/phy_n.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 5e6c319..3d0c6e2 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1748,8 +1748,13 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_5G;
rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_5G;
}
- rssical_radio_regs[0] = b43_radio_read(dev, 0x602B);
- rssical_radio_regs[0] = b43_radio_read(dev, 0x702B);
+ if (dev->phy.rev >= 7) {
+ } else {
+ rssical_radio_regs[0] = b43_radio_read(dev, B2056_RX0 |
+ B2056_RX_RSSI_MISC);
+ rssical_radio_regs[1] = b43_radio_read(dev, B2056_RX1 |
+ B2056_RX_RSSI_MISC);
+ }
rssical_phy_regs[0] = b43_phy_read(dev, B43_NPHY_RSSIMC_0I_RSSI_Z);
rssical_phy_regs[1] = b43_phy_read(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z);
rssical_phy_regs[2] = b43_phy_read(dev, B43_NPHY_RSSIMC_1I_RSSI_Z);
@@ -3903,9 +3908,13 @@ static void b43_nphy_restore_rssi_cal(struct b43_wldev *dev)
rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_5G;
}
- /* TODO use some definitions */
- b43_radio_maskset(dev, 0x602B, 0xE3, rssical_radio_regs[0]);
- b43_radio_maskset(dev, 0x702B, 0xE3, rssical_radio_regs[1]);
+ if (dev->phy.rev >= 7) {
+ } else {
+ b43_radio_maskset(dev, B2056_RX0 | B2056_RX_RSSI_MISC, 0xE3,
+ rssical_radio_regs[0]);
+ b43_radio_maskset(dev, B2056_RX1 | B2056_RX_RSSI_MISC, 0xE3,
+ rssical_radio_regs[1]);
+ }
b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Z, rssical_phy_regs[0]);
b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z, rssical_phy_regs[1]);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 6/6] b43: N-PHY: move tables init function to tables file
2013-03-30 23:46 [PATCH 1/6] b43: use defines for board_type Rafał Miłecki
` (3 preceding siblings ...)
2013-03-30 23:46 ` [PATCH 5/6] b43: N-PHY: use defines for (re)storing VCM config Rafał Miłecki
@ 2013-03-30 23:46 ` Rafał Miłecki
4 siblings, 0 replies; 6+ messages in thread
From: Rafał Miłecki @ 2013-03-30 23:46 UTC (permalink / raw)
To: b43-dev
---
drivers/net/wireless/b43/phy_n.c | 12 ------------
drivers/net/wireless/b43/tables_nphy.c | 13 +++++++++++--
drivers/net/wireless/b43/tables_nphy.h | 3 +--
3 files changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3d0c6e2..d9334c8d 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -4862,18 +4862,6 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
* N-PHY init
**************************************************/
-/*
- * Upload the N-PHY tables.
- * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
- */
-static void b43_nphy_tables_init(struct b43_wldev *dev)
-{
- if (dev->phy.rev < 3)
- b43_nphy_rev0_1_2_tables_init(dev);
- else
- b43_nphy_rev3plus_tables_init(dev);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
{
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index aaca60c..67a4573 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -3097,7 +3097,7 @@ void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
#define ntab_upload(dev, offset, data) do { \
b43_ntab_write_bulk(dev, offset, offset##_SIZE, data); \
} while (0)
-void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev)
+static void b43_nphy_tables_init_rev0(struct b43_wldev *dev)
{
/* Static tables */
ntab_upload(dev, B43_NTAB_FRAMESTRUCT, b43_ntab_framestruct);
@@ -3133,7 +3133,7 @@ void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev)
#define ntab_upload_r3(dev, offset, data) do { \
b43_ntab_write_bulk(dev, offset, ARRAY_SIZE(data), data); \
} while (0)
-void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev)
+static void b43_nphy_tables_init_rev3(struct b43_wldev *dev)
{
struct ssb_sprom *sprom = dev->dev->bus_sprom;
@@ -3174,6 +3174,15 @@ void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev)
B43_WARN_ON(1);
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables */
+void b43_nphy_tables_init(struct b43_wldev *dev)
+{
+ if (dev->phy.rev >= 3)
+ b43_nphy_tables_init_rev3(dev);
+ else
+ b43_nphy_tables_init_rev0(dev);
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetIpaGainTbl */
static const u32 *b43_nphy_get_ipa_gain_table(struct b43_wldev *dev)
{
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index c600700..df6c828 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -182,8 +182,7 @@ void b43_ntab_write(struct b43_wldev *dev, u32 offset, u32 value);
void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
unsigned int nr_elements, const void *_data);
-void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev);
-void b43_nphy_rev3plus_tables_init(struct b43_wldev *dev);
+void b43_nphy_tables_init(struct b43_wldev *dev);
const u32 *b43_nphy_get_tx_gain_table(struct b43_wldev *dev);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-03-30 23:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-30 23:46 [PATCH 1/6] b43: use defines for board_type Rafał Miłecki
2013-03-30 23:46 ` [PATCH 2/6] b43: N-PHY: define missing registers Rafał Miłecki
2013-03-30 23:46 ` [PATCH 3/6] b43: N-PHY: use enum for INTC override function argument Rafał Miłecki
2013-03-30 23:46 ` [PATCH 4/6] b43: N-PHY: use shortcut "ctl" in functions names Rafał Miłecki
2013-03-30 23:46 ` [PATCH 5/6] b43: N-PHY: use defines for (re)storing VCM config Rafał Miłecki
2013-03-30 23:46 ` [PATCH 6/6] b43: N-PHY: move tables init function to tables file Rafał Miłecki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).