From: "Jesús Vidal Panalés" <jesusvpct@vodafone.es>
To: b43-dev@lists.infradead.org
Subject: Broadcom 4303 HP Pavilion zv5000
Date: Mon, 17 Oct 2011 10:30:26 +0200 [thread overview]
Message-ID: <4E9BE7A2.4060703@vodafone.es> (raw)
Hello, i have an older computer from my father (HP Pavilion zv5168ea)
and i decided to install a Xubuntu distro (tried 11.10, now 11.04) for
my personal use, but i can't get a wireless connection to my router (i'm
using WPA-personal encryption but tried with open and nothing). The
driver is installed, i can see wifi essid on NetworkManager but the
connection is never carried out. I've installed
firmware-b43legacy-installer because it has the driver for this card but
nothing...
This is the output of lspci -vnn (only wireless card part)
02:02.0 Network controller [0280]: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller [14e4:4301] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:12f3]
Flags: bus master, fast devsel, latency 64, IRQ 11
Memory at e0104000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
This is rfkill list output:
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lsmod output:
Module Size Used by
b43legacy 127415 0
ssb 45942 1 b43legacy
mac80211 257001 1 b43legacy
cfg80211 156212 2 b43legacy,mac80211
snd_intel8x0 33213 3
arc4 12473 2
snd_ac97_codec 105614 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80042 2 snd_intel8x0,snd_ac97_codec
nouveau 621970 2
snd_seq_midi 13132 0
snd_rawmidi 25269 1 snd_seq_midi
ttm 65184 1 nouveau
snd_seq_midi_event 14475 1 snd_seq_midi
pcmcia 39671 0
snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event
drm_kms_helper 40745 1 nouveau
snd_timer 28659 2 snd_pcm,snd_seq
snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq
drm 184164 4 nouveau,ttm,drm_kms_helper
yenta_socket 27230 0
ppdev 12849 0
joydev 17322 0
pcmcia_rsrc 18292 1 yenta_socket
i2c_algo_bit 13184 1 nouveau
snd 55295 13 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcmcia_core 21505 3 pcmcia,yenta_socket,pcmcia_rsrc
soundcore 12600 1 snd
snd_page_alloc 14073 2 snd_intel8x0,snd_pcm
i2c_nforce2 12906 0
k8temp 12872 0
psmouse 73312 0
shpchp 32345 0
serio_raw 12990 0
parport_pc 32111 1
video 18951 1 nouveau
lp 13349 0
parport 36746 3 ppdev,parport_pc,lp
firewire_ohci 31504 0
8139too 23208 0
8139cp 22497 0
pata_amd 13762 2
firewire_core 56138 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
A piece of dmesg output:
[ 1491.019304] b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNK3] -> GSI 11 (level, low) -> IRQ 11
[ 1491.086827] b43legacy-phy0: Broadcom 4301 WLAN found
[ 1491.108067] b43legacy-phy0 debug: Found PHY: Analog 0, Type 1, Revision 4
[ 1491.108093] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 1491.132056] b43legacy-phy0 debug: Radio initialized
[ 1491.432090] b43legacy-phy0: Loading firmware version 0x127, patch level 14 (2005-04-18 02:36:27)
[ 1491.556324] b43legacy-phy0 debug: Chip initialized
[ 1491.556589] b43legacy-phy0 debug: 30-bit DMA initialized
[ 1491.558904] Registered led device: b43legacy-phy0::tx
[ 1491.558943] Registered led device: b43legacy-phy0::rx
[ 1491.558975] Registered led device: b43legacy-phy0::radio
[ 1491.559001] b43legacy-phy0 debug: Wireless interface started
[ 1491.564107] b43legacy-phy0 debug: Adding Interface type 2
[ 1555.492498] wlan0: direct probe to 20:cf:30:ce:0e:c7 (try 1/3)
[ 1555.692058] wlan0: direct probe to 20:cf:30:ce:0e:c7 (try 2/3)
[ 1555.892059] wlan0: direct probe to 20:cf:30:ce:0e:c7 (try 3/3)
[ 1556.092059] wlan0: direct probe to 20:cf:30:ce:0e:c7 timed out
[ 1882.024387] b43legacy-phy0 warning: Unexpected value for chanstat (0xC00)
Any suggestion? Thanks in advance.
next reply other threads:[~2011-10-17 8:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 8:30 Jesús Vidal Panalés [this message]
2011-10-17 9:41 ` Broadcom 4303 HP Pavilion zv5000 Rafał Miłecki
2011-10-17 14:21 ` Jesús Vidal Panalés
2011-10-17 14:46 ` Larry Finger
2011-10-17 14:54 ` Jesús Vidal Panalés
2011-10-18 15:05 ` Jesús Vidal Panalés
2011-10-18 15:34 ` Larry Finger
[not found] ` <4E9DB5FD.6090902@vodafone.es>
2011-10-18 18:30 ` Larry Finger
2011-10-18 19:15 ` Jesús Vidal Panalés
2011-10-18 19:31 ` Larry Finger
2011-10-18 19:43 ` Jesús Vidal Panalés
2011-10-18 20:05 ` Larry Finger
2011-10-18 20:39 ` Jesús Vidal Panalés
2011-10-18 21:05 ` Larry Finger
2011-10-19 12:15 ` Jesús Vidal Panalés
2011-10-19 12:42 ` Larry Finger
2011-10-19 13:14 ` Jesús Vidal Panalés
2011-10-19 14:21 ` Larry Finger
2011-10-19 14:27 ` Jesús Vidal Panalés
2011-10-19 17:26 ` Jesús Vidal Panalés
2011-10-19 21:14 ` Jesús Vidal Panalés
2011-10-19 23:29 ` Larry Finger
2011-10-20 8:10 ` Jesús Vidal Panalés
2011-10-21 10:53 ` Rafał Miłecki
2011-10-21 12:09 ` Jesús Vidal Panalés
2011-10-21 12:14 ` Rafał Miłecki
2011-10-21 19:54 ` Jesús Vidal Panalés
2011-12-01 11:51 ` Jesús Vidal Panalés
2011-12-01 16:07 ` Larry Finger
2011-12-01 16:28 ` Jesús Vidal Panalés
2011-12-01 20:55 ` Jesús Vidal Panalés
2011-12-01 21:17 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9BE7A2.4060703@vodafone.es \
--to=jesusvpct@vodafone.es \
--cc=b43-dev@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox