From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH] b43: N-PHY: complete radio 0x2056 setup
Date: Sat, 26 Apr 2014 20:56:05 +0200 [thread overview]
Message-ID: <1398538565-28188-1-git-send-email-zajec5@gmail.com> (raw)
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 482b312..41dab89 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -807,9 +807,16 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
u16 bias, cbias;
u16 pag_boost, padg_boost, pgag_boost, mixg_boost;
u16 paa_boost, pada_boost, pgaa_boost, mixa_boost;
+ bool is_pkg_fab_smic;
B43_WARN_ON(dev->phy.rev < 3);
+ is_pkg_fab_smic =
+ ((dev->dev->chip_id == BCMA_CHIP_ID_BCM43224 ||
+ dev->dev->chip_id == BCMA_CHIP_ID_BCM43225 ||
+ dev->dev->chip_id == BCMA_CHIP_ID_BCM43421) &&
+ dev->dev->chip_pkg == BCMA_PKG_ID_BCM43224_FAB_SMIC);
+
b43_chantab_radio_2056_upload(dev, e);
b2056_upload_syn_pll_cp2(dev, band == IEEE80211_BAND_5GHZ);
@@ -817,7 +824,8 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER1, 0x1F);
b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER2, 0x1F);
- if (dev->dev->chip_id == 0x4716) {
+ if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 ||
+ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162) {
b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER4, 0x14);
b43_radio_write(dev, B2056_SYN_PLL_CP2, 0);
} else {
@@ -825,6 +833,13 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
b43_radio_write(dev, B2056_SYN_PLL_CP2, 0x14);
}
}
+ if (sprom->boardflags2_hi & B43_BFH2_GPLL_WAR2 &&
+ b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER1, 0x1f);
+ b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER2, 0x1f);
+ b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER4, 0x0b);
+ b43_radio_write(dev, B2056_SYN_PLL_CP2, 0x20);
+ }
if (sprom->boardflags2_lo & B43_BFL2_APLL_WAR &&
b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER1, 0x1F);
@@ -840,7 +855,8 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
b43_radio_write(dev,
offset | B2056_TX_PADG_IDAC, 0xcc);
- if (dev->dev->chip_id == 0x4716) {
+ if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 ||
+ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162) {
bias = 0x40;
cbias = 0x45;
pag_boost = 0x5;
@@ -849,6 +865,10 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
} else {
bias = 0x25;
cbias = 0x20;
+ if (is_pkg_fab_smic) {
+ bias = 0x2a;
+ cbias = 0x38;
+ }
pag_boost = 0x4;
pgag_boost = 0x03;
mixg_boost = 0x65;
@@ -917,6 +937,8 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
mixa_boost = 0xF;
}
+ cbias = is_pkg_fab_smic ? 0x35 : 0x30;
+
for (i = 0; i < 2; i++) {
offset = i ? B2056_TX1 : B2056_TX0;
@@ -935,11 +957,11 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
b43_radio_write(dev,
offset | B2056_TX_PADA_CASCBIAS, 0x03);
b43_radio_write(dev,
- offset | B2056_TX_INTPAA_IAUX_STAT, 0x50);
+ offset | B2056_TX_INTPAA_IAUX_STAT, 0x30);
b43_radio_write(dev,
- offset | B2056_TX_INTPAA_IMAIN_STAT, 0x50);
+ offset | B2056_TX_INTPAA_IMAIN_STAT, 0x30);
b43_radio_write(dev,
- offset | B2056_TX_INTPAA_CASCBIAS, 0x30);
+ offset | B2056_TX_INTPAA_CASCBIAS, cbias);
}
}
--
1.8.4.5
reply other threads:[~2014-04-26 18:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398538565-28188-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).