From: "Linus Lüssing" <linus.luessing@web.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCH] batman-adv: Adding netfilter-bridge hooks
Date: Tue, 26 Oct 2010 00:06:14 +0200 [thread overview]
Message-ID: <1288044374-11771-2-git-send-email-linus.luessing@web.de> (raw)
In-Reply-To: <AANLkTi=MbTkJiD-=7LcWdzMdqcJeqaBkX2G6O3oeUDZ8@mail.gmail.com>
batman-adv is receiving and sending the packets of its own ether type
on a very early/low level. Therefore we need to add explicit hooks to
give netfilter/ebtables a chance to filter them.
//git revert 660d20261343e0b2ff57e51e50d7eb0e557d5e5b
//Signed-off-by: Linus Lüssing <linus.luessing@web.de>
//Reported-by: Antonio Quartulli <ordex@ritirata.org>
---
hard-interface.c | 70 ++++++++++++++++++++++++++++++------------------------
send.c | 8 ++++-
2 files changed, 45 insertions(+), 33 deletions(-)
diff --git a/hard-interface.c b/hard-interface.c
index ef95680..9153b19 100644
--- a/hard-interface.c
+++ b/hard-interface.c
@@ -30,6 +30,7 @@
#include "hash.h"
#include <linux/if_arp.h>
+#include <linux/netfilter_bridge.h>
#include "compat.h"
@@ -539,46 +540,29 @@ out:
return NOTIFY_DONE;
}
-/* receive a packet with the batman ethertype coming on a hard
- * interface */
-int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *ptype, struct net_device *orig_dev)
+static int batman_skb_recv_finish(struct sk_buff *skb)
{
- struct bat_priv *bat_priv;
struct batman_packet *batman_packet;
struct batman_if *batman_if;
+ struct bat_priv *bat_priv;
int ret;
- batman_if = container_of(ptype, struct batman_if, batman_adv_ptype);
- skb = skb_share_check(skb, GFP_ATOMIC);
-
- /* skb was released by skb_share_check() */
- if (!skb)
- goto err_out;
-
- /* packet should hold at least type and version */
- if (unlikely(!pskb_may_pull(skb, 2)))
+ batman_if = get_batman_if_by_netdev(skb->dev);
+ if (!batman_if)
goto err_free;
- /* expect a valid ethernet header here. */
- if (unlikely(skb->mac_len != sizeof(struct ethhdr)
- || !skb_mac_header(skb)))
+ if (!batman_if->soft_iface)
goto err_free;
- if (!batman_if->soft_iface)
+ /* discard frames on not active interfaces */
+ if (batman_if->if_status != IF_ACTIVE)
goto err_free;
bat_priv = netdev_priv(batman_if->soft_iface);
-
if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
goto err_free;
- /* discard frames on not active interfaces */
- if (batman_if->if_status != IF_ACTIVE)
- goto err_free;
-
batman_packet = (struct batman_packet *)skb->data;
-
if (batman_packet->version != COMPAT_VERSION) {
bat_dbg(DBG_BATMAN, bat_priv,
"Drop packet: incompatible batman version (%i)\n",
@@ -624,18 +608,42 @@ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
}
if (ret == NET_RX_DROP)
- kfree_skb(skb);
+ goto err_free;
+
+ return 0;
- /* return NET_RX_SUCCESS in any case as we
- * most probably dropped the packet for
- * routing-logical reasons. */
+err_free:
+ kfree_skb(skb);
+ return 0;
+}
- return NET_RX_SUCCESS;
+/* receive a packet with the batman ethertype coming on a hard
+ * interface */
+int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *ptype, struct net_device *orig_dev)
+{
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ /* skb was released by skb_share_check() */
+ if (!skb)
+ return 0;
+
+ /* packet should hold at least type and version */
+ if (unlikely(!pskb_may_pull(skb, 2)))
+ goto err_free;
+
+ /* expect a valid ethernet header here. */
+ if (unlikely(skb->mac_len != sizeof(struct ethhdr) ||
+ !skb_mac_header(skb)))
+ goto err_free;
+
+ /* if netfilter/ebtables wants to block incoming batman
+ * packets then give them a chance to do so here */
+ return NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, dev,
+ NULL, batman_skb_recv_finish);
err_free:
kfree_skb(skb);
-err_out:
- return NET_RX_DROP;
+ return 0;
}
struct notifier_block hard_if_notifier = {
diff --git a/send.c b/send.c
index a96a786..11a009f 100644
--- a/send.c
+++ b/send.c
@@ -30,6 +30,7 @@
#include "aggregation.h"
#include "gateway_common.h"
#include "originator.h"
+#include <linux/netfilter_bridge.h>
#include "compat.h"
@@ -95,9 +96,12 @@ int send_skb_packet(struct sk_buff *skb,
/* dev_queue_xmit() returns a negative result on error. However on
* congestion and traffic shaping, it drops and returns NET_XMIT_DROP
- * (which is > 0). This will not be treated as an error. */
+ * (which is > 0). This will not be treated as an error.
+ * Also, if netfilter/ebtables wants to block outgoing batman
+ * packets then giving them a chance to do so here */
- return dev_queue_xmit(skb);
+ return NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+ dev_queue_xmit);
send_skb_err:
kfree_skb(skb);
return NET_XMIT_DROP;
--
1.7.1
next prev parent reply other threads:[~2010-10-25 22:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-25 4:03 [B.A.T.M.A.N.] batman-adv multi-hop route Xianghua Xiao
2010-10-25 12:48 ` Marek Lindner
2010-10-25 22:06 ` Linus Lüssing
2010-10-25 22:16 ` Xianghua Xiao
2010-10-28 1:17 ` Xianghua Xiao
2010-10-28 2:02 ` Xianghua Xiao
2010-10-28 11:58 ` Linus Lüssing
2010-10-28 14:14 ` Xianghua Xiao
2010-10-25 22:06 ` Linus Lüssing [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-05-17 7:20 [B.A.T.M.A.N.] Blocking OGMs from a node for testing purpose Antonio Quartulli
2010-05-19 1:25 ` [B.A.T.M.A.N.] [PATCH] batman-adv: Adding netfilter-bridge hooks Linus Lüssing
2010-05-21 8:21 ` Antonio Quartulli
2010-05-21 10:17 ` Linus Lüssing
2010-05-21 18:45 ` Antonio Quartulli
2010-05-22 10:51 ` Marek Lindner
2010-05-25 23:56 ` Linus Lüssing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288044374-11771-2-git-send-email-linus.luessing@web.de \
--to=linus.luessing@web.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox