From mboxrd@z Thu Jan 1 00:00:00 1970 From: Cyrille Date: Sat, 21 Aug 2010 19:31:50 +0200 Subject: Problem with BCM4312 802.11b/g [14e4:4315] Message-ID: <20100821193150.fbd36368.cyrille@cbiot.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: b43-dev@lists.infradead.org Hi I'm a BLAG user with BCM4312 802.11b/g [14e4:4315] (rev 01). But don't seem work. I tested to compile myself the driver like explain here http://wireless.kernel.org/en/users/Drivers/b43#device_firmware_installation with the source file : broadcom-wl-4.150.10.5.tar.bz2 and too this source file broadcom-wl-4.178.10.4.tar.bz2 but always the same error notification. - - - - dmesg | tail b43 ssb0:0: firmware: requesting b43-open/lp0initvals15.fw b43 ssb0:0: firmware: requesting b43-open/lp0bsinitvals15.fw b43-phy0 ERROR: Rejected non-Free firmware - - - The dir is b43-open --> specific to BLAG. lspci -vnn 0b:00.0 0280: 14e4:4315 (rev 01) Subsystem: 1028:000b Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: wl ---> I write with another driver Kernel modules: wl, ssb ---> ***** uname : 2.6.32.11-libre.99.fc12.x86_64 Finally, I have installed broadcom-wl from rpmfusion nonfree. It works great but it's non free :-( So I report the situation to you if ever you want the debug it! More info here : http://forums.blagblagblag.org/viewtopic.php?p=27627 Thanx a lot ! Cheers ! Cyrille ---- [ cyrille at cbiot.fr | http://cbiot.fr ] "Ils ne me comprennent point, je ne suis pas la bouche qui convient ??ces oreilles" - - - Ainsi parlait Zarathoustra - - - - - - - - - - - - - - NIETZSCHE - - - Blag'em up! http://zenblagger.org