From mboxrd@z Thu Jan 1 00:00:00 1970 From: chris at martin.cc Date: Wed, 9 Mar 2011 11:47:14 +1100 Subject: Switching to 4.174.64.19 firmware for G-PHY cards? In-Reply-To: References: <4CFE538A.10808@lwfinger.net> <4CFE8934.4060803@hauke-m.de> <4D6EBDE0.8020005@lwfinger.net> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: b43-dev@lists.infradead.org 2011/3/9 chris at martin.cc > 2011/3/9 Rafa? Mi?ecki > > W dniu 8 marca 2011 02:25 u?ytkownik chris at martin.cc >> napisa?: >> > >> > 2011/3/8 Rafa? Mi?ecki >> >> >> >> W dniu 4 marca 2011 01:37 u?ytkownik chris at martin.cc >> >> napisa?: >> >> > Maybe the way to investigate this further is to look at what is being >> >> > passed between >> >> > mac80211 and b43, with the different firmwares. >> >> > >> >> > I will add some debugging on the weekend and see what I can uncover. >> >> >> >> Maybe it'd make sense to check what we get from hardware with older >> >> vs. newer firmware? >> >> >> >> Attached patch was compile-tested only. >> >> >> >> It may put a lot of messages in your dmesg, don't try to run it for too >> >> long ;) >> >> >> > > I the just tested the patch > Very curious.. I get nothing. > > I double checked that the patch was applied. > I cleaned the object files, to ensure that it was compiled > I ensured that CONFIG_B43_DEBUG was enabled > > But the lines are never called > I also tried both experimental and stable, with the same result ---------------------------------------------------------- Chris Martin m: +61 419 812 371 ---------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL: