From: Fabrizio Regalli <fabreg@gmail.com>
To: b43-dev@lists.infradead.org
Subject: Problem with b43
Date: Sun, 20 Jun 2010 14:04:17 +0200 [thread overview]
Message-ID: <AANLkTimCtaUkpeFF0NIEzuSSWVIcMmbVMaSAVlBGhphD@mail.gmail.com> (raw)
In-Reply-To: <AANLkTinKC4wz1tcKcATNOPTrDcuVFyfV83RYYwQfjC9k@mail.gmail.com>
I'm trying with an oldest firmware revision but unfortunately, nothing
changed.
debiancasa:/home/rizla# dmesg |grep b43
[ 2.054445] b43-pci-bridge 0000:04:05.0: PCI INT A -> GSI 17 (level, low)
-> IRQ 17
[ 8.338798] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 8.380033] b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
[ 8.380054] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050,
Revision 8
[ 8.577430] Registered led device: b43-phy0::tx
[ 8.577443] Registered led device: b43-phy0::rx
[ 8.577455] Registered led device: b43-phy0::assoc
[ 8.577470] Registered led device: b43-phy0::radio
[ 10.844287] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 10.924217] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 10.940552] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 10.966269] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 11.084276] b43-phy0: Loading firmware version 410.2160 (2007-05-26
15:32:10)
[ 11.104055] b43-phy0 debug: Chip initialized
[ 11.104096] b43-phy0 debug: PIO initialized
[ 11.104106] b43-phy0 debug: QoS disabled
[ 11.124366] b43-phy0 debug: Wireless interface started
[ 11.148853] b43-phy0 debug: Adding Interface type 2
[ 660.376274] b43-phy0 debug: Removing Interface type 2
[ 660.376359] b43-phy0 debug: Wireless interface stopped
[ 667.296079] b43-phy0: Loading firmware version 410.2160 (2007-05-26
15:32:10)
[ 667.312082] b43-phy0 debug: Chip initialized
[ 667.312122] b43-phy0 debug: PIO initialized
[ 667.312132] b43-phy0 debug: QoS disabled
[ 667.333144] b43-phy0 debug: Wireless interface started
[ 667.356357] b43-phy0 debug: Adding Interface type 2
[ 667.472274] b43-phy0 debug: Removing Interface type 2
[ 667.472356] b43-phy0 debug: Wireless interface stopped
[ 669.584280] b43-phy0: Loading firmware version 410.2160 (2007-05-26
15:32:10)
[ 669.600093] b43-phy0 debug: Chip initialized
[ 669.600134] b43-phy0 debug: PIO initialized
[ 669.600143] b43-phy0 debug: QoS disabled
[ 669.620645] b43-phy0 debug: Wireless interface started
[ 669.644096] b43-phy0 debug: Adding Interface type 2
and in /var/log/messages a lot of this messages:
[ 1022.268919] wlan0: RX AssocResp from 00:18:4d:2e:85:4a (capab=0x431
status=0 aid=1)
[ 1022.268923] wlan0: associated
[ 1022.269690] wlan0: deauthenticating from 00:18:4d:2e:85:4a by local
choice (reason=3)
[ 1022.269826] cfg80211: Calling CRDA to update world regulatory domain
[ 1023.600719] wlan0: authenticate with 00:18:4d:2e:85:4a (try 1)
[ 1023.664562] wlan0: authenticated
[ 1023.664687] wlan0: associate with 00:18:4d:2e:85:4a (try 1)
[ 1023.864521] wlan0: associate with 00:18:4d:2e:85:4a (try 2)
[ 1024.064534] wlan0: associate with 00:18:4d:2e:85:4a (try 3)
[ 1024.264024] wlan0: association with 00:18:4d:2e:85:4a timed out
[ 1034.841535] wlan0: authenticate with 00:18:4d:2e:85:4a (try 1)
[ 1035.040024] wlan0: authenticate with 00:18:4d:2e:85:4a (try 2)
[ 1035.240023] wlan0: authenticate with 00:18:4d:2e:85:4a (try 3)
[ 1035.440035] wlan0: authentication with 00:18:4d:2e:85:4a timed out
2010/6/1 Martino Salvetti <the9ull@silix.org>
> Also me... I sent a message about this problem but it was blocked.
>
> I have this problem olny with multi-AP networks, in dmesg I can see that it
> continue to changes the AP until they ends to responds. (At my home, with a
> digicom ADSL router, the wifi works)
>
> Martino
>
> 2010/6/1 William Bourque <william.bourque@polymtl.ca>
>
>
>> Just saying, I have a similar problem... I tried to post twice about it
>> on the list since 2 weeks but the mails keep getting moderated (and
>> never unmoderated) because of "suspicious content".
>>
>> - William
>>
>> _______________________________________________
>> b43-dev mailing list
>> b43-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/b43-dev
>>
>
>
>
> --
> Remember: with great power comes great current squared times resistance.
>
> _______________________________________________
> b43-dev mailing list
> b43-dev at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/b43-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/b43-dev/attachments/20100620/fb5a8cac/attachment-0001.html>
next prev parent reply other threads:[~2010-06-20 12:04 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-31 21:45 Problem with b43 Fabrizio Regalli
2010-06-01 2:17 ` William Bourque
2010-06-01 8:39 ` Martino Salvetti
2010-06-20 12:04 ` Fabrizio Regalli [this message]
2010-06-20 18:12 ` Gábor Stefanik
[not found] ` <AANLkTimpDoxIjIBVOPug5uLADaV5oX6RX8se9VC1x6Pd@mail.gmail.com>
2010-06-21 23:22 ` Gábor Stefanik
2010-06-22 15:09 ` Larry Finger
2010-06-22 18:54 ` Fabrizio Regalli
2010-06-22 19:46 ` Larry Finger
2010-06-22 20:40 ` Fabrizio Regalli
2010-06-24 21:50 ` Fabrizio Regalli
-- strict thread matches above, loose matches on Subject: below --
2010-09-24 16:55 problem " Cyrille
2010-09-24 17:06 ` Gábor Stefanik
2010-09-24 17:21 ` John W. Linville
2010-09-24 17:30 ` Gábor Stefanik
2010-09-24 17:43 ` Michael Büsch
2010-09-24 17:39 ` Cyrille
2010-09-24 17:10 ` Rafał Miłecki
[not found] ` <20100924191547.59c58e7b.cyrille@cbiot.fr>
2010-09-24 17:28 ` Rafał Miłecki
2010-09-24 17:32 ` Cyrille
2010-09-24 17:46 ` Rafał Miłecki
2010-09-24 18:32 ` Cyrille
2010-09-24 18:39 ` Peter Stuge
2010-09-24 19:28 ` Nicolas de Pesloüan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTimCtaUkpeFF0NIEzuSSWVIcMmbVMaSAVlBGhphD@mail.gmail.com \
--to=fabreg@gmail.com \
--cc=b43-dev@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).