From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Antonio Quartulli Date: Mon, 23 Dec 2013 01:28:05 +0100 Message-Id: <1387758485-3568-2-git-send-email-antonio@meshcoding.com> In-Reply-To: <1387758485-3568-1-git-send-email-antonio@meshcoding.com> References: <1387758485-3568-1-git-send-email-antonio@meshcoding.com> Subject: [B.A.T.M.A.N.] [PATCH maint 2/2] batman-adv: clean nf state when removing protocol header Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@lists.open-mesh.org Cc: Antonio Quartulli If an interface enslaved into batman-adv is a bridge (or a virtual interface built on top of a bridge) the nf_bridge member of the skbs reaching the soft-interface is filled with the state about "netfilter bridge" operations. Then, if one of such skbs is locally delivered, the nf_bridge member should be cleaned up to avoid that the old state could mess up with other "netfilter bridge" operations when entering a second bridge. This is needed because batman-adv is an encapsulation protocol. However at the moment skb->nf_bridge is not released at all leading to bogus "netfilter bridge" behaviours. Fix this by cleaning the netfilter state of the skb before it gets delivered to the upper layer in interface_rx(). Signed-off-by: Antonio Quartulli --- soft-interface.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/soft-interface.c b/soft-interface.c index 33b6144..08086cf 100644 --- a/soft-interface.c +++ b/soft-interface.c @@ -324,6 +324,11 @@ void batadv_interface_rx(struct net_device *soft_iface, skb_pull_rcsum(skb, hdr_size); skb_reset_mac_header(skb); + /* clean the netfilter state now that the batman-adv header has been + * removed + */ + nf_reset(skb); + ethhdr = eth_hdr(skb); switch (ntohs(ethhdr->h_proto)) { -- 1.8.5.2