From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Gioacchino Mazzurco Date: Sat, 11 Feb 2012 17:51:53 +0100 Message-ID: <1590796.df4KKcFED8@g10h4cklab> In-Reply-To: <201202111758.29202.lindner_marek@yahoo.de> References: <1807712.xKAsDcUsSn@g10h4cklab> <201202111758.29202.lindner_marek@yahoo.de> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Subject: Re: [B.A.T.M.A.N.] batman openwrt Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: The list for a Better Approach To Mobile Ad-hoc Networking Ok so it is not a well known bug There are some infos: root@OpenWrt:~# batctl if ath0: active root@OpenWrt:~# cat /etc/eigennet/version Build Info: OpenWrt Path: . URL: svn://svn.openwrt.org/openwrt/branches/backfire Repository Root: svn://svn.openwrt.org/openwrt Repository UUID: 3c298f89-4303-0410-b956-a3cf2f4a3e73 Revision: 30330 Node Kind: directory Schedule: normal Last Changed Author: jow Last Changed Rev: 30306 Last Changed Date: 2012-02-05 18:15:40 +0100 (Sun, 05 Feb 2012) Feeds packages Path: . URL: svn://svn.openwrt.org/openwrt/packages Repository Root: svn://svn.openwrt.org/openwrt Repository UUID: 3c298f89-4303-0410-b956-a3cf2f4a3e73 Revision: 30330 Node Kind: directory Schedule: normal Last Changed Author: jow Last Changed Rev: 30328 Last Changed Date: 2012-02-06 12:54:43 +0100 (Mon, 06 Feb 2012) zzzeigennet URL: git://gitorious.org/eigennet/packages.git commit d66e3ad00c920213f0ae5ddaa94e14797256570f Author: Gioacchino Mazzurco Date: Sun Feb 5 18:41:30 2012 +0100 gw_mode client enabled by default root@OpenWrt:~# cat /etc/config/batman-adv config 'mesh' 'bat0' option 'fragmentation' '1' option 'gw_mode' 'client' list 'interfaces' 'clients' list 'interfaces' 'nmeshwifi0' root@OpenWrt:~# cat /etc/config/network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' option 'ip6addr' '0::1/128' config 'interface' 'clients' option 'proto' 'static' option 'type' 'bridge' list 'ifname' 'bat0' list 'ifname' 'eth0' option 'ip6addr' '2001:470:ca42:ee:ab:0015:6DFD:71F6/64' option 'ip6gw' '2001:470:ca42:ee:ab::1000' option 'ipaddr' '192.168.1.21' option 'netmask' '255.255.255.0' config 'interface' 'nmeshwifi0' option 'proto' 'static' option 'mtu' '1528' option 'ip6addr' 'eeab:20::1/64' option 'ipaddr' '192.168.20.21' option 'netmask' '255.255.255.0' root@OpenWrt:~# cat /etc/config/wireless config 'wifi-device' 'wifi0' option 'type' 'atheros' option 'channel' '8' option 'disabled' '0' option 'txpower' '30' config 'wifi-iface' 'meshwifi0' option 'device' 'wifi0' option 'network' 'nmeshwifi0' option 'sw_merge' '1' option 'mode' 'adhoc' option 'bssid' '02:aa:bb:cc:dd:ee' option 'ssid' 'www.eigenlab.org-www.ninux.org' option 'encryption' 'none' option 'mcast_rate' '6000' config 'wifi-iface' 'apwifi0' option 'device' 'wifi0' option 'network' 'clients' option 'sw_merge' '1' option 'mode' 'ap' option 'ssid' 'eigenNet' option 'encryption' 'none' option 'maxassoc' '20' root@OpenWrt:~# ip a s 1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:15:6d:fd:71:f6 brd ff:ff:ff:ff:ff:ff inet6 fe80::215:6dff:fefd:71f6/64 scope link valid_lft forever preferred_lft forever 3: br-clients: mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:15:6d:fd:71:f6 brd ff:ff:ff:ff:ff:ff inet 192.168.1.21/24 brd 192.168.1.255 scope global br-clients inet6 2001:470:ca42:ee:ab:15:6dfd:71f6/64 scope global valid_lft forever preferred_lft forever inet6 fe80::215:6dff:fefd:71f6/64 scope link valid_lft forever preferred_lft forever 4: wifi0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 195 link/ieee802.11 00:15:6d:fc:71:f6 brd ff:ff:ff:ff:ff:ff 5: ath0-1: mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:15:6d:fc:71:f6 brd ff:ff:ff:ff:ff:ff inet6 fe80::215:6dff:fefc:71f6/64 scope link valid_lft forever preferred_lft forever 6: ath0: mtu 1528 qdisc noqueue state UNKNOWN link/ether 06:15:6d:fc:71:f6 brd ff:ff:ff:ff:ff:ff inet 192.168.20.21/24 brd 192.168.20.255 scope global ath0 inet6 eeab:20::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::415:6dff:fefc:71f6/64 scope link valid_lft forever preferred_lft forever 7: bat0: mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:da:76:30:f6:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::24da:76ff:fe30:f648/64 scope link valid_lft forever preferred_lft forever adding by hand br-clients to batman with batctl if add br-clients work without problem the same beaviour on devices where eth0 is not bridged thanks for help P.S. as you can see I am using packages from trunk On Saturday 11 February 2012 17:58:28 Marek Lindner wrote: > Hi, > > > After upgrading to latest batman version on openwt batman stopped adding > > ethernet or bridge interfaces at start... > > > > it add only wireless interfaces > > > > I am using backfire for the core and trunk for packages the problem is > > related to that? > > can you post your /etc/config/batman-adv and as well as the batman-adv > package version you are using ? Did you switch to the latest and greatest ? > > Cheers, > Marek