[PATCH V3] b43: adjust code to compile without SSB

["Rafał Miłecki" <zajec5@gmail.com>]

Users of new (BCMA based) wireless chipsets may not want to enable SSB.
This is hopefully the last code patch for dropping SSB dependency.

Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
V2: Replace
#ifdef CONFIG_SSB_DRIVER_PCICORE
with
#if defined(CONFIG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)

V3: Rebase on wireless-next instead of my own b43-next

John: please apply this one *before* the:
[PATCH V2] b43: drop SSB dependency
Sorry for this order mess.
---
 drivers/net/wireless/b43/Kconfig |  2 +-
 drivers/net/wireless/b43/bus.h   | 10 ++++++++++
 drivers/net/wireless/b43/main.c  | 19 ++++++++++++++++++-
 3 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 088d544..ce937a9 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -116,7 +116,7 @@ config B43_PHY_N
 
 config B43_PHY_LP
 	bool "Support for low-power (LP-PHY) devices"
-	depends on B43
+	depends on B43 && B43_SSB
 	default y
 	---help---
 	  Support for the LP-PHY.
diff --git a/drivers/net/wireless/b43/bus.h b/drivers/net/wireless/b43/bus.h
index 184c956..f3205c6 100644
--- a/drivers/net/wireless/b43/bus.h
+++ b/drivers/net/wireless/b43/bus.h
@@ -5,7 +5,9 @@ enum b43_bus_type {
 #ifdef CONFIG_B43_BCMA
 	B43_BUS_BCMA,
 #endif
+#ifdef CONFIG_B43_SSB
 	B43_BUS_SSB,
+#endif
 };
 
 struct b43_bus_dev {
@@ -52,13 +54,21 @@ struct b43_bus_dev {
 
 static inline bool b43_bus_host_is_pcmcia(struct b43_bus_dev *dev)
 {
+#ifdef CONFIG_B43_SSB
 	return (dev->bus_type == B43_BUS_SSB &&
 		dev->sdev->bus->bustype == SSB_BUSTYPE_PCMCIA);
+#else
+	return false;
+#endif
 }
 static inline bool b43_bus_host_is_sdio(struct b43_bus_dev *dev)
 {
+#ifdef CONFIG_B43_SSB
 	return (dev->bus_type == B43_BUS_SSB &&
 		dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO);
+#else
+	return false;
+#endif
 }
 
 struct b43_bus_dev *b43_bus_dev_bcma_init(struct bcma_device *core);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 32e08d3..558abe7 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1208,6 +1208,7 @@ static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
 }
 #endif
 
+#ifdef CONFIG_B43_SSB
 static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
 {
 	struct ssb_device *sdev = dev->dev->sdev;
@@ -1235,6 +1236,7 @@ static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
 	ssb_read32(sdev, SSB_TMSLOW);	/* flush */
 	msleep(1);
 }
+#endif
 
 void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
 {
@@ -2735,6 +2737,8 @@ out:
 /* Initialize the GPIOs
  * http://bcm-specs.sipsolutions.net/GPIO
  */
+
+#ifdef CONFIG_B43_SSB
 static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
 {
 	struct ssb_bus *bus = dev->dev->sdev->bus;
@@ -2745,10 +2749,13 @@ static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
 	return bus->chipco.dev;
 #endif
 }
+#endif
 
 static int b43_gpio_init(struct b43_wldev *dev)
 {
+#ifdef CONFIG_B43_SSB
 	struct ssb_device *gpiodev;
+#endif
 	u32 mask, set;
 
 	b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
@@ -2807,7 +2814,9 @@ static int b43_gpio_init(struct b43_wldev *dev)
 /* Turn off all GPIO stuff. Call this on module unload, for example. */
 static void b43_gpio_cleanup(struct b43_wldev *dev)
 {
+#ifdef CONFIG_B43_SSB
 	struct ssb_device *gpiodev;
+#endif
 
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
@@ -3692,7 +3701,9 @@ static void b43_op_set_tsf(struct ieee80211_hw *hw,
 
 static void b43_put_phy_into_reset(struct b43_wldev *dev)
 {
+#ifdef CONFIG_B43_SSB
 	u32 tmp;
+#endif
 
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
@@ -4582,8 +4593,12 @@ static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
 	struct ssb_bus *bus;
 	u32 tmp;
 
+#ifdef CONFIG_B43_SSB
 	if (dev->dev->bus_type != B43_BUS_SSB)
 		return;
+#else
+	return;
+#endif
 
 	bus = dev->dev->sdev->bus;
 
@@ -4738,7 +4753,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 	}
 	if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
 		hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
-#ifdef CONFIG_SSB_DRIVER_PCICORE
+#if defined(CONFIG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
 	if (dev->dev->bus_type == B43_BUS_SSB &&
 	    dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
 	    dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
@@ -5310,6 +5325,7 @@ static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl)
 	(pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) &&	\
 	(pdev->subsystem_device == _subdevice)				)
 
+#ifdef CONFIG_B43_SSB
 static void b43_sprom_fixup(struct ssb_bus *bus)
 {
 	struct pci_dev *pdev;
@@ -5341,6 +5357,7 @@ static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl)
 	ssb_set_devtypedata(dev->sdev, NULL);
 	ieee80211_free_hw(hw);
 }
+#endif
 
 static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 {
-- 
1.8.4.5