public inbox for b.a.t.m.a.n@lists.open-mesh.org
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCH v5 2/4] batman-adv: Modify mesh_iface outside sysfs context
Date: Mon, 13 Jun 2016 07:41:30 +0200	[thread overview]
Message-ID: <1465796492-5039-2-git-send-email-sven@narfation.org> (raw)
In-Reply-To: <1465796492-5039-1-git-send-email-sven@narfation.org>

The legacy sysfs interface to modify interfaces belonging to batman-adv
is run inside a region holding s_lock. And to add a net_device, it has
to also get the rtnl_lock. This is exactly the other way around than in
other virtual net_devices and conflicts with netdevice notifier which
executes inside rtnl_lock.

The inverted lock situation is currently solved by executing the removal
of netdevices via workqueue. The workqueue isn't executed inside
rtnl_lock and thus can independently get the s_lock and the rtnl_lock.

But this workaround fails when the netdevice notifier creates events in
quick succession and the earlier triggered removal of a net_device isn't
processed in the workqueue before the adding of the new netdevice (with
same name) event is issued.

Instead the legacy sysfs interface store events have to be enqueued in
a workqueue to loose the s_lock. The worker is then free to get the
required locks and the deadlock is avoided.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
v5:
 - rebase on top of current master
v4:
 - rebase on top of current master
v3:
 - rebased on top of current master to fix conflicts with newest patches
v2:
 - rebased on top of current master to fix conflicts with newest patches
---
 net/batman-adv/sysfs.c | 107 +++++++++++++++++++++++++++++++++++++------------
 net/batman-adv/types.h |  13 ++++++
 2 files changed, 94 insertions(+), 26 deletions(-)

diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index fe9ca94..8528959 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -37,6 +37,7 @@
 #include <linux/stddef.h>
 #include <linux/string.h>
 #include <linux/stringify.h>
+#include <linux/workqueue.h>
 
 #include "bridge_loop_avoidance.h"
 #include "distributed-arp-table.h"
@@ -828,31 +829,31 @@ static ssize_t batadv_show_mesh_iface(struct kobject *kobj,
 	return length;
 }
 
-static ssize_t batadv_store_mesh_iface(struct kobject *kobj,
-				       struct attribute *attr, char *buff,
-				       size_t count)
+/**
+ * batadv_store_mesh_iface_finish - store new hardif mesh_iface state
+ * @net_dev: netdevice to add/remove to/from batman-adv soft-interface
+ * @ifname: name of soft-interface to modify
+ *
+ * Changes the parts of the hard+soft interface which can not be modified under
+ * sysfs lock (to prevent deadlock situations).
+ *
+ * Return: 0 on success, 0 < on failure
+ */
+static int batadv_store_mesh_iface_finish(struct net_device *net_dev,
+					  char ifname[IFNAMSIZ])
 {
-	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
 	struct net *net = dev_net(net_dev);
 	struct batadv_hard_iface *hard_iface;
-	int status_tmp = -1;
-	int ret = count;
+	int status_tmp;
+	int ret = 0;
+
+	ASSERT_RTNL();
 
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);
 	if (!hard_iface)
-		return count;
-
-	if (buff[count - 1] == '\n')
-		buff[count - 1] = '\0';
-
-	if (strlen(buff) >= IFNAMSIZ) {
-		pr_err("Invalid parameter for 'mesh_iface' setting received: interface name too long '%s'\n",
-		       buff);
-		batadv_hardif_put(hard_iface);
-		return -EINVAL;
-	}
+		return 0;
 
-	if (strncmp(buff, "none", 4) == 0)
+	if (strncmp(ifname, "none", 4) == 0)
 		status_tmp = BATADV_IF_NOT_IN_USE;
 	else
 		status_tmp = BATADV_IF_I_WANT_YOU;
@@ -861,15 +862,13 @@ static ssize_t batadv_store_mesh_iface(struct kobject *kobj,
 		goto out;
 
 	if ((hard_iface->soft_iface) &&
-	    (strncmp(hard_iface->soft_iface->name, buff, IFNAMSIZ) == 0))
+	    (strncmp(hard_iface->soft_iface->name, ifname, IFNAMSIZ) == 0))
 		goto out;
 
-	rtnl_lock();
-
 	if (status_tmp == BATADV_IF_NOT_IN_USE) {
 		batadv_hardif_disable_interface(hard_iface,
 						BATADV_IF_CLEANUP_AUTO);
-		goto unlock;
+		goto out;
 	}
 
