From mboxrd@z Thu Jan  1 00:00:00 1970
From: Thommy Jakobsson <thommyj@gmail.com>
Date: Sun, 5 May 2013 21:59:53 +0200 (CEST)
Subject: [PATCH] B43: Handle DMA RX descriptor underrun
In-Reply-To: <CACna6rz+PsN1GyniJL7JZJmb7T6Fnk_g101M8DeePr29LsAXaA@mail.gmail.com>
References: <alpine.DEB.2.02.1304231851040.1513@kelly.ryd.net>
 <CACna6rxWPOqQPNUaASaj=v=O+Wjt0okjX4jNwE3tv-=etfATCg@mail.gmail.com>
 <CACna6rwk0akD0x+sWTmjDDoaQqF0Y=NQ58rzqgZH92GCug6CeQ@mail.gmail.com>
 <CACna6ry+F45PhCXahPpJtzu-w+vLE29ksHo9njXfTcfY3Av6LA@mail.gmail.com>
 <20130505192405.0cf4350e@milhouse>
 <CACna6rz+PsN1GyniJL7JZJmb7T6Fnk_g101M8DeePr29LsAXaA@mail.gmail.com>
Message-ID: <alpine.DEB.2.02.1305052153410.1469@kelly.ryd.net>
List-Id: <b43-dev.lists.infradead.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: =?ISO-8859-2?Q?Rafa=B3_Mi=B3ecki?= <zajec5@gmail.com>
Cc: =?ISO-8859-15?Q?Michael_B=FCsch?= <m@bues.ch>, linville@tuxdriver.com, linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org, piotras@gmail.com, Larry.Finger@lwfinger.net



On Sun, 5 May 2013, Rafa? Mi?ecki wrote:

> 2013/5/5 Michael B?sch <m@bues.ch>:
> > On Sun, 5 May 2013 18:31:20 +0200
> > Rafa? Mi?ecki <zajec5@gmail.com> wrote:
> >
> >> Still worth considering is my previous e-mail. Why writing (for
> >> example) 1 to RXSTOPINDEX doesn't stop firmware from using slot 1?
> >
> > What makes you think this register does not work?
> 
> Take a look at this:
> 
> [  327.224976] [DBG] old current:5      new current:6
> [  327.224982] [DBG] reading slot 5
> [  327.224997] [DBG] writing stop slot 6
> 
> In above ring->slot was 5, but IRQ was generated, and we read new
> "current" using get_current_rxslot. It appeared to be 6. So we read
> packet from slot 5 and then called
> ops->set_current_rxslot(ring, 6);
> AFAIU hardware shouldn't use slot 6, right? But take a look at what
> happens next:
> 
> [  327.319582] [DBG] old current:6      new current:7
> [  327.319590] [DBG] reading slot 6
> [  327.319619] [DBG] writing stop slot 7
> 
> Hardware generated IRQ and we get_current_rxslot returned 7. It means
> we're allowed to read slots up to 7 (excluding). It other words it
> means firmware used slot 6... but 100ms earlier we forbid firmware to
> use slot 6!
> 
> This is part I don't understand. It looks like firmware ignores what
> we set with the ops->set_current_rxslot
As I wrote before, you cannot remove a slot that the device already marked 
as next. The register that you write to with set_current_rxslot is only 
checked when the firmware steps up the current descriptor register. At 
least thats what I have seen from my testing.

//Thommy