From: "Gábor Stefanik" <netrolller.3d@gmail.com>
To: Cyrille <cyrille@cbiot.fr>
Cc: b43-dev@lists.infradead.org,
John Linville <linville@tuxdriver.com>,
linux-wireless <linux-wireless@vger.kernel.org>
Subject: problem with b43
Date: Fri, 24 Sep 2010 19:06:17 +0200 [thread overview]
Message-ID: <AANLkTik5QPw6K_CFQW-5qH3PhyDAguqe51AcNaDMOUqt@mail.gmail.com> (raw)
In-Reply-To: <20100924185551.e3c3b41c.cyrille@cbiot.fr>
On Fri, Sep 24, 2010 at 6:55 PM, Cyrille <cyrille@cbiot.fr> wrote:
> Hi
> I've got a problem with a broadcom 4312 [12e4:4315].
> The environment :
> ===========================
> uname -a
> 2.6.35.5-libre.29.fc14.x86_64
>
> lspci -vnn
> 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
> ? ? ? ?Subsystem: Dell Wireless 1395 WLAN Mini-Card [1028:000b]
> ? ? ? ?Flags: bus master, fast devsel, latency 0, IRQ 17
> ? ? ? ?Memory at fe7fc000 (64-bit, non-prefetchable) [size=16K]
> ? ? ? ?Capabilities: [40] Power Management version 3
> ? ? ? ?Capabilities: [58] Vendor Specific Information: Len=78 <?>
> ? ? ? ?Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
> ? ? ? ?Capabilities: [d0] Express Endpoint, MSI 00
> ? ? ? ?Capabilities: [100] Advanced Error Reporting
> ? ? ? ?Capabilities: [13c] Virtual Channel
> ? ? ? ?Capabilities: [160] Device Serial Number 7f-78-4e-ff-ff-6d-00-23
> ? ? ? ?Capabilities: [16c] Power Budgeting <?>
> ? ? ? ?Kernel driver in use: b43-pci-bridge
> ? ? ? ?Kernel modules: ssb
> ===============================
>
> Installation method ( http://wireless.kernel.org/en/users/Drivers/b43#fw-b43-lp ) :
> You are using the b43 driver from linux-2.6.25 or newer
> export FIRMWARE_INSTALL_DIR="/lib/firmware"
> wget http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2
> tar xjf broadcom-wl-4.150.10.5.tar.bz2
> cd broadcom-wl-4.150.10.5/driver
> sudo ../../b43-fwcutter-013/b43-fwcutter -w "$FIRMWARE_INSTALL_DIR" wl_apsta_mimo.o
You are using the firmware for G-PHYs. Yo should use v4.174 (also
known as v4.178) for LP-PHY.
>
>
> Seems work : ls /lib/firmware/b43-open/
> a0g0bsinitvals5.fw ? a0g1bsinitvals9.fw ? b0g0bsinitvals9.fw ?lp0bsinitvals15.fw ?n0initvals11.fw ?ucode5.fw
> a0g0bsinitvals9.fw ? a0g1initvals13.fw ? ?b0g0initvals13.fw ? lp0initvals13.fw ? ?pcm5.fw ? ? ? ? ?ucode9.fw
> a0g0initvals5.fw ? ? a0g1initvals5.fw ? ? b0g0initvals5.fw ? ?lp0initvals14.fw ? ?ucode11.fw
> a0g0initvals9.fw ? ? a0g1initvals9.fw ? ? b0g0initvals9.fw ? ?lp0initvals15.fw ? ?ucode13.fw
> a0g1bsinitvals13.fw ?b0g0bsinitvals13.fw ?lp0bsinitvals13.fw ?n0absinitvals11.fw ?ucode14.fw
> a0g1bsinitvals5.fw ? b0g0bsinitvals5.fw ? lp0bsinitvals14.fw ?n0bsinitvals11.fw ? ucode15.fw
Extract to /lib/firmware/b43. /lib/firmware/b43-open is only for OpenFWWF.
>
>
> But :
> dmesg
> b43-phy3 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
> b43-phy4: Broadcom 4312 WLAN found (core revision 15)
> b43-phy4 debug: Found PHY: Analog 6, Type 5, Revision 1
> b43-phy4 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
> phy4: Selected rate control algorithm 'minstrel'
> Registered led device: b43-phy4::tx
> Registered led device: b43-phy4::rx
> Registered led device: b43-phy4::radio
> Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
> ssb0:0: Missing Free firmware
> b43-phy4 ERROR: Rejected non-Free firmware
> ssb0:0: Missing Free firmware
> b43-phy4 ERROR: Rejected non-Free firmware
Compile compat-wireless to bypass the "free-only" patch in Fedora.
(John, are you still maintaining the Fedora kernel's wireless part? If
so, please kill this "freedom enforcement"!)
>
>
> So don't work.
> Grrrrrrrrrrrrrrrrrrrr
> I thought nevertheless that with this kernel that was going to work.
> No idea, I thing is due of the model [12e4:4315]. Is there anyone who can say to me if it possible to install and configure this card with a free-kernel.
>
> Thanx !
>
> Cyrille
>
>
>
> ----
> [ cyrille at cbiot.fr | http://cbiot.fr ]
>
> "Et le combat cessa faute de combattants."
> --- Le Cid (1636), IV, 3, Rodrigue - - - -
>
> BLAG : http://blagblagblag.org
> Blag'em up! http://zenblagger.org
>
>
>
> _______________________________________________
> b43-dev mailing list
> b43-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/b43-dev
>
--
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
next prev parent reply other threads:[~2010-09-24 17:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-24 16:55 problem with b43 Cyrille
2010-09-24 17:06 ` Gábor Stefanik [this message]
2010-09-24 17:21 ` John W. Linville
2010-09-24 17:30 ` Gábor Stefanik
2010-09-24 17:43 ` Michael Büsch
2010-09-24 17:39 ` Cyrille
2010-09-24 17:10 ` Rafał Miłecki
[not found] ` <20100924191547.59c58e7b.cyrille@cbiot.fr>
2010-09-24 17:28 ` Rafał Miłecki
2010-09-24 17:32 ` Cyrille
2010-09-24 17:46 ` Rafał Miłecki
2010-09-24 18:32 ` Cyrille
2010-09-24 18:39 ` Peter Stuge
2010-09-24 19:28 ` Nicolas de Pesloüan
-- strict thread matches above, loose matches on Subject: below --
2010-05-31 21:45 Problem " Fabrizio Regalli
2010-06-01 2:17 ` William Bourque
2010-06-01 8:39 ` Martino Salvetti
2010-06-20 12:04 ` Fabrizio Regalli
2010-06-20 18:12 ` Gábor Stefanik
[not found] ` <AANLkTimpDoxIjIBVOPug5uLADaV5oX6RX8se9VC1x6Pd@mail.gmail.com>
2010-06-21 23:22 ` Gábor Stefanik
2010-06-22 15:09 ` Larry Finger
2010-06-22 18:54 ` Fabrizio Regalli
2010-06-22 19:46 ` Larry Finger
2010-06-22 20:40 ` Fabrizio Regalli
2010-06-24 21:50 ` Fabrizio Regalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTik5QPw6K_CFQW-5qH3PhyDAguqe51AcNaDMOUqt@mail.gmail.com \
--to=netrolller.3d@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=cyrille@cbiot.fr \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).