 	/* if the interface already is in use */
@@ -877,15 +876,71 @@ static ssize_t batadv_store_mesh_iface(struct kobject *kobj,
 		batadv_hardif_disable_interface(hard_iface,
 						BATADV_IF_CLEANUP_AUTO);
 
-	ret = batadv_hardif_enable_interface(hard_iface, net, buff);
-
-unlock:
-	rtnl_unlock();
+	ret = batadv_hardif_enable_interface(hard_iface, net, ifname);
 out:
 	batadv_hardif_put(hard_iface);
 	return ret;
 }
 
+/**
+ * batadv_store_mesh_iface_work - store new hardif mesh_iface state
+ * @work: work queue item
+ *
+ * Changes the parts of the hard+soft interface which can not be modified under
+ * sysfs lock (to prevent deadlock situations).
+ */
+static void batadv_store_mesh_iface_work(struct work_struct *work)
+{
+	struct batadv_store_mesh_work *store_work;
+	int ret;
+
+	store_work = container_of(work, struct batadv_store_mesh_work, work);
+
+	rtnl_lock();
+	ret = batadv_store_mesh_iface_finish(store_work->net_dev,
+					     store_work->soft_iface_name);
+	rtnl_unlock();
+
+	if (ret < 0)
+		pr_err("Failed to store new mesh_iface state %s for %s: %d\n",
+		       store_work->soft_iface_name, store_work->net_dev->name,
+		       ret);
+
+	dev_put(store_work->net_dev);
+	kfree(store_work);
+}
+
+static ssize_t batadv_store_mesh_iface(struct kobject *kobj,
+				       struct attribute *attr, char *buff,
+				       size_t count)
+{
+	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
+	struct batadv_store_mesh_work *store_work;
+
+	if (buff[count - 1] == '\n')
+		buff[count - 1] = '\0';
+
+	if (strlen(buff) >= IFNAMSIZ) {
+		pr_err("Invalid parameter for 'mesh_iface' setting received: interface name too long '%s'\n",
+		       buff);
+		return -EINVAL;
+	}
+
+	store_work = kmalloc(sizeof(*store_work), GFP_KERNEL);
+	if (!store_work)
+		return -ENOMEM;
+
+	dev_hold(net_dev);
+	INIT_WORK(&store_work->work, batadv_store_mesh_iface_work);
+	store_work->net_dev = net_dev;
+	strlcpy(store_work->soft_iface_name, buff,
+		sizeof(store_work->soft_iface_name));
+
+	queue_work(batadv_event_workqueue, &store_work->work);
+
+	return count;
+}
+
 static ssize_t batadv_show_iface_status(struct kobject *kobj,
 					struct attribute *attr, char *buff)
 {
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 0eeb68f..81de9be 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -1562,4 +1562,17 @@ enum batadv_tvlv_handler_flags {
 	BATADV_TVLV_HANDLER_OGM_CALLED = BIT(2),
 };
 
+/**
+ * struct batadv_store_mesh_work - Work queue item to detach add/del interface
+ *  from sysfs locks
+ * @net_dev: netdevice to add/remove to/from batman-adv soft-interface
+ * @soft_iface_name: name of soft-interface to modify
+ * @work: work queue item
+ */
+struct batadv_store_mesh_work {
+	struct net_device *net_dev;
+	char soft_iface_name[IFNAMSIZ];
+	struct work_struct work;
+};
+
 #endif /* _NET_BATMAN_ADV_TYPES_H_ */
-- 
2.8.1


  reply	other threads:[~2016-06-13  5:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-13  5:41 [B.A.T.M.A.N.] [PATCH v5 1/4] Revert "batman-adv: Fix hardif remove/add race" Sven Eckelmann
2016-06-13  5:41 ` Sven Eckelmann [this message]
2016-06-20  8:36   ` [B.A.T.M.A.N.] [PATCH v5 2/4] batman-adv: Modify mesh_iface outside sysfs context Marek Lindner
2016-06-13  5:41 ` [B.A.T.M.A.N.] [PATCH v5 3/4] batman-adv: Revert "postpone sysfs removal when unregistering" Sven Eckelmann
2016-06-20  8:37   ` Marek Lindner
2016-06-13  5:41 ` [B.A.T.M.A.N.] [PATCH v5 4/4] batman-adv: Avoid sysfs name collision for netns moves Sven Eckelmann
2016-06-20  8:37   ` Marek Lindner
2016-06-20  8:36 ` [B.A.T.M.A.N.] [PATCH v5 1/4] Revert "batman-adv: Fix hardif remove/add race" Marek Lindner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465796492-5039-2-git-send-email-sven@narfation.org \
    --to=sven@narfation.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox