From: Antonio Quartulli <antonio@meshcoding.com>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Antonio Quartulli <antonio@open-mesh.com>
Subject: [B.A.T.M.A.N.] [RFC 23/23] batman-adv: B.A.T.M.A.N. V - implement bat_orig_print API
Date: Tue, 11 Feb 2014 13:48:23 +0100 [thread overview]
Message-ID: <1392122903-805-24-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1392122903-805-1-git-send-email-antonio@meshcoding.com>
From: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
---
bat_v.c | 98 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/bat_v.c b/bat_v.c
index d05d548..6b21afe 100644
--- a/bat_v.c
+++ b/bat_v.c
@@ -64,6 +64,103 @@ static void batadv_v_ogm_emit(struct batadv_forw_packet *forw_packet)
{
}
+/**
+ * batadv_v_orig_print_neigh - print neighbors for the originator table
+ * @orig_node: the orig_node for which the neighbors are printed
+ * @if_outgoing: outgoing interface for these entries
+ * @seq: debugfs table seq_file struct
+ *
+ * Must be called while holding an rcu lock.
+ */
+static void
+batadv_v_orig_print_neigh(struct batadv_orig_node *orig_node,
+ struct batadv_hard_iface *if_outgoing,
+ struct seq_file *seq)
+{
+ struct batadv_neigh_node *neigh_node;
+ struct batadv_neigh_ifinfo *n_ifinfo;
+
+ hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) {
+ n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing);
+ if (!n_ifinfo)
+ continue;
+
+ seq_printf(seq, " %pM (%9u.%1u)",
+ neigh_node->addr,
+ n_ifinfo->bat_v.metric / 10,
+ n_ifinfo->bat_v.metric % 10);
+
+ batadv_neigh_ifinfo_free_ref(n_ifinfo);
+ }
+}
+
+/**
+ * batadv_v_orig_print - print the originator table
+ * @bat_priv: the bat priv with all the soft interface information
+ * @seq: debugfs table seq_file struct
+ * @if_outgoing: the outgoing interface for which this should be printed
+ */
+static void batadv_v_orig_print(struct batadv_priv *bat_priv,
+ struct seq_file *seq,
+ struct batadv_hard_iface *if_outgoing)
+{
+ struct batadv_neigh_node *neigh_node;
+ struct batadv_hashtable *hash = bat_priv->orig_hash;
+ int last_seen_msecs, last_seen_secs;
+ struct batadv_orig_node *orig_node;
+ struct batadv_neigh_ifinfo *n_ifinfo;
+ unsigned long last_seen_jiffies;
+ struct hlist_head *head;
+ int batman_count = 0;
+ uint32_t i;
+
+ seq_printf(seq, " %-15s %s (%11s) %17s [%10s]: %20s ...\n",
+ "Originator", "last-seen", "metric", "Nexthop",
+ "outgoingIF", "Potential nexthops");
+
+ for (i = 0; i < hash->size; i++) {
+ head = &hash->table[i];
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(orig_node, head, hash_entry) {
+ neigh_node = batadv_orig_router_get(orig_node,
+ if_outgoing);
+ if (!neigh_node)
+ continue;
+
+ n_ifinfo = batadv_neigh_ifinfo_get(neigh_node,
+ if_outgoing);
+ if (!n_ifinfo)
+ goto next;
+
+ last_seen_jiffies = jiffies - orig_node->last_seen;
+ last_seen_msecs = jiffies_to_msecs(last_seen_jiffies);
+ last_seen_secs = last_seen_msecs / 1000;
+ last_seen_msecs = last_seen_msecs % 1000;
+
+ seq_printf(seq, "%pM %4i.%03is (%9u.%1u) %pM [%10s]:",
+ orig_node->orig, last_seen_secs,
+ last_seen_msecs, n_ifinfo->bat_v.metric / 10,
+ n_ifinfo->bat_v.metric % 10,
+ neigh_node->addr,
+ neigh_node->if_incoming->net_dev->name);
+
+ batadv_v_orig_print_neigh(orig_node, if_outgoing, seq);
+ seq_puts(seq, "\n");
+ batman_count++;
+
+next:
+ batadv_neigh_node_free_ref(neigh_node);
+ if (n_ifinfo)
+ batadv_neigh_ifinfo_free_ref(n_ifinfo);
+ }
+ rcu_read_unlock();
+ }
+
+ if (batman_count == 0)
+ seq_puts(seq, "No batman nodes in range ...\n");
+}
+
static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1,
struct batadv_hard_iface *if_outgoing1,
struct batadv_neigh_node *neigh2,
@@ -112,6 +209,7 @@ static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.bat_primary_iface_set = batadv_v_primary_iface_set,
.bat_ogm_emit = batadv_v_ogm_emit,
.bat_ogm_schedule = batadv_v_ogm_schedule,
+ .bat_orig_print = batadv_v_orig_print,
.bat_neigh_cmp = batadv_v_neigh_cmp,
.bat_neigh_is_equiv_or_better = batadv_v_neigh_is_eob,
.bat_neigh_free = batadv_v_neigh_free,
--
1.8.5.3
prev parent reply other threads:[~2014-02-11 12:48 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-11 12:48 [B.A.T.M.A.N.] [RFC 00/23] Introducing a new routing protocol: B.A.T.M.A.N. V Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 01/23] batman-adv: invoke ogm_schedule() only when the interface is activated Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 02/23] batman-adv: Add hard_iface specific sysfs wrapper macros for UINT Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 03/23] batman-adv: ELP - adding basic infrastructure Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 04/23] batman-adv: ELP - creating neighbor structures Antonio Quartulli
2014-02-11 15:32 ` Andrew Lunn
2014-02-11 16:02 ` Antonio Quartulli
2014-02-11 16:11 ` Lew Pitcher
2014-02-11 16:26 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 05/23] batman-adv: ELP - exporting neighbor list via debugfs Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 06/23] batman-adv: ELP - adding sysfs parameter for elp interval Antonio Quartulli
2014-02-11 16:59 ` Andrew Lunn
2014-02-11 17:08 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 07/23] batman-adv: OGMv2 - add basic infrastructure Antonio Quartulli
2014-02-11 17:12 ` Andrew Lunn
2014-02-11 17:52 ` Antonio Quartulli
2014-02-12 7:44 ` Andrew Lunn
2014-02-12 7:58 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 08/23] batman-adv: OGMv2 - implement originators logic Antonio Quartulli
2014-02-11 17:22 ` Andrew Lunn
2014-02-11 17:30 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 09/23] batman-adv: OGMv2 - purge obsolete potential routers Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 10/23] batman-adv: split name from variable for uint mesh attributes Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 11/23] batman-adv: add throughput attribute to hard_ifaces Antonio Quartulli
2014-02-12 8:42 ` Andrew Lunn
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 12/23] batman-adv: add base throughput attribute Antonio Quartulli
2014-02-12 8:40 ` Andrew Lunn
2014-02-12 12:20 ` Antonio Quartulli
2014-02-13 9:36 ` Andrew Lunn
2014-02-13 9:53 ` Antonio Quartulli
2014-02-13 9:57 ` Andrew Lunn
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 13/23] batman-adv: add last_unicast_tx to struct neigh_node_elp Antonio Quartulli
2014-02-12 8:49 ` Andrew Lunn
2014-02-12 12:25 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 14/23] batman-adv: ELP - compute the metric based on the estimated throughput Antonio Quartulli
2014-02-12 8:58 ` Andrew Lunn
2014-02-12 12:27 ` Antonio Quartulli
2014-02-12 15:44 ` Antonio Quartulli
2014-02-13 9:45 ` Andrew Lunn
2014-02-13 9:46 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 15/23] batman-adv: ELP - send unicast ELP packets for throughput sampling Antonio Quartulli
2014-02-12 9:12 ` Andrew Lunn
2014-02-12 12:12 ` Antonio Quartulli
2014-02-12 12:54 ` Felix Fietkau
2014-02-12 12:56 ` Antonio Quartulli
2014-02-12 13:02 ` Antonio Quartulli
2014-02-13 9:55 ` Andrew Lunn
2014-02-13 10:02 ` Antonio Quartulli
2014-02-13 10:09 ` Andrew Lunn
2014-02-13 10:13 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 16/23] batman-adv: ELP - read estimated throughput from cfg80211 Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 17/23] batman-adv: ELP - implement dead neigh node detection Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 18/23] batman-adv: ELP - use phydev to determine link characteristics Antonio Quartulli
2014-02-13 8:17 ` Antonio Quartulli
2014-02-13 8:19 ` Antonio Quartulli
2014-02-13 10:52 ` Andrew Lunn
2014-02-13 11:02 ` Antonio Quartulli
2014-02-13 11:44 ` Andrew Lunn
2014-02-14 8:24 ` Antonio Quartulli
2014-02-14 17:38 ` Andrew Lunn
2014-02-14 17:46 ` Antonio Quartulli
2014-02-14 18:18 ` Andrew Lunn
2014-02-14 19:18 ` Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 19/23] batman-adv: add bat_neigh_free() API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 20/23] batman-adv: B.A.T.M.A.N. V - implement " Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 21/23] batman-adv: B.A.T.M.A.N. V - implement neigh_is_equiv_or_better API Antonio Quartulli
2014-02-11 12:48 ` [B.A.T.M.A.N.] [RFC 22/23] batman-adv: B.A.T.M.A.N. V - implement bat_neigh_cmp API Antonio Quartulli
2014-02-11 12:48 ` Antonio Quartulli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392122903-805-24-git-send-email-antonio@meshcoding.com \
--to=antonio@meshcoding.com \
--cc=antonio@open-mesh.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox