public inbox for b.a.t.m.a.n@lists.open-mesh.org
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCH v2 4/4] batman-adv: Fix gw_bandwidth calculation on 32 bit systems
Date: Sun, 21 Jun 2015 14:42:52 +0200	[thread overview]
Message-ID: <1434890572-3199-4-git-send-email-sven@narfation.org> (raw)
In-Reply-To: <1434890572-3199-1-git-send-email-sven@narfation.org>

The TVLV for the gw_bandwidth stores everything as u32. But the
gw_bandwidth reads the signed long which limits the maximum value to
(2 ** 31 - 1) on systems with 4 byte long. Also the input value is always
converted from either Mibit/s or Kibit/s to 100Kibit/s. This reduces the
values even further when the user sets it via the default unit Kibit/s. It
may even cause an integer overflow and end up with a value the user never
intended.

Instead read the values as u64, check for possible overflows, do the unit
adjustments and then reduce the size to u32.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
v2:
 * rebased on current master

 net/batman-adv/gateway_common.c | 49 +++++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 7 deletions(-)

diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c
index 6b930a6..058b957 100644
--- a/net/batman-adv/gateway_common.c
+++ b/net/batman-adv/gateway_common.c
@@ -18,6 +18,7 @@
 #include "gateway_common.h"
 #include "main.h"
 
+#include <asm/div64.h>
 #include <linux/atomic.h>
 #include <linux/errno.h>
 #include <linux/byteorder/generic.h>
@@ -44,7 +45,7 @@ static bool batadv_parse_gw_bandwidth(struct net_device *net_dev, char *buff,
 {
 	enum batadv_bandwidth_units bw_unit_type = BATADV_BW_UNIT_KBIT;
 	char *slash_ptr, *tmp_ptr;
-	long ldown, lup;
+	u64 ldown, lup;
 	int ret;
 
 	slash_ptr = strchr(buff, '/');
@@ -62,7 +63,7 @@ static bool batadv_parse_gw_bandwidth(struct net_device *net_dev, char *buff,
 			*tmp_ptr = '\0';
 	}
 
-	ret = kstrtol(buff, 10, &ldown);
+	ret = kstrtou64(buff, 10, &ldown);
 	if (ret) {
 		batadv_err(net_dev,
 			   "Download speed of gateway mode invalid: %s\n",
@@ -72,14 +73,31 @@ static bool batadv_parse_gw_bandwidth(struct net_device *net_dev, char *buff,
 
 	switch (bw_unit_type) {
 	case BATADV_BW_UNIT_MBIT:
-		*down = ldown * 10;
+		/* prevent overflow */
+		if (U64_MAX / 10 < ldown) {
+			batadv_err(net_dev,
+				   "Download speed of gateway mode too large: %s\n",
+				   buff);
+			return false;
+		}
+
+		ldown *= 10;
 		break;
 	case BATADV_BW_UNIT_KBIT:
 	default:
-		*down = ldown / 100;
+		do_div(ldown, 100);
 		break;
 	}
 
+	if (U32_MAX < ldown) {
+		batadv_err(net_dev,
+			   "Download speed of gateway mode too large: %s\n",
+			   buff);
+		return false;
+	}
+
+	*down = ldown;
+
 	/* we also got some upload info */
 	if (slash_ptr) {
 		bw_unit_type = BATADV_BW_UNIT_KBIT;
@@ -95,7 +113,7 @@ static bool batadv_parse_gw_bandwidth(struct net_device *net_dev, char *buff,
 				*tmp_ptr = '\0';
 		}
 
-		ret = kstrtol(slash_ptr + 1, 10, &lup);
+		ret = kstrtou64(slash_ptr + 1, 10, &lup);
 		if (ret) {
 			batadv_err(net_dev,
 				   "Upload speed of gateway mode invalid: %s\n",
@@ -105,13 +123,30 @@ static bool batadv_parse_gw_bandwidth(struct net_device *net_dev, char *buff,
 
 		switch (bw_unit_type) {
 		case BATADV_BW_UNIT_MBIT:
-			*up = lup * 10;
+			/* prevent overflow */
+			if (U64_MAX / 10 < lup) {
+				batadv_err(net_dev,
+					   "Upload speed of gateway mode too large: %s\n",
+					   slash_ptr + 1);
+				return false;
+			}
+
+			lup *= 10;
 			break;
 		case BATADV_BW_UNIT_KBIT:
 		default:
-			*up = lup / 100;
+			do_div(lup, 100);
 			break;
 		}
+
+		if (U32_MAX < lup) {
+			batadv_err(net_dev,
+				   "Upload speed of gateway mode too large: %s\n",
+				   slash_ptr + 1);
+			return false;
+		}
+
+		*up = lup;
 	}
 
 	return true;
-- 
2.1.4


  parent reply	other threads:[~2015-06-21 12:42 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-21 12:42 [B.A.T.M.A.N.] [PATCH v2 1/4] batman-adv: Return EINVAL on invalid gw_bandwidth change Sven Eckelmann
2015-06-21 12:42 ` [B.A.T.M.A.N.] [PATCH v2 2/4] batman-adv: Backport kstrtou64 for Linux < 2.6.39 Sven Eckelmann
2015-07-10  8:01   ` Marek Lindner
2015-06-21 12:42 ` [B.A.T.M.A.N.] [PATCH v2 3/4] batman-adv: Define (u|s)(8|16|32|64) limits for Linux < 3.14 Sven Eckelmann
2015-07-10  8:02   ` Marek Lindner
2015-06-21 12:42 ` Sven Eckelmann [this message]
2015-06-29  9:47   ` [B.A.T.M.A.N.] [PATCH v2 4/4] batman-adv: Fix gw_bandwidth calculation on 32 bit systems Antonio Quartulli
2015-06-29 16:16     ` Sven Eckelmann
2015-06-29 16:36       ` Antonio Quartulli
2015-07-10  8:04   ` Marek Lindner
2015-06-28 14:40 ` [B.A.T.M.A.N.] [PATCH v2 1/4] batman-adv: Return EINVAL on invalid gw_bandwidth change Marek Lindner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1434890572-3199-4-git-send-email-sven@narfation.org \
    --to=sven@narfation.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox