From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 6/9] b43: N-PHY: prepare for rev 7+ RSSI calibration
Date: Sun, 20 Apr 2014 13:05:48 +0200 [thread overview]
Message-ID: <1397991951-13478-7-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1397991951-13478-1-git-send-email-zajec5@gmail.com>
Mostly just add place for future code
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
Empty code of conditional blocks makes checkpatch suspect some mistake,
but this is intended to be that way. It gives a good hint on further
implementation.
---
drivers/net/wireless/b43/phy_n.c | 72 ++++++++++++++++++++++++++++++----------
1 file changed, 54 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 0d4067e..291b38c 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1660,8 +1660,8 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
struct b43_phy_n *nphy = dev->phy.n;
u16 saved_regs_phy_rfctl[2];
- u16 saved_regs_phy[13];
- u16 regs_to_store[] = {
+ u16 saved_regs_phy[22];
+ u16 regs_to_store_rev3[] = {
B43_NPHY_AFECTL_OVER1, B43_NPHY_AFECTL_OVER,
B43_NPHY_AFECTL_C1, B43_NPHY_AFECTL_C2,
B43_NPHY_TXF_40CO_B1S1, B43_NPHY_RFCTL_OVER,
@@ -1670,6 +1670,20 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
B43_NPHY_RFCTL_LUT_TRSW_UP1, B43_NPHY_RFCTL_LUT_TRSW_UP2,
B43_NPHY_RFCTL_RSSIO1, B43_NPHY_RFCTL_RSSIO2
};
+ u16 regs_to_store_rev7[] = {
+ B43_NPHY_AFECTL_OVER1, B43_NPHY_AFECTL_OVER,
+ B43_NPHY_AFECTL_C1, B43_NPHY_AFECTL_C2,
+ B43_NPHY_TXF_40CO_B1S1, B43_NPHY_RFCTL_OVER,
+ 0x342, 0x343, 0x346, 0x347,
+ 0x2ff,
+ B43_NPHY_TXF_40CO_B1S0, B43_NPHY_TXF_40CO_B32S1,
+ B43_NPHY_RFCTL_CMD,
+ B43_NPHY_RFCTL_LUT_TRSW_UP1, B43_NPHY_RFCTL_LUT_TRSW_UP2,
+ 0x340, 0x341, 0x344, 0x345,
+ B43_NPHY_RFCTL_RSSIO1, B43_NPHY_RFCTL_RSSIO2
+ };
+ u16 *regs_to_store;
+ int regs_amount;
u16 class;
@@ -1689,6 +1703,15 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
u8 rx_core_state;
int core, i, j, vcm;
+ if (dev->phy.rev >= 7) {
+ regs_to_store = regs_to_store_rev7;
+ regs_amount = ARRAY_SIZE(regs_to_store_rev7);
+ } else {
+ regs_to_store = regs_to_store_rev3;
+ regs_amount = ARRAY_SIZE(regs_to_store_rev3);
+ }
+ BUG_ON(regs_amount > ARRAY_SIZE(saved_regs_phy));
+
class = b43_nphy_classifier(dev, 0, 0);
b43_nphy_classifier(dev, 7, 4);
b43_nphy_read_clip_detection(dev, clip_state);
@@ -1696,22 +1719,29 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
saved_regs_phy_rfctl[0] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
saved_regs_phy_rfctl[1] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
- for (i = 0; i < ARRAY_SIZE(regs_to_store); i++)
+ for (i = 0; i < regs_amount; i++)
saved_regs_phy[i] = b43_phy_read(dev, regs_to_store[i]);
b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_OFF, 0, 7);
b43_nphy_rf_ctl_intc_override(dev, N_INTC_OVERRIDE_TRSW, 1, 7);
- b43_nphy_rf_ctl_override(dev, 0x1, 0, 0, false);
- b43_nphy_rf_ctl_override(dev, 0x2, 1, 0, false);
- b43_nphy_rf_ctl_override(dev, 0x80, 1, 0, false);
- b43_nphy_rf_ctl_override(dev, 0x40, 1, 0, false);
-
- if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
- b43_nphy_rf_ctl_override(dev, 0x20, 0, 0, false);
- b43_nphy_rf_ctl_override(dev, 0x10, 1, 0, false);
+
+ if (dev->phy.rev >= 7) {
+ /* TODO */
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+ } else {
+ }
} else {
- b43_nphy_rf_ctl_override(dev, 0x10, 0, 0, false);
- b43_nphy_rf_ctl_override(dev, 0x20, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x1, 0, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x2, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x80, 1, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x40, 1, 0, false);
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+ b43_nphy_rf_ctl_override(dev, 0x20, 0, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x10, 1, 0, false);
+ } else {
+ b43_nphy_rf_ctl_override(dev, 0x10, 0, 0, false);
+ b43_nphy_rf_ctl_override(dev, 0x20, 1, 0, false);
+ }
}
rx_core_state = b43_nphy_get_rx_core_state(dev);
@@ -1726,8 +1756,11 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
/* Grab RSSI results for every possible VCM */
for (vcm = 0; vcm < 8; vcm++) {
- b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC, 0xE3,
- vcm << 2);
+ if (dev->phy.rev >= 7)
+ ;
+ else
+ b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC,
+ 0xE3, vcm << 2);
b43_nphy_poll_rssi(dev, N_RSSI_NB, results[vcm], 8);
}
@@ -1754,8 +1787,11 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
}
/* Select the best VCM */
- b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC, 0xE3,
- vcm_final << 2);
+ if (dev->phy.rev >= 7)
+ ;
+ else
+ b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC,
+ 0xE3, vcm_final << 2);
for (i = 0; i < 4; i++) {
if (core != i / 2)
@@ -1810,7 +1846,7 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
b43_phy_set(dev, B43_NPHY_RFCTL_CMD, B43_NPHY_RFCTL_CMD_RXTX);
b43_phy_mask(dev, B43_NPHY_RFCTL_OVER, ~0x1);
- for (i = 0; i < ARRAY_SIZE(regs_to_store); i++)
+ for (i = 0; i < regs_amount; i++)
b43_phy_write(dev, regs_to_store[i], saved_regs_phy[i]);
/* Store for future configuration */
--
1.8.4.5
next prev parent reply other threads:[~2014-04-20 11:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-20 11:05 [PATCH 0/9][wireless-next] b43: update N-PHY code Rafał Miłecki
2014-04-20 11:05 ` [PATCH 1/9] b43: N-PHY: drop second noise variance table Rafał Miłecki
2014-04-20 11:05 ` [PATCH 2/9] b43: N-PHY: rev3+: complete workarounds Rafał Miłecki
2014-04-20 11:05 ` [PATCH 3/9] b43: N-PHY: random updates and typo fixes all around Rafał Miłecki
2014-04-20 11:05 ` [PATCH 4/9] b43: N-PHY: implement reading support for radio 0x2057 Rafał Miłecki
2014-04-20 11:05 ` [PATCH 5/9] b43: N-PHY: implement RF control INTC for revs 7+ Rafał Miłecki
2014-04-20 11:05 ` Rafał Miłecki [this message]
2014-04-20 11:05 ` [PATCH 7/9] b43: N-PHY: add init & calib values for radio 0x2056 rev 11 Rafał Miłecki
2014-04-20 11:05 ` [PATCH 8/9] b43: N-PHY: fix selection of init & calib values Rafał Miłecki
2014-04-20 11:05 ` [PATCH 9/9] b43: N-PHY: enable forgotten write of hw power adjust table Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397991951-13478-7-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).