* FW: [Fwd: Re: [B.A.T.M.A.N.] B.A.T.M.A.N. läuft jetzt auch permanent auf der Zwingli-Nordost - 105.130.1.67]
@ 2007-01-09 12:58 Lui
0 siblings, 0 replies; only message in thread
From: Lui @ 2007-01-09 12:58 UTC (permalink / raw)
To: B.A.T.M.A.N.-ML
[-- Attachment #1: Type: text/plain, Size: 8167 bytes --]
Hallo Liste ;-)
na dann dies auch gleich hier...
Lui
>-----Original Message-----
>From: Ludger Schmudde [mailto:Lui@Schmudde.com]
>Sent: Montag, 8. Januar 2007 22:52
>To: 'elektra'
>Cc: 'Marek Lindner'
>Subject: RE: [Fwd: Re: [B.A.T.M.A.N.] B.A.T.M.A.N. läuft jetzt
>auch permanent auf der Zwingli-Nordost - 105.130.1.67]
>
>elektra,
>
>(ahh, Info hast'e ja schon)
>>>> * Beim WLAN-Routing wählt BATMAN tendenziell den (schlechern?)
>>>> direkten (1-Hop) Weg.
>>>> [...]
>
>>habe Ich das richtig verstanden - BATMAN wählt von 3 direkten
>>Linkstrecken ohne Zwischenhop die schlechtere?
>
>Ja:
>_3.PharusEmmaus
>WLAN-IP: LAN-IP: 2007.01.08-19:51:25
>105.192.192.66 105.192.192.83
>_______________ _______________ __________________________
>105.0.0.0 0.0.0.0 ---.0.0.0 U eth1
>105.130.30.1 105.192.192.87 ---.---.---.--- UGH br0
>105.192.192.1 105.192.192.81 ---.---.---.--- UGH br0
>105.192.192.133 105.192.192.85 ---.---.---.--- UGH br0
>105.192.192.166 105.192.192.86 ---.---.---.--- UGH br0
>105.192.192.199 105.192.192.87 ---.---.---.--- UGH br0
>105.192.192.225 105.192.192.88 ---.---.---.--- UGH eth1 [1]
>105.192.192.33 105.192.192.82 ---.---.---.--- UGH br0
>105.192.192.80 0.0.0.0 ---.---.---.240 U br0
>105.192.192.81 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.82 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.84 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.85 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.86 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.87 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.88 0.0.0.0 ---.---.---.--- UH br0
>105.192.192.99 105.192.192.84 ---.---.---.--- UGH br0
>105.192.99.103 105.192.99.192 ---.---.---.--- UGH eth1 [3]
>105.192.99.150 105.192.99.192 ---.---.---.--- UGH eth1 [3]
>105.192.99.192 0.0.0.0 ---.---.---.--- UH eth1 [3]
>105.192.99.50 105.192.99.192 ---.---.---.--- UGH eth1
>xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx xxxx [2]
>
>[1] ??? via eth1(/WLAN) auf die LAN-IP des direkt via LAN
> erreichbaren Nachbarn ???
>[2] hier fehlt noch etwas wie:
>105.192.99.160 105.192.192.84 ---.---.---.--- UH br0
>105.192.99.60 105.192.192.84 ---.---.---.--- UGH br0
>
>[3] = da wäre (s.o.) ein "via 105.192.192.84" (2-Hops) besser...
>siehe - Vergleich 105../104...:
>
>root@_3:~# ping 105.192.99.192
>PING 105.192.99.192 (105.192.99.192): 56 data bytes
>64 bytes from 105.192.99.192: icmp_seq=1 ttl=63 time=32.5 ms
>64 bytes from 105.192.99.192: icmp_seq=2 ttl=63 time=43.4 ms
>64 bytes from 105.192.99.192: icmp_seq=3 ttl=63 time=67.2 ms
>64 bytes from 105.192.99.192: icmp_seq=5 ttl=63 time=22.2 ms
>
>--- 105.192.99.192 ping statistics ---
>8 packets transmitted, 4 packets received, 50% packet loss
>round-trip min/avg/max = 22.2/41.3/67.2 ms
>
>root@_3:~# ping 104.192.99.192
>PING 104.192.99.192 (104.192.99.192): 56 data bytes
>64 bytes from 104.192.99.192: icmp_seq=0 ttl=63 time=12.2 ms
>64 bytes from 104.192.99.192: icmp_seq=1 ttl=63 time=11.6 ms
>64 bytes from 104.192.99.192: icmp_seq=2 ttl=63 time=7.0 ms
>64 bytes from 104.192.99.192: icmp_seq=3 ttl=63 time=7.6 ms
>64 bytes from 104.192.99.192: icmp_seq=4 ttl=63 time=7.8 ms
>64 bytes from 104.192.99.192: icmp_seq=5 ttl=63 time=11.6 ms
>
>--- 104.192.99.192 ping statistics ---
>6 packets transmitted, 6 packets received, 0% packet loss
>round-trip min/avg/max = 7.0/9.6/12.2 ms root@_3:~# rt
>
>>Kannst Du mal da Daten drüberjagen und schauen wie sich das mit der
>>Geschwindigkeit verhält?
