[B.A.T.M.A.N.] Re: Batman problem with tun0

[B.A.T.M.A.N.] Re: Batman problem with tun0

[Anton Gillert]

> Hi,
>
>   
>> I have two Asus wl500gp router, each with atheros(Atheros 5212)
>> wlancards, running kamikaze 7.06; kernel ver.:2.6.19.2. and B.A.T.M.A.N.
>> 0.2 rv451 (compability version 3)
>> one of them has access to the internet.
>> The one who has no internet connection, doesn't set a default route to
>> the one who has. It only sets this routes:
>>     
>
> it looks quite good so far. Blocked TCP is the most obvious reason that the 
> tun device does not appear. the client tries to establish a TCP control 
> channel (port 1967) to the gateway. If that connection attempt is ignored no 
> default route will be set.
>
> Regards,
> Marek
>
>   
Hello,

thanks for replying so fast. Unfortunately the reason isn't the blocked 
tcp-port, I tested it after I shutdown the firewall on each node with 
the same result as you can see above. Is there something else I can do?

Best regards

Anton

Re: [B.A.T.M.A.N.] Re: Batman problem with tun0

[Marek Lindner]

Hi,

> thanks for replying so fast. Unfortunately the reason isn't the blocked
> tcp-port, I tested it after I shutdown the firewall on each node with
> the same result as you can see above. Is there something else I can do?

Sure. You can debug this by using tcpdump. Use the following call to see the 
batman TCP and UDP gateway connections: tcpdump -ni <your_wifi_dev> port 1967
Best would be to send it to me, so that I can say a few words about your 
problem.  :-)

Regards,
Marek