public inbox for b.a.t.m.a.n@lists.open-mesh.org
 help / color / mirror / Atom feed
* [B.A.T.M.A.N.] Question about sliding windows in Batman-adv 2015.0
@ 2016-01-19 13:34 Jérôme GRIES
  2016-01-20  1:38 ` Marek Lindner
  0 siblings, 1 reply; 2+ messages in thread
From: Jérôme GRIES @ 2016-01-19 13:34 UTC (permalink / raw)
  To: b.a.t.m.a.n

Hello everybody (thx to Marek Lindner for the answer)

My name is Jérôme, i'm a French student  in informatics and networks, 
for a project i use BATMAN ( i use it with raspberry Pi in cars).

I would like to change the duration of the sliding windows, i understand 
that the duration of the sliding windows is equals to 128*intervall it 
(intervall beetween every hello packets)

So normally the sliding windows is equals to 128 seconds because the 
interval is 1s in default mode.

I would like to change  the code to change this duration but not just 
with the interval it value but directly with the 128. Because when i use 
this protocol in a mobile environment like cars this value is to high, 
and i would like to reduce in something like sliding windows duration = 
30*5(=interval it which i can change easily).


Could you tell me where i can find something like that in the code :

#define _timeslidingwindows 128



Thank you and have a nice day.

Jérôme Gries





^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2016-01-20  1:38 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-19 13:34 [B.A.T.M.A.N.] Question about sliding windows in Batman-adv 2015.0 Jérôme GRIES
2016-01-20  1:38 ` Marek Lindner

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox