From: Simon Wunderlich <sw@simonwunderlich.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Simon Wunderlich <simon@open-mesh.com>
Subject: [B.A.T.M.A.N.] [PATCHv4 1/2] batman-adv: add debugfs structure for information per interface
Date: Thu, 21 Nov 2013 11:52:15 +0100 [thread overview]
Message-ID: <1385031136-15967-2-git-send-email-sw@simonwunderlich.de> (raw)
In-Reply-To: <1385031136-15967-1-git-send-email-sw@simonwunderlich.de>
From: Simon Wunderlich <simon@open-mesh.com>
To show information per interface, add a debugfs hardif structure
similar to the system in sysfs. Hard interface folders will be created
in "$debugfs/batman-adv/". Files are not yet added.
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
---
Changes to PATCHv3:
* move hardif debugfs files into $debugfs/batman-adv/$hardif
Changes to PATCHv2:
* add macro to add hardif debug infos
---
debugfs.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
debugfs.h | 2 ++
hard-interface.c | 9 +++++++
types.h | 2 ++
4 files changed, 83 insertions(+)
diff --git a/debugfs.c b/debugfs.c
index 367ea86..e01e1c0 100644
--- a/debugfs.c
+++ b/debugfs.c
@@ -366,6 +366,22 @@ static struct batadv_debuginfo *batadv_mesh_debuginfos[] = {
NULL,
};
+#define BATADV_HARDIF_DEBUGINFO(_name, _mode, _open) \
+struct batadv_debuginfo batadv_hardif_debuginfo_##_name = { \
+ .attr = { .name = __stringify(_name), \
+ .mode = _mode, }, \
+ .fops = { .owner = THIS_MODULE, \
+ .open = _open, \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .release = single_release, \
+ } \
+};
+
+static struct batadv_debuginfo *batadv_hardif_debuginfos[] = {
+ NULL,
+};
+
void batadv_debugfs_init(void)
{
struct batadv_debuginfo **bat_debug;
@@ -393,6 +409,7 @@ void batadv_debugfs_init(void)
return;
err:
debugfs_remove_recursive(batadv_debugfs);
+ batadv_debugfs = NULL;
}
void batadv_debugfs_destroy(void)
@@ -401,6 +418,59 @@ void batadv_debugfs_destroy(void)
batadv_debugfs = NULL;
}
+/**
+ * batadv_debugfs_add_hardif - creates the base directory for a hard interface
+ * in debugfs.
+ * @hard_iface: hard interface which should be added.
+ */
+int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface)
+{
+ struct batadv_debuginfo **bat_debug;
+ struct dentry *file;
+
+ if (!batadv_debugfs)
+ goto out;
+
+ hard_iface->debug_dir = debugfs_create_dir(hard_iface->net_dev->name,
+ batadv_debugfs);
+ if (!hard_iface->debug_dir)
+ goto out;
+
+ for (bat_debug = batadv_hardif_debuginfos; *bat_debug; ++bat_debug) {
+ file = debugfs_create_file(((*bat_debug)->attr).name,
+ S_IFREG | ((*bat_debug)->attr).mode,
+ hard_iface->debug_dir,
+ hard_iface->net_dev,
+ &(*bat_debug)->fops);
+ if (!file)
+ goto rem_attr;
+ }
+
+ return 0;
+rem_attr:
+ debugfs_remove_recursive(hard_iface->debug_dir);
+ hard_iface->debug_dir = NULL;
+out:
+#ifdef CONFIG_DEBUG_FS
+ return -ENOMEM;
+#else
+ return 0;
+#endif /* CONFIG_DEBUG_FS */
+}
+
+/**
+ * batadv_debugfs_del_hardif - delete the base directory for a hard interface
+ * in debugfs.
+ * @hard_iface: hard interface which is deleted.
+ */
+void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface)
+{
+ if (batadv_debugfs) {
+ debugfs_remove_recursive(hard_iface->debug_dir);
+ hard_iface->debug_dir = NULL;
+ }
+}
+
int batadv_debugfs_add_meshif(struct net_device *dev)
{
struct batadv_priv *bat_priv = netdev_priv(dev);
diff --git a/debugfs.h b/debugfs.h
index 169ab7b..f6e16f3 100644
--- a/debugfs.h
+++ b/debugfs.h
@@ -21,5 +21,7 @@ void batadv_debugfs_init(void);
void batadv_debugfs_destroy(void);
int batadv_debugfs_add_meshif(struct net_device *dev);
void batadv_debugfs_del_meshif(struct net_device *dev);
+int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface);
+void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface);
#endif /* _NET_BATMAN_ADV_DEBUGFS_H_ */
diff --git a/hard-interface.c b/hard-interface.c
index 42db38e..3873175 100644
--- a/hard-interface.c
+++ b/hard-interface.c
@@ -20,6 +20,7 @@
#include "translation-table.h"
#include "routing.h"
#include "sysfs.h"
+#include "debugfs.h"
#include "originator.h"
#include "hash.h"
#include "bridge_loop_avoidance.h"
@@ -536,6 +537,7 @@ static void batadv_hardif_remove_interface_finish(struct work_struct *work)
hard_iface = container_of(work, struct batadv_hard_iface,
cleanup_work);
+ batadv_debugfs_del_hardif(hard_iface);
batadv_sysfs_del_hardif(&hard_iface->hardif_obj);
batadv_hardif_free_ref(hard_iface);
}
@@ -566,6 +568,11 @@ batadv_hardif_add_interface(struct net_device *net_dev)
hard_iface->net_dev = net_dev;
hard_iface->soft_iface = NULL;
hard_iface->if_status = BATADV_IF_NOT_IN_USE;
+
+ ret = batadv_debugfs_add_hardif(hard_iface);
+ if (ret)
+ goto free_sysfs;
+
INIT_LIST_HEAD(&hard_iface->list);
INIT_WORK(&hard_iface->cleanup_work,
batadv_hardif_remove_interface_finish);
@@ -582,6 +589,8 @@ batadv_hardif_add_interface(struct net_device *net_dev)
return hard_iface;
+free_sysfs:
+ batadv_sysfs_del_hardif(&hard_iface->hardif_obj);
free_if:
kfree(hard_iface);
release_dev:
diff --git a/types.h b/types.h
index 245a547..0e5d238 100644
--- a/types.h
+++ b/types.h
@@ -81,6 +81,7 @@ struct batadv_hard_iface_bat_iv {
* @rcu: struct used for freeing in an RCU-safe manner
* @bat_iv: BATMAN IV specific per hard interface data
* @cleanup_work: work queue callback item for hard interface deinit
+ * @debug_dir: dentry for nc subdir in batman-adv directory in debugfs
*/
struct batadv_hard_iface {
struct list_head list;
@@ -95,6 +96,7 @@ struct batadv_hard_iface {
struct rcu_head rcu;
struct batadv_hard_iface_bat_iv bat_iv;
struct work_struct cleanup_work;
+ struct dentry *debug_dir;
};
/**
--
1.7.10.4
next prev parent reply other threads:[~2013-11-21 10:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-21 10:52 [B.A.T.M.A.N.] [PATCHv4 0/2] debugfs files for the network wide multi interface optimization Simon Wunderlich
2013-11-21 10:52 ` Simon Wunderlich [this message]
2013-11-21 13:16 ` [B.A.T.M.A.N.] [PATCHv5 1/2] batman-adv: add debugfs structure for information per interface Simon Wunderlich
2013-11-22 17:20 ` Marek Lindner
2013-11-21 10:52 ` [B.A.T.M.A.N.] [PATCHv4 2/2] batman-adv: add debugfs support to view multiif tables Simon Wunderlich
2013-11-22 17:25 ` Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385031136-15967-2-git-send-email-sw@simonwunderlich.de \
--to=sw@simonwunderlich.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=simon@open-mesh.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox