From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= Date: Wed, 8 Jun 2011 22:25:34 +0200 Subject: Faulty 14e4:4315 (BCM4312)? Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: b43-dev@lists.infradead.org Hey, I've just discovered I can not connect with my 14e4:4315 to my home network. dmesg: [ 119.744050] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 119.746744] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz. [ 121.130067] b43-phy0 debug: Chip initialized [ 121.130348] b43-phy0 debug: 64-bit DMA initialized [ 121.130416] b43-phy0 debug: QoS enabled [ 121.139857] b43-phy0 debug: Wireless interface started [ 121.145095] b43-phy0 debug: Adding Interface type 2 [ 121.145605] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 128.295371] wlan0: authenticate with 00:23:69:c2:65:06 (try 1) [ 128.300285] wlan0: authenticated [ 128.300319] wlan0: associate with 00:23:69:c2:65:06 (try 1) [ 128.303709] wlan0: RX AssocResp from 00:23:69:c2:65:06 (capab=0x411 status=0 aid=3) [ 128.303715] wlan0: associated [ 128.304711] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 128.429557] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:23:69:c2:65:06 [ 128.429611] b43-phy0 debug: Using hardware based encryption for keyidx: 2, mac: ff:ff:ff:ff:ff:ff [ 132.208036] ieee80211 phy0: wlan0: No probe response from AP 00:23:69:c2:65:06 after 500ms, disconnecting. wpa_supplicant fills my console with: > ioctl[SIOCSIWENCODEEXT]: Invalid argument > ioctl[SIOCSIWENCODEEXT]: Invalid argument > Trying to associate with 00:23:69:c2:65:06 (SSID='zajec_poznan_160' freq=2427 MHz) > Associated with 00:23:69:c2:65:06 > WPA: Key negotiation completed with 00:23:69:c2:65:06 [PTK=CCMP GTK=CCMP] > CTRL-EVENT-CONNECTED - Connection to 00:23:69:c2:65:06 completed (auth) [id=0 id_str=] > CTRL-EVENT-DISCONNECTED bssid=00:23:69:c2:65:06 reason=0 It seems it was already reported, for example in: "No probe response from AP
after 500ms, disconnecting." by Miklos Vajna on Thu, 14 Jan 2010 17:29:20 -0800. http://www.mail-archive.com/bcm43xx-dev at lists.berlios.de/msg09481.html What's really surprising I can not connect to this network also when using wl 5.100.82.38! Did anyone of you already got some faulty BCM4312 hardware? Did it behave like this? I'm surprised than scanning works, but connection is quickly dropped. It does not really sound like a faulty hardware. Of course I'll experiment with this more, for now just early-asking. -- Rafa?