>>Einfach mal n wget von der 105er und der 104er Adresse aus /dev/zero
>>vielleicht?
>
>Das probiere ich schon länger - die Ergebnisse steuen aber
>derart, daß daraus nichts zu sehen ist außer, das _während_
>eines 10Sek.
>Testtransfers die Routen mehrfach wechseln oder wegbrechen (->Anhang)
>
>...gerade auch entdeckt:
>m99_PharusE
>WLAN-IP: LAN-IP: 2007.01.08-19:54:55
>105.192.99.192 105.192.99.62
>_______________ _______________ __________________________
>105.0.0.0 0.0.0.0 ---.0.0.0 U eth1
>105.130.30.1 105.192.192.66 ---.---.---.--- UGH eth1 [1]
>105.192.192.1 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.133 0.0.0.0 ---.---.---.--- UH eth1
>105.192.192.166 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.199 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.33 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.81 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.82 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.83 105.192.192.66 ---.---.---.--- UGH eth1 [1]
>105.192.192.84 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.85 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.86 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.87 105.192.192.66 ---.---.---.--- UGH eth1 [1]
>105.192.192.88 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.99 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.0 0.0.0.0 ---.---.---.192 U br0
>105.192.99.103 105.192.99.160 ---.---.---.--- UGH eth1
>105.192.99.150 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.160 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.50 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.60 105.192.99.160 ---.---.---.--- UGH eth1
>105.192.99.61 0.0.0.0 ---.---.---.--- UH br0
>
>[1] 3x via 105.192.192.66 aber *dorthin* fehlt die Route!?
>
>[Restart+1h]: m99_PharusE
>WLAN-IP: LAN-IP: 2007.01.08-21:00:25
>105.192.99.192 105.192.99.62
>_______________ _______________ __________________________
>105.0.0.0 0.0.0.0 ---.0.0.0 U eth1
>105.192.192.1 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.133 0.0.0.0 ---.---.---.--- UH eth1
>105.192.192.166 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.199 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.225 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.66 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.81 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.82 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.83 105.192.192.66 ---.---.---.--- UGH eth1 [...]
>105.192.192.85 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.86 105.192.192.133 ---.---.---.--- UGH eth1
>105.192.192.87 105.192.192.66 ---.---.---.--- UGH eth1 [...]
>105.192.192.88 105.192.192.99 ---.---.---.--- UGH eth1
>105.192.192.99 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.0 0.0.0.0 ---.---.---.192 U br0
>105.192.99.103 105.192.99.150 ---.---.---.--- UGH eth1
>105.192.99.150 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.160 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.50 0.0.0.0 ---.---.---.--- UH eth1
>105.192.99.60 105.192.99.160 ---.---.---.--- UGH eth1
>105.192.99.61 0.0.0.0 ---.---.---.--- UH br0
>
>Nun fehlt z.B. das WLAN-IF (.33) von _2 (.82) - und so weiter...
>
>Routing- und Last- /Auffälligkeiten/ sind nicht wirklich
>reproduzierbar...
>
>Auch Dinge wie diese:
>>>> top/%MEM ist (_1 bis _8): 5.0/6.5/12.1(!)/6.6/6.7/4.8/3.0(!)/5.6
>
>ändern sich z.B. beim Restart eines (beliebigen) Knoten u.U.
>komplett...
>
>Das hat offensichtlich nichts mit dem lokalen Code, sondern dem
>Gruppen/Zeit- Verhalten zu tun; sicher sind auch externe
>Einflüsse von Bedeutung. Von meiner Überlegung diese mal
>auszuschließen ("Batman-Only Test") bin ich selbst nicht
>wirklich überzeugt (->Falsche Sicherheit...).
>
>Schon bei einer handvoll von Routern sind via Console/WebUI
>solcherlei Dynamik nicht mehr auseinander zu dröseln - da
>müßten Tools für her...
>
>...irgendwas, das Routing- & Last-Verhalten eines
>Router-Clusters /sichtbar/ machen kann - ohne freilich selbst
>Einfluss zu nehmen.
>
>Sonst ist das irgendwie fischen im Trüben...
>
>Grüße
>Lui
>
[-- Attachment #2: xfer.txt --]
[-- Type: text/plain, Size: 3774 bytes --]
(Anm.: xfertst - macht 8 Sek. DL aus dev-zero und schreibt dann kBit/sek. an die kBytes)
root@m99_PharusE:~# L="104.192.192.66 105.192.192.66 104.192.192.99 105.192.192.99 104.192.192.133 105.192.192.133";for R in $L;do tracert $R;xfertst $R;done
traceroute to 104.192.192.66 (104.192.192.66), 30 hops max, 40 byte packets
1 _5.PharusEmmaus.olsr (104.192.192.133) 20.646 ms 10.067 ms 3.918 ms
2 _3.PharusEmmaus.olsr (104.192.192.66) 6.024 ms 4.497 ms 8.065 ms
........ - done
Transfered Terminated
1863 kBit/sek.
traceroute to 105.192.192.66 (105.192.192.66), 30 hops max, 40 byte packets
1 105.192.192.133 (105.192.192.133) 6.492 ms 6.979 ms 19.052 ms
2 * 105.192.192.66 (105.192.192.66) 17.518 ms 3.883 ms
........ - done
Transfered Terminated
4276 kBit/sek.
traceroute to 104.192.192.99 (104.192.192.99), 30 hops max, 40 byte packets
1 _4.PharusEmmaus.olsr (104.192.192.99) 1004.15 ms 4.63 ms 126.47 ms
........ - done
Transfered Terminated
1691 kBit/sek.
traceroute to 105.192.192.99 (105.192.192.99), 30 hops max, 40 byte packets
1 105.192.192.99 (105.192.192.99) 1108.87 ms 48.213 ms 3.955 ms
........ - done
Transfered Terminated
1994 kBit/sek.
traceroute to 104.192.192.133 (104.192.192.133), 30 hops max, 40 byte packets
1 _5.PharusEmmaus.olsr (104.192.192.133) 4.613 ms 5.653 ms 13.37 ms
........ - done
Transfered Terminated
538 kBit/sek.
traceroute to 105.192.192.133 (105.192.192.133), 30 hops max, 40 byte packets
1 * 105.192.99.62 (105.192.99.62) 1000.56 ms !H *
2 105.192.99.62 (105.192.99.62) 990.649 ms !H * 1000.62 ms !H
...105.192.192.133[105.192.192.133]80 (105.192.192.133)..... - done
Transfered killall: wget: no process killed
kBit/sek.
root@m99_PharusE:~# L="104.192.192.66 105.192.192.66 104.192.192.99 105.192.192.99 104.192.192.133 105.192.192.133";for R in $L;do tracert $R;xfertst $R;done
traceroute to 104.192.192.66 (104.192.192.66), 30 hops max, 40 byte packets
1 _4.PharusEmmaus.olsr (104.192.192.99) 25.353 ms 96.147 ms 31.382 ms
2 _3.PharusEmmaus.olsr (104.192.192.66) 52.573 ms 47.897 ms 33.147 ms
........ - done
Transfered Terminated
2329 kBit/sek.
traceroute to 105.192.192.66 (105.192.192.66), 30 hops max, 40 byte packets
1 105.192.192.84 (105.192.192.84) 51.882 ms 4.282 ms 5.567 ms
2 * 105.192.192.84 (105.192.192.84) 1013.73 ms !H *
3 105.192.192.84 (105.192.192.84) 1019.89 ms !H * *
4 * * *
5 105.192.192.133 (105.192.192.133) 1093.62 ms !H * *
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * 105.192.192.66 (105.192.192.66) 51.21 ms
........ - done
Transfered Terminated
kBit/sek.
traceroute to 104.192.192.99 (104.192.192.99), 30 hops max, 40 byte packets
1 _4.PharusEmmaus.olsr (104.192.192.99) 1004.49 ms 3.904 ms 5.028 ms
........ - done
Transfered Terminated
864 kBit/sek.
traceroute to 105.192.192.99 (105.192.192.99), 30 hops max, 40 byte packets
1 * 105.192.99.62 (105.192.99.62) 1000.83 ms !H *
2 105.192.99.62 (105.192.99.62) 1099.67 ms !H * 1000.47 ms !H
...105.192.192.99[105.192.192.99]80 (105.192.192.99)..... - done
Transfered killall: wget: no process killed
kBit/sek.
traceroute to 104.192.192.133 (104.192.192.133), 30 hops max, 40 byte packets
1 _5.PharusEmmaus.olsr (104.192.192.133) 49.014 ms 9.178 ms 6.556 ms
........ - done
Transfered Terminated
1956 kBit/sek.
traceroute to 105.192.192.133 (105.192.192.133), 30 hops max, 40 byte packets
1 * 105.192.99.62 (105.192.99.62) 999.378 ms !H *
2 105.192.99.62 (105.192.99.62) 1000.22 ms !H * 1000.42 ms !H
...105.192.192.133[105.192.192.133]80 (105.192.192.133)..... - done
Transfered killall: wget: no process killed
kBit/sek.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-01-09 12:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-01-09 12:58 FW: [Fwd: Re: [B.A.T.M.A.N.] B.A.T.M.A.N. läuft jetzt auch permanent auf der Zwingli-Nordost - 105.130.1.67] Lui
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox