[PATCH V3] b43: be more user friendly with PHY info

[Oleksij Rempel <bug-track@fisher-privat.net>]

Am 26.07.2012 08:10, schrieb Rafa? Mi?ecki:
> 2012/7/26 G?bor Stefanik <netrolller.3d@gmail.com>:
>> On Thu, Jul 26, 2012 at 8:16 AM, Rafa? Mi?ecki <zajec5@gmail.com> wrote:
>>> First of all, use PHY names instead of magic numbers. It should make
>>> configuring kernel easier in case of not enabled PHY type support.
>>> Secondly, always print info about PHY. This is really basic info about
>>> hardware and quite important for the support level.
>>>
>>> Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
>>> ---
>>> V2: add new PHYTYPEs
>>> V3: don't printk error in b43_phy_name, just return "UNKNOWN". We still
>>>     can know PHY type thanks to change in caller, which prints both:
>>>     %d and %s. Thanks Joe!
>>> ---
>>>  drivers/net/wireless/b43/b43.h  |    2 ++
>>>  drivers/net/wireless/b43/main.c |   39 ++++++++++++++++++++++++++++++++++-----
>>>  2 files changed, 36 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
>>> index 7c899fc..b0c7f47 100644
>>> --- a/drivers/net/wireless/b43/b43.h
>>> +++ b/drivers/net/wireless/b43/b43.h
>>> @@ -415,6 +415,8 @@ enum {
>>>  #define B43_PHYTYPE_HT                 0x07
>>>  #define B43_PHYTYPE_LCN                        0x08
>>>  #define B43_PHYTYPE_LCNXN              0x09
>>> +#define B43_PHYTYPE_LCN40              0x0a
>>> +#define B43_PHYTYPE_AC                 0x0b
>>>
>>>  /* PHYRegisters */
>>>  #define B43_PHY_ILT_A_CTRL             0x0072
>>> diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
>>> index b80352b..a8f812b 100644
>>> --- a/drivers/net/wireless/b43/main.c
>>> +++ b/drivers/net/wireless/b43/main.c
>>> @@ -4277,6 +4277,35 @@ out:
>>>         return err;
>>>  }
>>>
>>> +static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type)
>>> +{
>>> +       switch (phy_type) {
>>> +       case B43_PHYTYPE_A:
>>> +               return "A";
>>> +       case B43_PHYTYPE_B:
>>> +               return "B";
>>> +       case B43_PHYTYPE_G:
>>> +               return "G";
>>> +       case B43_PHYTYPE_N:
>>> +               return "N";
>>> +       case B43_PHYTYPE_LP:
>>> +               return "LP";
>>> +       case B43_PHYTYPE_SSLPN:
>>> +               return "SSLPN";
>>> +       case B43_PHYTYPE_HT:
>>> +               return "HT";
>>> +       case B43_PHYTYPE_LCN:
>>> +               return "LCN";
>>> +       case B43_PHYTYPE_LCNXN:
>>> +               return "LCNXN";
>>> +       case B43_PHYTYPE_LCN40:
>>> +               return "LCN40";
>>> +       case B43_PHYTYPE_AC:
>>> +               return "AC";
>>> +       }
>>> +       return "UNKNOWN";
>>
>> How about putting the PHY type ID into the string in the Unknown case?
>> Or will it be printed somewhere else?
> 
> Hm, maybe I don't see something obvious. How would you do that? Using
> which function?
> 

No need to, it is done here:
b43info(dev->wl, "Found PHY: Analog %u, Type %d (%s), Revision %u\n",
	analog_type, phy_type, b43_phy_name(dev, phy_type), phy_rev);

-- 
Regards,
Oleksij