From mboxrd@z Thu Jan 1 00:00:00 1970 From: chris at martin.cc Date: Thu, 3 Mar 2011 15:43:25 +1100 Subject: Switching to 4.174.64.19 firmware for G-PHY cards? In-Reply-To: <4D6EBDE0.8020005@lwfinger.net> References: <4CFE538A.10808@lwfinger.net> <4CFE8934.4060803@hauke-m.de> <4D6EBDE0.8020005@lwfinger.net> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: b43-dev@lists.infradead.org On Thu, Mar 3, 2011 at 9:00 AM, Larry Finger wrote: > On 03/02/2011 06:20 AM, chris at martin.cc wrote: >> > This problem is getting more and more curious. > > I have two systems with 14e4:4315 LP PHY cards. One is x86_64 and the other > is i386. I added kmemleak checking to each and have been running networking > for about 3 hours on the 64-bit system, and 18 hours for 32 bit. Neither > shows any memory leaks associated with b43. Both are using 508.1084 > firmware. Most of the tests were in STA mode, but a few minutes with one > hosting an AP for the other has not shown any leaks. I configured it to run in Client(STA) mode and I still has the same problem. However I did get a little more information root at OpenWrt:/etc/config# wifi up Error for wireless request "Set Power Management" (8B2C) : SET failed on device wlan0 ; Operation not supported. compat-wireless-2011-02-25/drivers/net/wireless/b43/main.c:2262 kzalloc 332 bytes b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) compat-wireless-2011-02-25/drivers/net/wireless/b43/dma.c:824 kzalloc 96 bytes compat-wireless-2011-02-25/drivers/net/wireless/b43/dma.c:824 kzalloc 96 bytes compat-wireless-2011-02-25/drivers/net/wireless/b43/dma.c:824 kzalloc 96 bytes compat-wireless-2011-02-25/drivers/net/wireless/b43/dma.c:824 kzalloc 96 bytes compat-wireless-2011-02-25/drivers/net/wireless/b43/dma.c:824 kzalloc 96 bytes compat-wireless-2011-02-25/drivers/net/wireless/b43/dma.c:824 kzalloc 96 bytes b43-phy0 ERROR: PHY transmission error b43-phy0 ERROR: PHY transmission error b43-phy0 ERROR: PHY transmission error b43-phy0 ERROR: PHY transmission error b43-phy0 ERROR: PHY transmission error ---------------------------------------------------------- Chris Martin m: +61 419 812 371 ----------------------------------------------------------