From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?KOI8-R?B?59LJx8/Sycog5tXexcTWyQ==?= Date: Sat, 24 Apr 2010 01:05:01 +0300 Subject: [14e4:4315] Dell Studio 1735, rfkill problem Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: b43-dev@lists.infradead.org Hi, I have 14e4:4315 on my Dell Studio 1735, I'm running gentoo with 2.6.33.2 kernel and b43-firmware-4.150.10.5. Driver works great but I have problem with rfkill. I had enabled rfkill in my kernel > $ grep RFKILL /usr/src/linux/.config > CONFIG_RFKILL=y > CONFIG_RFKILL_LEDS=y > CONFIG_RFKILL_INPUT=y > # CONFIG_TOSHIBA_BT_RFKILL is not set My laptop has 2-positional hardware switch for wifi, when I toggle it off. I get following in dmesg: > b43-phy0: Radio hardware status changed to DISABLED > wlan0: deauthenticating from 00:23:69:2f:3f:01 by local choice (reason=3) > b43-phy0: Radio turned on by software > b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. Also wifi led turns off. Then I turn it back on and get: > b43-phy0: Radio hardware status changed to ENABLED But wifi remains non-functional until I reboot. Wifi led is turned off until I reboot also. If turn switch on/off several times I get: > b43-phy0: Radio hardware status changed to DISABLED > b43-phy0: Radio hardware status changed to ENABLED > b43-phy0: Radio hardware status changed to DISABLED > b43-phy0: Radio hardware status changed to ENABLED But wifi still is not working. -- Grygoriy Fuchedzhy -------------- next part -------------- An HTML attachment was scrubbed... URL: