b43-dev.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: b43-dev@lists.infradead.org
Subject: BCM5354 (Asus WL500GPv2) DMA RX buffer too small and skb_over_panic
Date: Sun, 29 May 2011 13:35:15 +0200	[thread overview]
Message-ID: <BANLkTinZA=fOLGnoCQ-1-4ng1GKAv5_5gA@mail.gmail.com> (raw)
In-Reply-To: <4DE22C0E.1050902@hauke-m.de>

Hey,

W dniu 29 maja 2011 13:20 u?ytkownik Hauke Mehrtens <hauke@hauke-m.de> napisa?:
> Hi Rafa?,
>
> I got some bug reports [0] in OpenWrt regarding a kernel panic because
> of b43. It occurs on BCM5354 devices, when they are in AP mode.
>
> There was also a discussion about this on this mailing list some years
> ago. [1]
>
> It happens after some time ( 3h to 2d ) without any load or anything not
> normal, in station mode this panic does not occur.
> After the error occurred the CPU usage increases to 3.0 - 5.0
> Sometimes "b43-phy0 ERROR: MAC suspend failed" is shown in the log
> before this panic.
>
> Rafa? could you please have a look at the issue?
>
> ------
> Hauke
>
> [0]: https://dev.openwrt.org/ticket/9459
> [1]: http://permalink.gmane.org/gmane.linux.drivers.bcm54xx.devel/10682
>
>
>
> Kernel panic:
>
> b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
> b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
> ......
> b43-phy0 ERROR: DMA RX buffer too small (len: 42390, buffer: 2352,
> nr-dropped: 19)
> b43-phy0 ERROR: DMA RX buffer too small (len: 25505, buffer: 2352,
> nr-dropped: 11)
> b43-phy0 ERROR: DMA RX buffer too small (len: 19022, buffer: 2352,
> nr-dropped: 9)
> b43-phy0 ERROR: DMA RX buffer too small (len: 4189, buffer: 2352,
> nr-dropped: 2)
> b43-phy0 ERROR: DMA RX buffer too small (len: 37381, buffer: 2352,
> nr-dropped: 16)
> skb_over_panic: text:80c9a408 len:2378 put:2378 head:80eef000
> data:80eef040 tail:0x80eef98a end:0x80eef980 dev:<NULL>
> Kernel bug detected[#1]:
> Cpu 0
> $ 0 ? : 00000000 1000b800 0000007c 00000001
> $ 4 ? : 80293498 000020ed ffffffff 000020ed
> $ 8 ? : 00004000 00000000 00000001 ffffffff
> $12 ? : 0000000f 80253c78 ffffffff 00000000
> $16 ? : 00eef040 0000092c 80eef040 819e0740
> $20 ? : 81b3cb00 0000001e a1b4a1e0 80c9f978
> $24 ? : 00000002 80166250
> $28 ? : 81a46000 81a47db0 00000020 801a3d24
> Hi ? ?: 00000000
> Lo ? ?: 00000077
> epc ? : 801a3d24 0x801a3d24
> ? ?Not tainted
> ra ? ?: 801a3d24 0x801a3d24
> Status: 1000b803 ? ?KERNEL EXL IE
> Cause : 00800024
> PrId ?: 00029029 (Broadcom BCM3302)
> Modules linked in: xt_IMQ nf_nat_tftp nf_conntrack_tftp nf_nat_irc
> nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_HL xt_hl xt_MARK ipt_ECN
> xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn
> xt_DSCP xt_dscp xt_string xt_layer7 ipt_MASQUERADE iptable_nat nf_nat
> xt_CONNMARK xt_recent xt_helper xt_conntrack xt_connmark xt_connbytes
> xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4
> nf_conntrack pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment
> xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables
> xt_tcpudp x_tables ppp_async ppp_generic slhc b43legacy sch_red b43
> sch_sfq sch_hfsc cls_fw imq mac80211 ts_fsm ts_bm ts_kmp crc_ccitt
> cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc
> switch_robo switch_core diag
> Process irq/5-b43 (pid: 895, threadinfo=81a46000, task=81ab45d0,
> tls=00000000)
> Stack : 00000000 80c9a408 0000094a 0000094a 80eef000 80eef040 80eef98a
> 80eef980
> ? ? ? ?8026e09c 0000001e a1b4a1e0 80c9a408 80c17ad4 00ff0000 000000e6
> 00010000
> ? ? ? ?819e2400 819e2400 80d31568 00ff0000 80c9f978 00010000 00010000
> 819e2400
> ? ? ? ?00008000 00010000 81b3ca24 00010000 802ce8c0 00000000 802953b4
> 80c872cc
> ? ? ? ?00010000 802ce8c0 80292f28 8001ce0c 819ea138 819ea138 80292f28
> 8001eba0
> ? ? ? ?...
> Call Trace:[<80c9a408>] 0x80c9a408
> [<80c9a408>] 0x80c9a408
> [<80c872cc>] 0x80c872cc
> [<8001ce0c>] 0x8001ce0c
> [<8001eba0>] 0x8001eba0
> [<8001cef8>] 0x8001cef8
> [<80190bf4>] 0x80190bf4
> [<80c87424>] 0x80c87424
> [<80057480>] 0x80057480
> [<8000af98>] 0x8000af98
> [<80057304>] 0x80057304
> [<80057304>] 0x80057304
> [<8003db30>] 0x8003db30
> [<8000f86c>] 0x8000f86c
> [<8003dab4>] 0x8003dab4
> [<8000f85c>] 0x8000f85c
>
>
> Code: afab001c ?0c0028ff ?afa20020 <0200000d> 08068f4a ?00000000
> 8fbf002c ?01201021 ?03e00008
> Disabling lock debugging due to kernel taint
> exiting task "irq/5-b43" (895) is an active IRQ thread (irq 5)
>
>
> Call Trace from an other report:
>
> Jan ?1 04:03:40 OpenWrt user.warn kernel: Call Trace:
> Jan ?1 04:03:40 OpenWrt user.warn kernel: [<8019bc10>] skb_put+0x74/0x90
> Jan ?1 04:03:40 OpenWrt user.warn kernel: [<8051a3e8>]
> b43_dma_rx+0x294/0x378 [b43]
> Jan ?1 04:03:40 OpenWrt user.warn kernel: [<805072b8>]
> b43_controller_restart+0x7a8/0x97c [b43]
> Jan ?1 04:03:40 OpenWrt user.warn kernel: Code: afab001c ?0c0028c2
> afa20020 <0200000d> 08066f05 ?00000000 ?8fbf002c ?01201021 ?03e00008
> Jan ?1 04:03:40 OpenWrt user.warn kernel: Disabling lock debugging due
> to kernel taint
> Jan ?1 04:03:40 OpenWrt user.err kernel: exiting task "irq/5-b43" (763)
> is an active IRQ thread (irq 5)

This sounds like duplicate of:
https://bugzilla.kernel.org/show_bug.cgi?id=32042

Larry fixed this issue, also CC-ing stable at kernel. I believe updating
kernel or applying c85ce65ecac078ab1a1835c87c4a6319cf74660a manually
will help :)

-- 
Rafa?

  reply	other threads:[~2011-05-29 11:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-29 11:20 BCM5354 (Asus WL500GPv2) DMA RX buffer too small and skb_over_panic Hauke Mehrtens
2011-05-29 11:35 ` Rafał Miłecki [this message]
2011-05-29 14:39   ` Larry Finger
2011-05-30  9:26     ` Rafał Miłecki
2011-05-30 13:01       ` chris at martin.cc
2011-05-31 11:55         ` Rafał Miłecki
     [not found]           ` <BANLkTikNJKcUfXREYiYTx2E1Ba=E95=3VQ@mail.gmail.com>
2011-05-31 13:26             ` chris at martin.cc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='BANLkTinZA=fOLGnoCQ-1-4ng1GKAv5_5gA@mail.gmail.com' \
    --to=zajec5@gmail.com \
    --cc=b43-dev@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).