From: Arseny Klimovsky <arseny.klimovsky@gmail.com>
To: b43-dev@lists.infradead.org
Subject: Problem with BCM4312 and EAP mode
Date: Tue, 25 Oct 2011 00:10:01 +0400 [thread overview]
Message-ID: <4EA5C619.4010408@gmail.com> (raw)
Hello, list
I'm using b43 driver on laptop Dell Latitude E4300. It works great at
home with WPA-PSK mode, thank you!
But I cannot use it in a WPA-EAP mode.
The system log is full with such errors when I try to connect to the net:
Oct 24 11:32:26 odette-laptop kernel: [596357.880058] b43-phy0 ERROR:
MAC suspend failed
It is Ubuntu 10.04.3 with new vanilla kernel
$ uname -a
Linux odette-laptop 3.0.4-030004-generic #201108301138 SMP Tue Aug 30
11:42:30 UTC 2011 x86_64 GNU/Linux
$ lspci -v
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Dell Device 000c
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information <?>
Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [13c] Virtual Channel <?>
Capabilities: [160] Device Serial Number 60-0c-59-ff-ff-76-4f-97
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
I've seen a similar message in the list:
http://lists.infradead.org/pipermail/b43-dev/2011-September/002090.html
What information should I provide to help you to debug the problem?
--
Arseny Klimovsky
reply other threads:[~2011-10-24 20:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA5C619.4010408@gmail.com \
--to=arseny.klimovsky@gmail.com \
--cc=b43-dev@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).