From: Antonio Quartulli <antonio@meshcoding.com>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Antonio Quartulli <antonio@open-mesh.com>
Subject: [B.A.T.M.A.N.] [PATCHv2 2/2] batman-adv: rename gw_deselect() to gw_reselect()
Date: Mon, 4 Nov 2013 20:59:41 +0100 [thread overview]
Message-ID: <1383595181-2061-2-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1383595181-2061-1-git-send-email-antonio@meshcoding.com>
From: Antonio Quartulli <antonio@open-mesh.com>
The function batadv_gw_deselect() is actually not deselecting
anything. It is just informing the GW code to perform a
re-election procedure when possible.
The current gateway is not being touched at all and therefore
the name of this function is rather misleading.
Rename it to batadv_gw_reselect() to batadv_gw_reselect()
to make its behaviour easier to grasp.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
---
gateway_client.c | 35 +++++++++++++++++++++++------------
gateway_client.h | 2 +-
gateway_common.c | 2 +-
sysfs.c | 10 +++++-----
4 files changed, 30 insertions(+), 19 deletions(-)
diff --git a/gateway_client.c b/gateway_client.c
index 2903bdb..fcaebec 100644
--- a/gateway_client.c
+++ b/gateway_client.c
@@ -105,7 +105,18 @@ static void batadv_gw_select(struct batadv_priv *bat_priv,
spin_unlock_bh(&bat_priv->gw.list_lock);
}
-void batadv_gw_deselect(struct batadv_priv *bat_priv)
+/**
+ * batadv_gw_reselect - force a gateway reselection
+ * @bat_priv: the bat priv with all the soft interface information
+ *
+ * Set a flag to remind the GW component to perform a new gateway reselection.
+ * However this function does not ensure that the current gateway is going to be
+ * deselected. The reselection mechanism may elect the same gateway once again.
+ *
+ * This means that invoking batadv_gw_reselect() does not guarantee a gateway
+ * change and therefore a uevent is not necessarily expected.
+ */
+void batadv_gw_reselect(struct batadv_priv *bat_priv)
{
atomic_set(&bat_priv->gw.reselect, 1);
}
@@ -243,7 +254,7 @@ void batadv_gw_election(struct batadv_priv *bat_priv)
router = batadv_orig_node_get_router(next_gw->orig_node);
if (!router) {
- batadv_gw_deselect(bat_priv);
+ batadv_gw_reselect(bat_priv);
goto out;
}
}
@@ -295,11 +306,11 @@ void batadv_gw_check_election(struct batadv_priv *bat_priv,
curr_gw_orig = batadv_gw_get_selected_orig(bat_priv);
if (!curr_gw_orig)
- goto deselect;
+ goto reselect;
router_gw = batadv_orig_node_get_router(curr_gw_orig);
if (!router_gw)
- goto deselect;
+ goto reselect;
/* this node already is the gateway */
if (curr_gw_orig == orig_node)
@@ -327,8 +338,8 @@ void batadv_gw_check_election(struct batadv_priv *bat_priv,
"Restarting gateway selection: better gateway found (tq curr: %i, tq new: %i)\n",
gw_tq_avg, orig_tq_avg);
-deselect:
- batadv_gw_deselect(bat_priv);
+reselect:
+ batadv_gw_reselect(bat_priv);
out:
if (curr_gw_orig)
batadv_orig_node_free_ref(curr_gw_orig);
@@ -458,7 +469,7 @@ void batadv_gw_node_update(struct batadv_priv *bat_priv,
*/
curr_gw = batadv_gw_get_selected_gw_node(bat_priv);
if (gw_node == curr_gw)
- batadv_gw_deselect(bat_priv);
+ batadv_gw_reselect(bat_priv);
}
out:
@@ -484,7 +495,7 @@ void batadv_gw_node_purge(struct batadv_priv *bat_priv)
struct batadv_gw_node *gw_node, *curr_gw;
struct hlist_node *node_tmp;
unsigned long timeout = msecs_to_jiffies(2 * BATADV_PURGE_TIMEOUT);
- int do_deselect = 0;
+ int do_reselect = 0;
curr_gw = batadv_gw_get_selected_gw_node(bat_priv);
@@ -498,7 +509,7 @@ void batadv_gw_node_purge(struct batadv_priv *bat_priv)
continue;
if (curr_gw == gw_node)
- do_deselect = 1;
+ do_reselect = 1;
hlist_del_rcu(&gw_node->list);
batadv_gw_node_free_ref(gw_node);
@@ -506,9 +517,9 @@ void batadv_gw_node_purge(struct batadv_priv *bat_priv)
spin_unlock_bh(&bat_priv->gw.list_lock);
- /* gw_deselect() needs to acquire the gw_list_lock */
- if (do_deselect)
- batadv_gw_deselect(bat_priv);
+ /* gw_reselect() needs to acquire the gw_list_lock */
+ if (do_reselect)
+ batadv_gw_reselect(bat_priv);
if (curr_gw)
batadv_gw_node_free_ref(curr_gw);
diff --git a/gateway_client.h b/gateway_client.h
index d95c2d2..e73cb15 100644
--- a/gateway_client.h
+++ b/gateway_client.h
@@ -21,7 +21,7 @@
#define _NET_BATMAN_ADV_GATEWAY_CLIENT_H_
void batadv_gw_check_client_stop(struct batadv_priv *bat_priv);
-void batadv_gw_deselect(struct batadv_priv *bat_priv);
+void batadv_gw_reselect(struct batadv_priv *bat_priv);
void batadv_gw_election(struct batadv_priv *bat_priv);
struct batadv_orig_node *
batadv_gw_get_selected_orig(struct batadv_priv *bat_priv);
diff --git a/gateway_common.c b/gateway_common.c
index b211b0f..5795d9a 100644
--- a/gateway_common.c
+++ b/gateway_common.c
@@ -164,7 +164,7 @@ ssize_t batadv_gw_bandwidth_set(struct net_device *net_dev, char *buff,
if ((down_curr == down_new) && (up_curr == up_new))
return count;
- batadv_gw_deselect(bat_priv);
+ batadv_gw_reselect(bat_priv);
batadv_info(net_dev,
"Changing gateway bandwidth from: '%u.%u/%u.%u MBit' to: '%u.%u/%u.%u MBit'\n",
down_curr / 10, down_curr % 10, up_curr / 10, up_curr % 10,
diff --git a/sysfs.c b/sysfs.c
index d1765fd..c686313 100644
--- a/sysfs.c
+++ b/sysfs.c
@@ -329,10 +329,10 @@ static ssize_t batadv_show_bat_algo(struct kobject *kobj,
return sprintf(buff, "%s\n", bat_priv->bat_algo_ops->name);
}
-static void batadv_post_gw_deselect(struct net_device *net_dev)
+static void batadv_post_gw_reselect(struct net_device *net_dev)
{
struct batadv_priv *bat_priv = netdev_priv(net_dev);
- batadv_gw_deselect(bat_priv);
+ batadv_gw_reselect(bat_priv);
}
static ssize_t batadv_show_gw_mode(struct kobject *kobj, struct attribute *attr,
@@ -408,7 +408,7 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
batadv_info(net_dev, "Changing gw mode from: %s to: %s\n",
curr_gw_mode_str, buff);
- /* invoking batadv_gw_deselect() is not enough to really de-select the
+ /* invoking batadv_gw_reselect() is not enough to really de-select the
* current GW. It will only instruct the gateway code to perform a
* re-election the next time that this is needed.
*
@@ -417,7 +417,7 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
* client mode reactivation. This is operation is performed in
* batadv_gw_check_client_stop().
*/
- batadv_gw_deselect(bat_priv);
+ batadv_gw_reselect(bat_priv);
/* always call batadv_gw_check_client_stop() before changing the gateway
* state
*/
@@ -470,7 +470,7 @@ BATADV_ATTR_SIF_UINT(orig_interval, S_IRUGO | S_IWUSR, 2 * BATADV_JITTER,
BATADV_ATTR_SIF_UINT(hop_penalty, S_IRUGO | S_IWUSR, 0, BATADV_TQ_MAX_VALUE,
NULL);
BATADV_ATTR_SIF_UINT(gw_sel_class, S_IRUGO | S_IWUSR, 1, BATADV_TQ_MAX_VALUE,
- batadv_post_gw_deselect);
+ batadv_post_gw_reselect);
static BATADV_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, batadv_show_gw_bwidth,
batadv_store_gw_bwidth);
#ifdef CONFIG_BATMAN_ADV_DEBUG
--
1.8.4.2
next prev parent reply other threads:[~2013-11-04 19:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-04 19:59 [B.A.T.M.A.N.] [PATCHv2 1/2] batman-adv: deselect current GW on client mode switch off Antonio Quartulli
2013-11-04 19:59 ` Antonio Quartulli [this message]
2013-11-05 7:59 ` [B.A.T.M.A.N.] [PATCHv2 2/2] batman-adv: rename gw_deselect() to gw_reselect() Marek Lindner
2013-11-05 7:52 ` [B.A.T.M.A.N.] [PATCHv2 1/2] batman-adv: deselect current GW on client mode switch off Marek Lindner
-- strict thread matches above, loose matches on Subject: below --
2013-10-27 12:02 Antonio Quartulli
2013-10-27 12:02 ` [B.A.T.M.A.N.] [PATCHv2 2/2] batman-adv: rename gw_deselect() to gw_reselect() Antonio Quartulli
2013-11-04 14:11 ` Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383595181-2061-2-git-send-email-antonio@meshcoding.com \
--to=antonio@meshcoding.com \
--cc=antonio@open-mesh.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox