* b43 bcm43228 and linux 3.18.3 [not found] ` <CACaajQs1r1tE-GXv7cmAL9w8q2cwn_iiDttp6tLFB7BdSBNDPw@mail.gmail.com> @ 2015-01-19 15:45 ` Arend van Spriel 2015-01-20 10:24 ` Vasiliy Tolstov 0 siblings, 1 reply; 5+ messages in thread From: Arend van Spriel @ 2015-01-19 15:45 UTC (permalink / raw) To: Vasiliy Tolstov; +Cc: linux-wireless, b43-dev + b43-dev at lists.infradead.org On 01/19/15 13:20, Vasiliy Tolstov wrote: > Anybody can helps me debug this? > > 2015-01-17 20:59 GMT+03:00 Vasiliy Tolstov<v.tolstov@selfip.ru>: >> Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but >> after connection with my zyxel router i can't ping it ip (after 1-2 >> min). Connection worked fin, but nothing transmitted =(. >> I'm try to disable qos, but this not helps, i'm try to enable >> verbose=3, but in dmesg nothing interesting. Time after time b43 >> driver moved from 5Ghz to 2.4Ghz to 5Ghz and so. What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming between the two bands? Anyway, there is a b43 specific mailing list which I added. Regards, Arend >> How can i debug this issue? I'm realy love free opensource drivers. >> Thanks >> >> -- >> Vasiliy Tolstov, >> e-mail: v.tolstov at selfip.ru >> jabber: vase at selfip.ru > > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* b43 bcm43228 and linux 3.18.3 2015-01-19 15:45 ` b43 bcm43228 and linux 3.18.3 Arend van Spriel @ 2015-01-20 10:24 ` Vasiliy Tolstov 2015-01-20 10:31 ` Arend van Spriel 0 siblings, 1 reply; 5+ messages in thread From: Vasiliy Tolstov @ 2015-01-20 10:24 UTC (permalink / raw) To: Arend van Spriel; +Cc: linux-wireless, b43-dev 2015-01-19 18:45 GMT+03:00 Arend van Spriel <arend@broadcom.com>: > What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming > between the two bands? Yes, i have zyxel keenetic start that supports b/g/n > Anyway, there is a b43 specific mailing list which I > added. Thanks. I don't know about this list. -- Vasiliy Tolstov, e-mail: v.tolstov at selfip.ru jabber: vase at selfip.ru ^ permalink raw reply [flat|nested] 5+ messages in thread
* b43 bcm43228 and linux 3.18.3 2015-01-20 10:24 ` Vasiliy Tolstov @ 2015-01-20 10:31 ` Arend van Spriel 2015-01-20 10:48 ` Vasiliy Tolstov 0 siblings, 1 reply; 5+ messages in thread From: Arend van Spriel @ 2015-01-20 10:31 UTC (permalink / raw) To: Vasiliy Tolstov; +Cc: linux-wireless, b43-dev On 01/20/15 11:24, Vasiliy Tolstov wrote: > 2015-01-19 18:45 GMT+03:00 Arend van Spriel<arend@broadcom.com>: >> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming >> between the two bands? > > Yes, i have zyxel keenetic start that supports b/g/n 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a' as well. Anyway, does that router let you specify the SSID for both 2.4G and 5G. Are you using same SSID for both? Regards, Arend >> Anyway, there is a b43 specific mailing list which I >> added. > > > Thanks. I don't know about this list. > ^ permalink raw reply [flat|nested] 5+ messages in thread
* b43 bcm43228 and linux 3.18.3 2015-01-20 10:31 ` Arend van Spriel @ 2015-01-20 10:48 ` Vasiliy Tolstov 2015-02-22 21:31 ` Vasiliy Tolstov 0 siblings, 1 reply; 5+ messages in thread From: Vasiliy Tolstov @ 2015-01-20 10:48 UTC (permalink / raw) To: Arend van Spriel; +Cc: linux-wireless, b43-dev 2015-01-20 13:31 GMT+03:00 Arend van Spriel <arend@broadcom.com>: > 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a' > as well. Anyway, does that router let you specify the SSID for both 2.4G and > 5G. Are you using same SSID for both? As i see i can't specify different SSID for 2.4G and 5G (only one ssid available). Does it possible to not roam between bands in b43 driver? -- Vasiliy Tolstov, e-mail: v.tolstov at selfip.ru jabber: vase at selfip.ru ^ permalink raw reply [flat|nested] 5+ messages in thread
* b43 bcm43228 and linux 3.18.3 2015-01-20 10:48 ` Vasiliy Tolstov @ 2015-02-22 21:31 ` Vasiliy Tolstov 0 siblings, 0 replies; 5+ messages in thread From: Vasiliy Tolstov @ 2015-02-22 21:31 UTC (permalink / raw) To: Vasiliy Tolstov; +Cc: Arend van Spriel, linux-wireless, b43-dev I'm switch to 3.19 kernel, now debug info contains: [ 286.557369] b43-phy0 ERROR: PHY transmission error [ 286.557551] b43-phy0 ERROR: PHY transmission error [ 290.412335] b43-phy0 ERROR: PHY transmission error [ 303.809876] b43-phy0 debug: Switching to 5 GHz band [ 303.957855] b43-phy0 debug: Switching to 2.4 GHz band [ 304.296705] b43-phy0 debug: Switching to 5 GHz band [ 304.444641] b43-phy0 debug: Switching to 2.4 GHz band [ 304.784427] b43-phy0 debug: Switching to 5 GHz band [ 304.932492] b43-phy0 debug: Switching to 2.4 GHz band [ 305.273372] b43-phy0 debug: Switching to 5 GHz band [ 305.424327] b43-phy0 debug: Switching to 2.4 GHz band and i have sometimes stuck in tcp/udp transmissions. 2015-01-20 13:48 GMT+03:00 Vasiliy Tolstov <v.tolstov@selfip.ru>: > 2015-01-20 13:31 GMT+03:00 Arend van Spriel <arend@broadcom.com>: >> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a' >> as well. Anyway, does that router let you specify the SSID for both 2.4G and >> 5G. Are you using same SSID for both? > > > As i see i can't specify different SSID for 2.4G and 5G (only one ssid > available). Does it possible to not roam between bands in b43 driver? > > -- > Vasiliy Tolstov, > e-mail: v.tolstov at selfip.ru > jabber: vase at selfip.ru -- Vasiliy Tolstov, e-mail: v.tolstov at selfip.ru jabber: vase at selfip.ru ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-02-22 21:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CACaajQsqPMzwD=EqdD5_XfWAPmkn-52VVNHF1ntFZ6ofEH4D-w@mail.gmail.com>
[not found] ` <CACaajQs1r1tE-GXv7cmAL9w8q2cwn_iiDttp6tLFB7BdSBNDPw@mail.gmail.com>
2015-01-19 15:45 ` b43 bcm43228 and linux 3.18.3 Arend van Spriel
2015-01-20 10:24 ` Vasiliy Tolstov
2015-01-20 10:31 ` Arend van Spriel
2015-01-20 10:48 ` Vasiliy Tolstov
2015-02-22 21:31 ` Vasiliy Tolstov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).