From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 29 Dec 2008 21:39:27 +0100 Message-Id: <1398907753@web.de> MIME-Version: 1.0 From: John Harris Subject: Re: [B.A.T.M.A.N.] Some questions to BATMAN Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@open-mesh.net, dondavis@reglue.org Hiii Don, thank you very much for your reply, for your help... > >> 1) >> I will build a mesh network.. One of my router is connected to my server >> with the IP 129.211.186.12. I can't make >> a traceroute through my router to this server. If I try to make >> "traceroute 129.211.186.12" from an another router I get the message: >> "PING 129.211.186.12 (129.211.186.12): 56 data bytes >> ping: sendto: Network is unreachable >=20 >=20 > router Server (129.211.186.12) > (batman eth0) <------------------> (batman some wireless device) >=20 > On the router, which firmware are you running with Batman? >=20 >=20 > When you type batmand -c -d 1 on the router /server what do you see? >=20 > What does batmand -v show on the router / server? >=20 >=20 I have some problems with my server at the moment, I will write the output = of the other commands as soon as possible... my freifunk firmware is v1.6.29 and the batmand version is :B.A.T.M.A.N. 0.= 2 rv502 (compability version 3) =20 >> I can send ping requests from my server to the router and from the >> router to the server, but as I said, I can't make a traceroute to the >> server >> from an another router. My question is, how can I do this ? >> >> In OLSR it was not a problem to trace the server through the router. >> Should I change something in HNA messages ? >> >> 2) >> I read the HowTO from Freifunk Leipzig about the configuration of >> BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the >> configuration >> If I want to run BATMAN in Ubuntu Intrepid? How can I configure the >> IPTABLES ? >> >=20 > For newer batman and experimental you'll want to open up ports 4305-4307: >=20 > iptables -t filter -I INPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT > iptables -t filter -I INPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT > iptables -t filter -I INPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT > iptables -t filter -I OUTPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT > iptables -t filter -I OUTPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT > iptables -t filter -I OUTPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT You helped me a lot so far,thank you,=20 I will write the output of the commands as soon as possible...=20 greetings, John >=20 >=20 >=20 >=20 > _______________________________________________ > B.A.T.M.A.N mailing list > B.A.T.M.A.N@open-mesh.net > https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n >=20 _______________________________________________________________________ Sensationsangebot verl=E4ngert: WEB.DE FreeDSL - Telefonanschluss + DSL f=FCr nur 16,37 Euro/mtl.!* http://dsl.web.de/?ac=3DOM.AD.AD008K15039B7069a