From: "Rafał Miłecki" <zajec5@gmail.com>
To: b43-dev@lists.infradead.org
Subject: Interesting 14e4:4321
Date: Sat, 7 May 2011 11:41:21 +0200 [thread overview]
Message-ID: <BANLkTikfgZ8Kn-DVtN3umFv9FFEaTspPiw@mail.gmail.com> (raw)
In-Reply-To: <274308290.20110507111432@googlemail.com>
Swen, really, include ML in your "to". It's second time.
---------- Wiadomo?? przekazana dalej ----------
Od: Swen Weiland <swen.weiland@googlemail.com>
Data: 7 maja 2011 11:14
Temat: Re: Fwd: Interesting 14e4:4321
Do: Rafa? Mi?ecki <zajec5@gmail.com>
DW: Hauke Mehrtens <hauke@hauke-m.de>
Today I did some more detailed testing an I have to clarify what works
and what not.
The device does not work with DMA (currently), PIO mode is required.
With PIO mode:
"iwlist wlan0 scan" works and networks are reported.
Signal strength in the report does not work.
It is always:
?Quality=70/70 ?Signal level=0 dBm
Associate with with AP seems to work but no data transfer
b43-phy1: Broadcom 4321 WLAN found (core revision 12)
b43-phy1 debug: Found PHY: Analog 5, Type 4, Revision 2
b43-phy1 debug: Found Radio: Manuf 0x17F, Version 0x2055, Revision 4
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy1::tx
Registered led device: b43-phy1::rx
Broadcom 43xx driver loaded [ Features: PNL, GPIO LED Mask: 0x000f,
Firmware-ID: FW13 ]
b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10)
b43-phy1 debug: Chip initialized
b43-phy1 debug: PIO initialized
b43-phy1 debug: QoS enabled
b43-phy1 debug: Wireless interface started
b43-phy1 debug: Adding Interface type 2
wlan0: authenticate with 68:7f:74:06:b8:e8 (try 1)
wlan0: authenticated
wlan0: associate with 68:7f:74:06:b8:e8 (try 1)
wlan0: RX AssocResp from 68:7f:74:06:b8:e8 (capab=0x401 status=0 aid=1)
wlan0: associated
ieee80211 phy1: wlan0: No probe response from AP 68:7f:74:06:b8:e8
after 500ms, disconnecting.
Managed mode can be set and the AP is visible.
Connecting to it is not possible and the device stops working with:
b43-phy1: Loading firmware version 410.2160 (2007-05-26 15:32:10)
b43-phy1 debug: Chip initialized
b43-phy1 debug: PIO initialized
b43-phy1 debug: QoS enabled
b43-phy1 debug: Wireless interface started
device wlan0 entered promiscuous mode
b43-phy1 debug: Adding Interface type 3
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering forwarding state
b43-phy1 debug: Set beacon interval to 100
b43-phy1 debug: Updated beacon template at 0x68
b43-phy1 debug: Updated beacon template at 0x468
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
br-lan: port 2(wlan0) entering forwarding state
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
NOHZ: local_softirq_pending 08
--
Mit freundlichen Gr??en
Swen Weiland
next prev parent reply other threads:[~2011-05-07 9:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-06 20:40 Interesting 14e4:4321 Rafał Miłecki
2011-05-06 21:28 ` Larry Finger
2011-05-06 21:48 ` Rafał Miłecki
2011-05-06 22:25 ` Larry Finger
2011-05-06 21:36 ` Hauke Mehrtens
2011-05-06 21:51 ` Rafał Miłecki
[not found] ` <479014597.20110507002540@googlemail.com>
[not found] ` <BANLkTi=n6gjDxGX0buUamNQAydPCMqEpjg@mail.gmail.com>
[not found] ` <274308290.20110507111432@googlemail.com>
2011-05-07 9:41 ` Rafał Miłecki [this message]
2011-05-06 21:56 ` Jonas Gorski
2011-05-06 22:14 ` Rafał Miłecki
2011-05-06 22:32 ` Jonas Gorski
2011-05-07 15:17 ` Michael Büsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BANLkTikfgZ8Kn-DVtN3umFv9FFEaTspPiw@mail.gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox