From: Antonio Quartulli <antonio@meshcoding.com>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Antonio Quartulli <antonio@open-mesh.com>
Subject: [B.A.T.M.A.N.] [RFC 12/23] batman-adv: add base throughput attribute
Date: Tue, 11 Feb 2014 13:48:12 +0100 [thread overview]
Message-ID: <1392122903-805-13-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1392122903-805-1-git-send-email-antonio@meshcoding.com>
From: Antonio Quartulli <antonio@open-mesh.com>
when batman-adv is asked to estimate/compute the throughput
of an interface, but it fails for whatever reason, then the
value in this attribute is used
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
---
bat_v.c | 3 +++
main.h | 7 +++++++
sysfs.c | 7 +++++++
types.h | 1 +
4 files changed, 18 insertions(+)
diff --git a/bat_v.c b/bat_v.c
index d5457b3..3aa42ec 100644
--- a/bat_v.c
+++ b/bat_v.c
@@ -75,6 +75,9 @@ static struct batadv_algo_ops batadv_batman_v __read_mostly = {
int batadv_v_mesh_init(struct batadv_priv *bat_priv)
{
+ atomic_set(&bat_priv->bat_v.base_throughput,
+ BATADV_DEFAULT_BASE_THROUGHPUT);
+
return batadv_v_ogm_init(bat_priv);
}
diff --git a/main.h b/main.h
index 47fb9ed..5699c9f 100644
--- a/main.h
+++ b/main.h
@@ -33,6 +33,13 @@
#define BATADV_MAX_METRIC 0xFFFFFFFF
#define BATADV_JITTER 20
+/**
+ * BATADV_DEFAULT_BASE_THROUGHPUT - default value used as throughput for
+ * hard_ifaces for which it is not possible to measure/estimate the real one.
+ * Value is expressed in Mbps/10
+ */
+#define BATADV_DEFAULT_BASE_THROUGHPUT 10
+
/* Time To Live of broadcast messages */
#define BATADV_TTL 50
diff --git a/sysfs.c b/sysfs.c
index 8bbbdfa..a670eeb 100644
--- a/sysfs.c
+++ b/sysfs.c
@@ -606,6 +606,10 @@ BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR,
#endif
static BATADV_ATTR(isolation_mark, S_IRUGO | S_IWUSR,
batadv_show_isolation_mark, batadv_store_isolation_mark);
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+BATADV_ATTR_SIF_UINT2(base_throughput, bat_v.base_throughput, S_IRUGO | S_IWUSR,
+ 1, UINT_MAX, NULL);
+#endif
static struct batadv_attribute *batadv_mesh_attrs[] = {
&batadv_attr_aggregated_ogms,
@@ -630,6 +634,9 @@ static struct batadv_attribute *batadv_mesh_attrs[] = {
&batadv_attr_network_coding,
#endif
&batadv_attr_isolation_mark,
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ &batadv_attr_base_throughput,
+#endif
NULL,
};
diff --git a/types.h b/types.h
index 64316b9..22d621e 100644
--- a/types.h
+++ b/types.h
@@ -741,6 +741,7 @@ struct batadv_priv_bat_v {
int ogm_buff_len;
struct delayed_work ogm_wq;
atomic_t ogm_seqno;
+ atomic_t base_throughput;
};
/**
--
1.8.5.3
next prev parent reply other threads:[~2014-02-11 12:48 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-11 12:48 [B.A.T.M.A.N.] [RFC 00/23] Introducing a new routing protocol: B.A.T.M.A.N. V Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 01/23] batman-adv: invoke ogm_schedule() only when the interface is activated Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 02/23] batman-adv: Add hard_iface specific sysfs wrapper macros for UINT Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 03/23] batman-adv: ELP - adding basic infrastructure Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 04/23] batman-adv: ELP - creating neighbor structures Antonio Quartulli
2014-02-11 15:32 ` Andrew Lunn
2014-02-11 16:02 ` Antonio Quartulli
2014-02-11 16:11 ` Lew Pitcher
2014-02-11 16:26 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 05/23] batman-adv: ELP - exporting neighbor list via debugfs Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 06/23] batman-adv: ELP - adding sysfs parameter for elp interval Antonio Quartulli
2014-02-11 16:59 ` Andrew Lunn
2014-02-11 17:08 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 07/23] batman-adv: OGMv2 - add basic infrastructure Antonio Quartulli
2014-02-11 17:12 ` Andrew Lunn
2014-02-11 17:52 ` Antonio Quartulli
2014-02-12 7:44 ` Andrew Lunn
2014-02-12 7:58 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 08/23] batman-adv: OGMv2 - implement originators logic Antonio Quartulli
2014-02-11 17:22 ` Andrew Lunn
2014-02-11 17:30 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 09/23] batman-adv: OGMv2 - purge obsolete potential routers Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 10/23] batman-adv: split name from variable for uint mesh attributes Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 11/23] batman-adv: add throughput attribute to hard_ifaces Antonio Quartulli
2014-02-12 8:42 ` Andrew Lunn
2014-02-11 12:48 ` Antonio Quartulli [this message]
2014-02-12 8:40 ` [B.A.T.M.A.N.] [RFC 12/23] batman-adv: add base throughput attribute Andrew Lunn
2014-02-12 12:20 ` Antonio Quartulli
2014-02-13 9:36 ` Andrew Lunn
2014-02-13 9:53 ` Antonio Quartulli
2014-02-13 9:57 ` Andrew Lunn
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 13/23] batman-adv: add last_unicast_tx to struct neigh_node_elp Antonio Quartulli
2014-02-12 8:49 ` Andrew Lunn
2014-02-12 12:25 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 14/23] batman-adv: ELP - compute the metric based on the estimated throughput Antonio Quartulli
2014-02-12 8:58 ` Andrew Lunn
2014-02-12 12:27 ` Antonio Quartulli
2014-02-12 15:44 ` Antonio Quartulli
2014-02-13 9:45 ` Andrew Lunn
2014-02-13 9:46 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 15/23] batman-adv: ELP - send unicast ELP packets for throughput sampling Antonio Quartulli
2014-02-12 9:12 ` Andrew Lunn
2014-02-12 12:12 ` Antonio Quartulli
2014-02-12 12:54 ` Felix Fietkau
2014-02-12 12:56 ` Antonio Quartulli
2014-02-12 13:02 ` Antonio Quartulli
2014-02-13 9:55 ` Andrew Lunn
2014-02-13 10:02 ` Antonio Quartulli
2014-02-13 10:09 ` Andrew Lunn
2014-02-13 10:13 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 16/23] batman-adv: ELP - read estimated throughput from cfg80211 Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 17/23] batman-adv: ELP - implement dead neigh node detection Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 18/23] batman-adv: ELP - use phydev to determine link characteristics Antonio Quartulli
2014-02-13 8:17 ` Antonio Quartulli
2014-02-13 8:19 ` Antonio Quartulli
2014-02-13 10:52 ` Andrew Lunn
2014-02-13 11:02 ` Antonio Quartulli
2014-02-13 11:44 ` Andrew Lunn
2014-02-14 8:24 ` Antonio Quartulli
2014-02-14 17:38 ` Andrew Lunn
2014-02-14 17:46 ` Antonio Quartulli
2014-02-14 18:18 ` Andrew Lunn
2014-02-14 19:18 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 19/23] batman-adv: add bat_neigh_free() API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 20/23] batman-adv: B.A.T.M.A.N. V - implement " Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 21/23] batman-adv: B.A.T.M.A.N. V - implement neigh_is_equiv_or_better API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 22/23] batman-adv: B.A.T.M.A.N. V - implement bat_neigh_cmp API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 23/23] batman-adv: B.A.T.M.A.N. V - implement bat_orig_print API Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392122903-805-13-git-send-email-antonio@meshcoding.com \
--to=antonio@meshcoding.com \
--cc=antonio@open-mesh.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox