[B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")

[B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")

[Lui]

Hi all,

cleanups - and more... ;-)

!!!Important!!!
For those of you, who have installed any previous versions - 1st:
#>ipkg remove freifunk-batman-de

For others:
freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
It allows to easily configure and manage all aspects of the batman-daemon in a side-by-side environment with olsr (even for unskilled users).
The main target have been users in the berlin-freifunk community (104/8 net). The main goal is to raise the amount of batman-nodes in 'a mesh' of heterogeneous skilled node owners over 'the critical-mass' in the phase of development and testing... and of course, to make it easy for myself to manage testing with 10++ batman-nodes.

If the interface-config of your hardware differ from those of the Linksys wrt54g v2++/wrt54gl/...(->[2])
you have to use freifunk-batman-*std*-de...

Find it at: http://freifunk.schmudde.com/ipkg

Regards
Lui

[1] - http://ff-firmware.sourceforge.net/
[2] - http://wiki.openwrt.org/OpenWrtDocs/Configuration#head-b62c144b9886b221e0c4b870edb0dd23a7b6acab

RE: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")

[Felix Bolte]

hi lui,

the batstat looks quite nice!
the animation is also a little eye candy

but the output of "ip route" is still hardcoded to an 105.* address range

can you fix this in the next version? we use 103.* ... you should already 
know ... but in general it is better to make the fiilter dynamic, referred 
to the used network

good job, thx!



have a nice weekend
felix

_________________________________________________________________
Haben Spinnen Ohren? Finden Sie es heraus – mit dem MSN Suche Superquiz via  
http://www.msn-superquiz.de  Jetzt mitmachen und gewinnen!

Re: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")

[axel]

Hi,

I also believe hard coded address ranges should not be, but despite that I 
would like to ask whether it would be possible for you to move over to the 
105 address range. This would also help to once link the clouds together.

Another point is, that there is also a batman-experimental project in 
development which comes up with some new features to measure link quality and 
apply strange routing metrics and I thought that in case it would ever be 
employed it could use the 103 address range to avoid routing conflicts.

best regards,
axel

On Friday, 12. January 2007 18:27, Felix Bolte wrote:
> but the output of "ip route" is still hardcoded to an 105.* address range
>
> can you fix this in the next version? we use 103.* ... you should already
> know ... but in general it is better to make the fiilter dynamic, referred
> to the used network

[B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk

[Lui]

Hi,

freifunk-batman_0.83.ipk is out now.

hope it's usefull
Lui

CHANGES:
# ----------------------------------------------------------------------------

ToDo:
* Info: better representation of status and link-relations...
* Translations: it-fr-nl-<place your language here>
* Config: 'choosing' a prefered gateway
* ...
* keep close to the hight development-cycles of batmand ;-)
* watching out for B.A.T.M.A.N.-IV ;-)

Changes (0.82 -> 0.83)
+ "Raider is Twix" and S55batman is S66batman now - lowers a timestamp problem with S60rdate
+ removed S54(/S65)robin

Changes (0.81 -> 0.82)
+ replaced option d|debug with log... (S55batman log <mode> <time>)
+ fixed cron entry + added tun-ex
+ added: S55... v like batmand -v

Changes (0.80 -> 0.81)
+ use /etc/ff_bat.config and remove extensive use of nvram (/-commit)
+ language *switch* via config...
+ layout issues

Changes (0.7x -> 0.80)
+ (merged) support for non-WRT like hardware (i.e SE505) and tagged-vlans...
+ community network support: choose olsr->batman network (/8 /16 /24) transition.
+ multi language support: de, en (please help with your addional translations)
+ status-page with links to known nodes
+ B.A.T.M.A.N.-III v0.2++ client-mode info on router-frontpage
+ S55batman initscript opens by default traceroute ports
+ re-designed bad handling of NVRAM-vars
# ----------------------------------------------------------------------------

...this last informations are still valid:

>Sent: Freitag, 12. Januar 2007 07:40
>To: B.A.T.M.A.N.-ML
>Subject: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")
>
>Hi all,
>
>cleanups - and more... ;-)
>
>!!!Important!!!
>For those of you, who have installed any previous versions - 1st:
>#>ipkg remove freifunk-batman-de
>
>For others:
>freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
>It allows to easily configure and manage all aspects of the 
>batman-daemon in a side-by-side environment with olsr (even 
>for unskilled users).
>[...]
>The main goal is to raise the amount of 
>batman-nodes in 'a mesh' of heterogeneous skilled node owners 
>over 'the critical-mass' in the phase of development and 
>testing... and of course, to make it easy for myself to manage 
>testing with 10++ batman-nodes.
>
>[...]
>
>Find it at: http://freifunk.schmudde.com/ipkg
>
>Regards
>Lui
>
>[1] - http://ff-firmware.sourceforge.net/

Re: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk

[bh]

Does it work on the Fonera?

On 3/31/07, Lui <batman@schmudde.com> wrote:
> Hi,
>
> freifunk-batman_0.83.ipk is out now.
>
> hope it's usefull
> Lui
>
> CHANGES:
> #
> ----------------------------------------------------------------------------
>
> ToDo:
> * Info: better representation of status and link-relations...
> * Translations: it-fr-nl-<place your language here>
> * Config: 'choosing' a prefered gateway
> * ...
> * keep close to the hight development-cycles of batmand ;-)
> * watching out for B.A.T.M.A.N.-IV ;-)
>
> Changes (0.82 -> 0.83)
> + "Raider is Twix" and S55batman is S66batman now - lowers a timestamp
> problem with S60rdate
> + removed S54(/S65)robin
>
> Changes (0.81 -> 0.82)
> + replaced option d|debug with log... (S55batman log <mode> <time>)
> + fixed cron entry + added tun-ex
> + added: S55... v like batmand -v
>
> Changes (0.80 -> 0.81)
> + use /etc/ff_bat.config and remove extensive use of nvram (/-commit)
> + language *switch* via config...
> + layout issues
>
> Changes (0.7x -> 0.80)
> + (merged) support for non-WRT like hardware (i.e SE505) and tagged-vlans...
> + community network support: choose olsr->batman network (/8 /16 /24)
> transition.
> + multi language support: de, en (please help with your addional
> translations)
> + status-page with links to known nodes
> + B.A.T.M.A.N.-III v0.2++ client-mode info on router-frontpage
> + S55batman initscript opens by default traceroute ports
> + re-designed bad handling of NVRAM-vars
> #
> ----------------------------------------------------------------------------
>
> ...this last informations are still valid:
>
> >Sent: Freitag, 12. Januar 2007 07:40
> >To: B.A.T.M.A.N.-ML
> >Subject: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")
> >
> >Hi all,
> >
> >cleanups - and more... ;-)
> >
> >!!!Important!!!
> >For those of you, who have installed any previous versions - 1st:
> >#>ipkg remove freifunk-batman-de
> >
> >For others:
> >freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
> >It allows to easily configure and manage all aspects of the
> >batman-daemon in a side-by-side environment with olsr (even
> >for unskilled users).
> >[...]
> >The main goal is to raise the amount of
> >batman-nodes in 'a mesh' of heterogeneous skilled node owners
> >over 'the critical-mass' in the phase of development and
> >testing... and of course, to make it easy for myself to manage
> >testing with 10++ batman-nodes.
> >
> >[...]
> >
> >Find it at: http://freifunk.schmudde.com/ipkg
> >
> >Regards
> >Lui
> >
> >[1] - http://ff-firmware.sourceforge.net/
>
> _______________________________________________
> B.A.T.M.A.N mailing list
> B.A.T.M.A.N@open-mesh.net
> https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
>


-- 
Benjamin Henrion <bhenrion at ffii.org>
FFII Brussels - +32-484-566109 - +32-2-4148403

Re: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk

[BlaXwan]

[-- Attachment #1: Type: text/plain, Size: 3484 bytes --]

Hi,
yes batman works greatly on the fonera,
I tested the 0.2.0a version with kamikaze
in a mesh of 2 laptop and 4 fonera configuring
them with the xwrt page that I made (webif-batman package).
In attach some outputs of the test.
Cheers,
happy easter,

Fabio

On Sat, 2007-03-31 at 10:43 +0200, bh@udev.org wrote:
> Does it work on the Fonera?
> 
> On 3/31/07, Lui <batman@schmudde.com> wrote:
> > Hi,
> >
> > freifunk-batman_0.83.ipk is out now.
> >
> > hope it's usefull
> > Lui
> >
> > CHANGES:
> > #
> > ----------------------------------------------------------------------------
> >
> > ToDo:
> > * Info: better representation of status and link-relations...
> > * Translations: it-fr-nl-<place your language here>
> > * Config: 'choosing' a prefered gateway
> > * ...
> > * keep close to the hight development-cycles of batmand ;-)
> > * watching out for B.A.T.M.A.N.-IV ;-)
> >
> > Changes (0.82 -> 0.83)
> > + "Raider is Twix" and S55batman is S66batman now - lowers a timestamp
> > problem with S60rdate
> > + removed S54(/S65)robin
> >
> > Changes (0.81 -> 0.82)
> > + replaced option d|debug with log... (S55batman log <mode> <time>)
> > + fixed cron entry + added tun-ex
> > + added: S55... v like batmand -v
> >
> > Changes (0.80 -> 0.81)
> > + use /etc/ff_bat.config and remove extensive use of nvram (/-commit)
> > + language *switch* via config...
> > + layout issues
> >
> > Changes (0.7x -> 0.80)
> > + (merged) support for non-WRT like hardware (i.e SE505) and tagged-vlans...
> > + community network support: choose olsr->batman network (/8 /16 /24)
> > transition.
> > + multi language support: de, en (please help with your addional
> > translations)
> > + status-page with links to known nodes
> > + B.A.T.M.A.N.-III v0.2++ client-mode info on router-frontpage
> > + S55batman initscript opens by default traceroute ports
> > + re-designed bad handling of NVRAM-vars
> > #
> > ----------------------------------------------------------------------------
> >
> > ...this last informations are still valid:
> >
> > >Sent: Freitag, 12. Januar 2007 07:40
> > >To: B.A.T.M.A.N.-ML
> > >Subject: [B.A.T.M.A.N.] freifunk-batman-de (0.73 "vampimated")
> > >
> > >Hi all,
> > >
> > >cleanups - and more... ;-)
> > >
> > >!!!Important!!!
> > >For those of you, who have installed any previous versions - 1st:
> > >#>ipkg remove freifunk-batman-de
> > >
> > >For others:
> > >freifunk-batman-de is a WebUI-Plugin for the freifunk-firmware (->[1])
> > >It allows to easily configure and manage all aspects of the
> > >batman-daemon in a side-by-side environment with olsr (even
> > >for unskilled users).
> > >[...]
> > >The main goal is to raise the amount of
> > >batman-nodes in 'a mesh' of heterogeneous skilled node owners
> > >over 'the critical-mass' in the phase of development and
> > >testing... and of course, to make it easy for myself to manage
> > >testing with 10++ batman-nodes.
> > >
> > >[...]
> > >
> > >Find it at: http://freifunk.schmudde.com/ipkg
> > >
> > >Regards
> > >Lui
> > >
> > >[1] - http://ff-firmware.sourceforge.net/
> >
> > _______________________________________________
> > B.A.T.M.A.N mailing list
> > B.A.T.M.A.N@open-mesh.net
> > https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
> >
> 
> 

 
 
 --
 Email.it, the professional e-mail, gratis per te: http://www.email.it/f
 
 Sponsor:
 Fai crescere i tuoi sogni. Prestiti semplici e veloci
* Rate da 20 euro al mese
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=6334&d=6-4

[-- Attachment #2: mesh-batman.sh.png --]
[-- Type: image/png, Size: 154250 bytes --]

[-- Attachment #3: mesha6.2 --]
[-- Type: text/plain, Size: 526 bytes --]

WARNING: You are using the unstable batman branch. If you are interested in *using* batman get the latest stable release !
192.168.10.11, GW: 192.168.10.11(54) via: 192.168.10.11(54) 192.168.10.15(4) 192.168.10.14(1)
192.168.10.12, GW: 192.168.10.12(60) via: 192.168.10.12(60) 192.168.10.15(0)
192.168.10.13, GW: 192.168.10.13(58) via: 192.168.10.13(58) 192.168.10.15(1)
192.168.10.14, GW: 192.168.10.14(45) via: 192.168.10.14(45) 192.168.10.11(0) 192.168.10.15(12)
192.168.10.15, GW: 192.168.10.15(60) via: 192.168.10.15(60)

[-- Attachment #4: mesha6-2.png --]
[-- Type: image/png, Size: 74707 bytes --]

Re: [B.A.T.M.A.N.] Relaese: freifunk-batman_0.83.ipk

[Lemonde]

Hello, Lui and everyone.

Thank you for your kind work. I've tried.

machine: buffalo whr-hp-g54 x 2
http://www.buffalo-technology.com/products/product-detail.php?productid=124&categoryid=28
one as gateway node (gw) and another as only node (nd)

It seems to work well.
gw:
<nvram>
ff_bat_cron=on
ff_bat_gw_uplink=11
ff_bat_netmig=192.168.1/192.168.2
ff_bat_ran_if=eth1:bat
ff_bat_ran_ip=192.168.2.1
ff_bat_ran_on=1
ff_bat_ran_pf=24
ff_bat_start=1

root@freifunk-batman1:~# ps |grep batman
 1157 root        400 S   batmand -g 11 eth1:bat
 1162 root        400 S   batmand -g 11 eth1:bat
 1164 root        400 S   batmand -g 11 eth1:bat
 1168 root        400 S   batmand -g 11 eth1:bat
 2241 root        420 R   grep batman
root@freifunk-batman1:~# ping 192.168.2.2
PING 192.168.2.2 (192.168.2.2): 56 data bytes
64 bytes from 192.168.2.2: icmp_seq=0 ttl=64 time=1.9 ms
64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=1.4 ms
64 bytes from 192.168.2.2: icmp_seq=2 ttl=64 time=1.4 ms
64 bytes from 192.168.2.2: icmp_seq=3 ttl=64 time=1.4 ms

nd:
<nvram>
ff_bat_cron=on
ff_bat_gw_choose=2
ff_bat_gw_uplink=0
ff_bat_netmig=192.168.1/192.168.2
ff_bat_ran_if=eth1:bat
ff_bat_ran_ip=192.168.2.2
ff_bat_ran_on=1
ff_bat_ran_pf=24
ff_bat_start=1

root@freifunk-batman2:~# ps |grep batman
 7236 root        472 S   batmand -r 2 eth1:bat
 7239 root        472 S   batmand -r 2 eth1:bat
 7240 root        472 S   batmand -r 2 eth1:bat
20048 root        268 S   grep batman
root@freifunk-batman2:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1): 56 data bytes
64 bytes from 192.168.2.1: icmp_seq=0 ttl=64 time=3.4 ms
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=1.4 ms
64 bytes from 192.168.2.1: icmp_seq=2 ttl=64 time=1.4 ms
64 bytes from 192.168.2.1: icmp_seq=3 ttl=64 time=1.4 ms


I have some question.
(1) gw shows tun interface,

root@freifunk-batman1:~# ifconfig |grep tun
tun0      Link encap:UNSPEC  HWaddr 
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
root@freifunk-batman1:~#

but nd shows no tun interface.

root@freifunk-batman2:~# ifconfig |grep tun
root@freifunk-batman2:~#

Is this right? Is any setting missed?

(2) From webIF of nd, batman info shows
------------------------------------------------------------------
               | Please wait...
               | S66batman: Connecting B.A.T.M.A.N. (routings)
Statistics:  | S66batman: # batmand -c -b -d 1
               | 192.168.2.1, GW: 192.168.2.1(59) via: 192.168.2.1(59)
-------------------------------------------------------------------
               | S66batman: Connecting B.A.T.M.A.N. (gateways)
               | S66batman: # batmand -c -b -d 2
Gateways: | 192.168.2.1 via: 192.168.2.1(59), gw_class 11 - >6 MBit, 
reliability: 9
               | No gateways in range ...
--------------------------------------------------------------------
Does the last line "No gateways in range ..." mean failure to find 
gateway? If so, why does it happen?

regards,

zukky


Lui wrote:
> Hi,
>
> freifunk-batman_0.83.ipk is out now.
>
> hope it's usefull
> Lui
>